Glass Passivated High Efficient Plastic Rectifiers
EGP30A THRU EGP30K
Features
3.0 AMPS. Glass Passivated High Efficient Plastic Rectifiers
Voltage Range 50 to 800 Volts...
Description
EGP30A THRU EGP30K
Features
3.0 AMPS. Glass Passivated High Efficient Plastic Rectifiers
Voltage Range 50 to 800 Volts
Current 3.0 Amperes
DO-201
Plastic material used carries Underwriters Laboratories Classification 94V-O Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability High temperature metallurgically bonded construction High temperature soldering guaranteed: 300℃ / 10seconds, .375”(9.5mm) lead length at 5 lbs., (2.3kg) tension
Mechanical Data
Case: JEDEC DO-201 molded plastic over solid glass body Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.048 ounce, 1.28 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Type Number
Symbol EGP EGP EGP EGP EGP EGP EGP 30A 30B 30D 30F 30G 30J 30K
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375”(9.5mm) Lead Length @ TA = 55℃
VRRM VRMS VDC
I(AV)
50 100 200 300 400 600 800 35 70 140 210 280 420 560 50 100 200 300 400 600 800
3.0
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC meth...
Similar Datasheet