ER3G

ER3A-ER3J Surface Mount Rectifiers VOLTAGE RANGE: 50 --- 600 V CURRENT: 3.0 A Features Low cost Low leakage Low forward voltage drop High current capability Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 Mechanical Data Case:JEDEC DO-214AB,molded plastic Polarity: Color band denotes cathode Weight: 0.007 ounces,0.21 grams Mounting position: Any 2.4± 0.2 3.0± 0.15 DO - 214AB(SMC) 7.5± 0.25 5.8± 0.3 8.3± 0.2 1.5± 0.25 0.25± 0.06 0.203MAX Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ER3A ER3B ER3C ER3D ER3E ER3G ER3J UNITS Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage VRRM VRMS VDC 50 35 50 Maximum average forw ard rectified current @TA=75 Peak forw ard surge current IF(AV) 8.3ms single half-sine-w ave IFSM superimposed on rated load @TJ=125 Maximum instantaneous forw ard voltage @ 3.0A VF Maximum reverse current @TA=25 at rated DC blocking voltage @TA=125 IR Maximum reverse recovery time (Note 1) trr Typical junction capacitance (Note 2) CJ Typical thermal resistance (Note 3) RθJA Operating junction temperature range TJ Storage temperature range TSTG NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A. 2. Measured at 1.0MHz and applied rev erse v oltage of 4....