Optical Switch
Photologic® Slotted Optical Switch
OPB917 Series
Features:
Low power consumption Data rates to 250 kBaud Choic...
Description
Photologic® Slotted Optical Switch
OPB917 Series
Features:
Low power consumption Data rates to 250 kBaud Choice of two logic states and two electrical outputs 24” (610 mm) minimum 26 AWG UL listed wires Slot width 0.20” (5.08 mm) Slot Depth 0.86” (21.84 mm)
Description: The OPB917 series of Photologic® photo integrated circuit switches provide optimum flexibility. Each switch consists of an infrared Light Emitting Diode (LED) and a Photologic® photo integrated circuit, mounted in an opaque housing with clear windows for dust protection. The deep slot allows for a longer reach of the optical path from the 0.650” (16.5 mm) mounting plane. Internal apertures are 0.010” x .060” (.25 mm x 1.52 mm) for the Photologic’s “S” side and 0.05” x 0.06” (1.27 mm x 1.52 mm) for the LED “E” side.
Devices in this series exhibit stable performance over supply voltages ranging from 4.5 V to 16.0 V, and may be specified as buffered or inverted with an internal 10 kΩ pull-up resistor or open collector output. Devices are TTL/ LSTTL compatible and can drive up to 10 TTL loads.
Custom electrical, wire or cabling are available. Contact your local representative or OPTEK for more information.
Applications: Mechanical switch replacement Speed indication (tachometer) Mechanical limit indication Edge sensing
Color Description Red Anode Black Cathode White Vcc Blue Output Green Ground
Part Number
OPB917BZ OPB917IZ OPB917BOCZ OPB917IOCZ
LED Peak Wavelength
880 nm
OPB917BZ 10...
Similar Datasheet