DatasheetsPDF.com

SMC51 Dataheets PDF



Part Number SMC51
Manufacturers MIC
Logo MIC
Description GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
Datasheet SMC51 DatasheetSMC51 Datasheet (PDF)

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 1500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% • Excel.

  SMC51   SMC51


Document
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 1500 Watts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% • Excellent clamping capability • Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types • For devices with V(BR)≥10V, ID are typically less 1.0μA • High temperature soldering guaranteed: 250℃/10 seconds at terminals MECHANICAL DATA DO-214AB(SMC) Dimensions in inches and (millimeters) • Cass: JEDEC DO-214 AB, molded plastic over passivated junction • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: For uni-direction types the Color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation • Mounting Position: any • Weight: 0.007 ounces, 0.21 gram DEVICES FOR BIDRECTIONAL APPLICATIONS • For bidirectional use suffix C or CA for types SMC-5.0 thru SMC-170 (e.g. SMC5.0C, SMC170CA). Electrical characteristics apply in both in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1.2,FIG.1) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Notes 2,3) – unidirectional only Maximum instantaneous forward voltage at 100A (NOTE3) unidirectional only Operating Junction and Storage Temperature Range Symbols PPPM IPPM IFSM VF TJ, TSTG Value Minimum1500 See Table 1 200.0 3.5 50 to + 150 Unit Watts Amps Amps Volts ℃ Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2 2. Mounted on 0.31×0.31” (8.0×8.0mm) copper pads to each terminal 3. Measured on 8.3ms single half sine-wave. For uni-directional devices only. Web Site: www.hkmic.com GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS SMC5.0 THRU SMC170CA Electrical Characteristic (TA =25℃ unless otherwise noted) Table 1 Device Type SMC5.0 Device Marking Code UNI BI 5V0 5V0C Breakdown Voltage V(BR) (Volts) (Note 1) MIN MAX 6.4 7.82 Test Current at IT (mA) 10 Stand-off Voltage VWM (Volts) 5 SMC5.0A 5V0A 5V0CA 6.4 7.07 10 5 SMC6.0 6V0 6V0C 6.67 8.15 10 6 SMC6.0A 6V0A 6V0CA 6.67 7.37 10 6 SMC6.5 6V5 6V5C 7.22 8.82 10 6.5 SMC6.5A 6V5A 6V5CA 7.22 7.98 10 6.5 SMC7.0 7V0 7V0C 7.78 9.51 10 7 SMC7.0A 7V0A 7V0CA 7.78 8.6 10 7 SMC7.5 7V5 7V5C 8.33 10.2 1 7.5 SMC7.5A 7V5A 7V5CA 8.33 9.21 1 7.5 SMC8.0 8V0 8V0C 8.89 10.9 1 8 SMC8.0A 8V0A 8V0CA 8.89 9.83 1 8 SMC8.5 8V5 8V5C 9.44 11.5 1 8.5 SMC8.5A 8V5A 8V5CA 9.44 10.4 1 8.5 SMC9.0 9V0 9V0C 10 12.2 1 9 SMC9.0A 9V0A 9V0CA 10 11.1 1 9 SMC10 10V 10VC 11.1 13.6 1 10 SMC10 A 10VA 10VCA 11.1 12.3 1 10 SMC11 11V 11VC 12.2 14.9 1 11 SMC11A 11VA 11VCA 12.2 13.5 1 11 SMC12 12V 12VC 13.3 16.3 1 12 SMC12A 12VA 12VCA 13.3 14.7 1 12 SMC13 13V 13VC 14.4 17.6 1 13 SMC13A 13VA 13VCA 14.4 15.9 1 13 SMC14 14V 14VC 15.6 19.1 1 14 SMC14A 14VA 14VCA 15.6 17.2 1 14 SMC15 15V 15VC 16.7 20.4 1 15 SMC15A 15VA 15VCA 16.7 18.5 1 15 SMC16 16V 16VC 17.8 21.8 1 16 SMC16A 16VA 16VCA 17.8 19.7 1 16 SMC17 17V 17VC 18.9 23.1 1 17 SMC17A 17VA 17VCA 18.9 20.9 1 17 SMC18 18V 18VC 20 24.4 1 18 SMC18A 18VA 18VCA 20 22.1 1 18 SMC20 20V 20VC 22.2 27.1 1 20 SMC20A 20VA 20VCA 22.2 24.5 1 20 SMC22 22V 22VC 24.4 29.8 1 22 SMC22A 22VA 22VCA 24.4 26.9 1 22 SMC24 24V 24VC 26.47 32.6 1 24 SMC24A 24VA 24VCA 26.7 29.5 1 24 SMC26 26V 26VC 28.9 35.3 1 26 SMC26A 26VA 26VCA 28.9 31.9 1 26 SMC28 28V 28VC 31.1 38 1 28 SMC28A 28VA 28VCA 31.1 34.4 1 28 SMC30 30V 30VC 33.3 40.7 1 30 SMC30A 30VA 30VCA 33.3 36.8 1 30 SMC33 33V 33VC 36.7 44.9 1 33 SMC33A 33VA 33VCA 36.7 40.6 1 33 Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 1500 Watts Maximum Reverse Leakage at VWM (Note 3) ID (μA) 1000 1000 1000 1000 500 500 200 200 100 100 50 50 20 20 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Peak Pulse Surge Current IPPM (Note 2)(Amps) 156.3 163 131.6 145.6 122 133.9 112.8 125 104.9 116.3 100 110.3 94.3 104.2 88.8 97.4 79.8 88.2 74.6 82.4 68.2 75.4 63 69.8 58.1 64.7 55.8 61.5 52.1 57.7 49.2 54.3 46.6 51.4 41.9 46.3 38.1 42.3 34.9 38.6 32.2 35.6 30 33 28 31 25.4 28.1 Maximum Clamping Voltage at IPPM VC (Volts) 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12 14.3 12.9 15 13.6 15.9 14.4 16.9 15.4 1838 17 20.1 18.2 22 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43 38.9 46.6 42.1 50 .


SMC48A SMC51 SMC51A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)