VSKD91.., VSKC91.., VSKJ91.., VSKE91.. Series
www.vishay.com
Vishay Semiconductors
ADD-A-PAK Generation VII Power Modules Standard Diodes, 100 A
ADD-A-PAK
PRODUCT SUMMARY
IF(AV)
100 A
Type
Modules - Diode, High Voltage
MECHANICAL DESCRIPTION
The ADD-A-PAK generation VII, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces.
FEATURES • High voltage • Industrial standard package • UL approved file E78996 • Low thermal resistance • Designed and qualified for industrial level • Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
BENEFITS • Excellent thermal performances obtained by the usage of
exposed direct bonded copper substrate • Up to 1600 V • High surge capability • Easy mounting on heatsink
ELECTRICAL DESCRIPTION These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IF(AV) IF(RMS)
IFSM
112 °C
50 Hz 60 Hz
50 Hz I2t
60 Hz
I2√t
VRRM TJ TStg
Range
VALUES 100 157 2020 2115 20.41 18.63 204.1
400 to 1600
- 40 to 150
UNITS
A
kA2s kA2√s
V °C
Revision: 06-Jun-12
1 Document Number: 94627
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSKD91.., VSKC91.., VSKJ91.., VSKE91.. Series
www.vishay.com
Vishay Semiconductors
ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
TYPE NUMBER
VOLTAGE CODE
VSK.91
04 06 08 10 12 14 16
VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 400
600
800
1000
1200
1400
1600
VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 500
700
900
1100
1300
1500
1700
IRRM MAXIMUM AT TJ = 150 °C
mA
10
FORWARD CONDUCTION
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum average forward current at case temperature
IF(AV)
180° conduction, half sine wave
Maximum RMS forward current
IF(RMS)
Maximum peak, one-cycle forward, non-repetitive surge current
IFSM
Maximum I2t for fusing
I2t
Maximum I2√t for fusing
Low level value of threshold voltage
High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum forward voltage drop
I2√t VF(TO)1 VF(TO)2
rf1
rf2 VFM
DC at 90 °C case temperature
t = 10 ms No voltage t = 8.3 ms reapplied
t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms
100 % VRRM reapplied
No voltage reapplied
Sinusoidal half wave, intitial TJ = TJ maximum
t = 10 ms t = 8.3 ms
100 % VRRM reapplied
t = 0.1 ms to 10 ms, no voltage reapplied
(16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum (I > π x IF(AV)), TJ = TJ maximum
(16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum
(I > π x IF(AV)), TJ = TJ maximum IFM = π x IF(AV), TJ = 25 °C, tp = 400 μs square wave
VALUES 100 112 157 2020 2115 1700 1780 20.41 18.63 14.44 13.18 204.1 0.76 0.89
2.4
2.05
1.55
UNITS A °C
A
kA2s kA2√s
V
mΩ V
BLOCKING
PARAMETER Maximum peak reverse leakage current
SYMBOL
TEST CONDITIONS
IRRM
TJ = 150 °C
Maximum RMS insulation voltage
VINS
50 Hz
VALUES
10
3000 (1 min) 3600 (1 s)
UNITS mA V
Revision: 06-Jun-12
2 Document Number: 94627
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VSKD91.., VSKC91.., VSKJ91.., VSKE91.. Series
www.vishay.com
Vishay Semiconductors
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Junction and storage temperature range
Maximum internal thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink per module
TJ, TStg RthJC RthCS
DC operation Mounting surface flat, smooth and greased
- 40 to 150 0.22 0.1
°C °C/W
Mounting torque ± 10 %
to heatsink busbar
A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound.
4 3
Nm
Approximate weight
75 g 2.7 oz.
Case style
JEDEC
ADD-A-PAK Gen. VII (TO-240AA)
ΔR CONDUCTION PER JUNCTION
DEVICES
SINE HALF WAVE CONDUCTION
180°
120°
90°
60°
30°
VSK.91
0.057 0.068 0.087
0.12
0.177
RECTANGULAR WAVE CONDUCTION
180°
120°
90°
60°
30°
0.045
0.073
0.093
0.123
0.178
Note • Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
UNITS °C/W
Revision: 06-Jun-12
3 Document Nu.