Power Relay
Characteristics
Parameter
Blocking Voltage Load Current, TA=25°C:
With 5°C/W Heat Sink No Heat Sink On-Resistance RθJC
...
Description
Characteristics
Parameter
Blocking Voltage Load Current, TA=25°C:
With 5°C/W Heat Sink No Heat Sink On-Resistance RθJC
Rating 60
8.5 3.5 0.3 0.35
Units VP
Arms
Ω °C/W
Features
8.5Arms Load Current with 5°C/W Heat Sink Low 0.3Ω On-Resistance 60VP Blocking Voltage 2500Vrms Input/Output Isolation Low Thermal Resistance (0.35 °C/W) Electrically Non-conductive Thermal Pad for Heat
Sink Applications Low Drive Power Requirements Arc-Free With No Snubbing Circuits No EMI/RFI Generation Machine Insertable, Wave Solderable
Applications
Industrial Controls / Motor Control Robotics Medical Equipment—Patient/Equipment Isolation Instrumentation
Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Transportation Equipment Aerospace/Defense
Approvals
UL 508 Certified Component: File E69938
Pin Configuration
CPC1908
Single-Pole, Normally Open i4-PAC™ Power Relay
Description
Clare and IXYS have combined to bring OptoMOS® technology, reliability and compact size to a new family of high-power Solid State Relays.
As part of this family, the CPC1908 single-pole normally open (1-Form-A) Solid State Power Relay is rated for up to 8.5Arms continuous load current with a 5°C/W heat sink.
The CPC1908 employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The output, constructed with efficient MOSFET switches and photovoltaic die, uses Clare’s patented OptoMOS architecture...
Similar Datasheet