Glass Passivated High Efficient Plastic Rectifiers
EGP20A THRU EGP20K
Features
2.0 AMPS. Glass Passivated High Efficient Plastic Rectifiers
Voltage Range 50 to 800 Volts...
Description
EGP20A THRU EGP20K
Features
2.0 AMPS. Glass Passivated High Efficient Plastic Rectifiers
Voltage Range 50 to 800 Volts
Current 2.0 Amperes
DO-15
Plastic material used carries Underwriters Laboratory Classification 94V-0 Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability High temperature metallurgically bonded construction High temperature soldering guaranteed: 300℃/10 seconds, .375”(9.5mm) lead length at 5 lbs., (2.3kg) tension
Mechanical Data
Cases: JEDEC DO-15 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.015 ounce, 0.4 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
Symbol EGP EGP EGP EGP EGP EGP EGP 20A 20B 20D 20F 20G 20J 20K
Maximum Recurrent Peak Reverse Voltage
VRRM 50 100 200 300 400 600 800
Maximum RMS Voltage
VRMS 35 70 140 210 280 420 560
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @ TA = 55℃
VDC 50 100 200 300 400 600 800
I(AV)
2.0
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method )
IF...
Similar Datasheet