ER2C

ER2A-ER2J Surface Mount Rectifiers VOLTAGE RANGE: 50 --- 600 V CURRENT: 2.0 A 3.6± 0.3 Features Low cost Low leakage Low forward voltage drop High current capability Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 2.0± 0.15 SMB 4.7± 0.25 5.4± 0.2 2.3± 0.15 Mechanical Data Case:JEDEC DO-214AA,molded plastic Polarity: Color band denotes cathode Weight: 0.003 ounces,0.093 grams Mounting position: Any 0.203MAX 1.3± 0.2 0.2± 0.05 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Dimensions in millimeters Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ER2A ER2B ER2C ER2D ER2E ER2G ER2J UNITS Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage VRRM VRMS VDC 50 35 50 Maximum average forw ard rectified current @TA=75 Peak forw ard surge current IF(AV) 8.3ms single half-sine-w ave IFSM superimposed on rated load @TJ=125 Maximum instantaneous forw ard voltage @ 2.0A VF Maximum reverse current @TA=25 at rated DC blocking voltage @TA=125 IR Maximum reverse recovery time (Note 1) trr Typical junction capacitance (Note 2) CJ Typical thermal resistance (Note 3) RθJA Operating junction temperature range TJ Storage temperature range TSTG NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A. 2. Measured at 1.0MHz and applied rev erse v oltage of 4.0V DC. 3....