No. | Part # | Manufacturer | Description | Datasheet |
---|---|---|---|---|
|
|
ETC |
Gigabit Interconnect Chip • ANSI X3T11 Compliant Fibre Channel and IEEE 802.3z Compliant Gigabit Ethernet Transceiver • Over 2Gb/s Duplex Raw Data Rate • Redundant PECL Tx Outputs and Rx Inputs • 8B/10B Encoder/Decoder, Optional Encoder/ Decoder Bypass Operation • “ASIC-Frien |
|
|
|
ETC |
High-Speed Octal Programmable Timing Generator • 8 Fully Integrated Timing Generators for ATE Applications • 10/5ns Delay Range, 10ps Resolution • Fully Digital Interface. No Off-Chip DACs or Trim Components Required • ± 4 LSB Differential Non-Linearity High-Speed Octal Programmable Timing Gener |
|
|
|
ETC |
SONET/SDH 3.2Gb/s Laser Diode Driver • Rise Times Less Than 100ps • High Speed Operation (Up to 3.2Gb/s NRZ Data) • Differential or Single-Ended Inputs • Single Supply • ECL Compatible Clock and Data Inputs • Direct Access to Modulation and Bias FETs • Data Density Monitors • On-chip Re |
|
|
|
ETC |
10-Bit Transceiver for Fibre Channel and Gigabit Ethernet • 802.3z Gigabit Ethernet-Compliant 1.25 Gb/s Transceiver • ANSI X3T11 Fibre Channel-Compliant 1.0625 Gb/s Transceiver • 0.98 to 1.36 Gb/s Full-Duplex Operation • 10-Bit TTL Interface for Transmit and Receive Data 10-Bit Transceiver for Fibre Channe |
|
|
|
ETC |
Dual Speed 10-bit Serializer/Deserializer and Benefits • Dual Speed Operation: - Fibre Channel: 1.06/2.12 Gb/s - Gigabit Ethernet: 1.25 Gb/s - InfiniBandTM: 2.5 Gb/s • 10-bit, SSTL_2 or SSTL_3 Interface • HSPI Interface Compliant • ASIC-FriendlyTM Timing to the Transmitter • Separate Transmi |
|
|
|
ETC |
10-bit Transceiver for Fibre Channel and Gigabit Ethernet • 802.3z Gigabit Ethernet Compliant 1.25 Gb/s Transceiver • ANSI X3T11 Fibre Channel Compliant 1.0625 Gb/s Transceiver • 0.98 to 1.36 Gb/s Full Duplex Operation • 10 Bit TTL Interface for Transmit and Receive Data 10-bit Transceiver for Fibre Channe |
|
|
|
ETC |
Single Supply 2.5Gb/s Voltage Driver • Typical Rise Times of 100ps • High-Speed Operation (Up to 2.5Gb/s NRZ Data) • 3V Output Voltage Compliance • Single-Ended or Differential Input Operation • Single Power Supply: +5V or -5.2V • Direct Access to Modulation and Bias FETs • On-Die MUX f |
|
|
|
ETC |
3.125Gb/s CML Limiting Amplifier with LOS Detect • 3.3V or 5V Power Supply • Typical Supply Current of 32mA • Current-Mode Logic Outputs • Optional Output Squelch • Loss of Signal Detect • Output Offset Correction • Rise/Fall Times Faster than 100ps • Packages: TSSOP-16, Bare Die 3.125Gb/s CML Lim |
|
|
|
ETC |
1.0625 Gbits/sec Fibre Channel Transceiver • ANSI X3T11 Fibre Channel Compatible 1.0625 Gbps Full-duplex Transceiver • 10 Bit TTL Interface for Transmit and Receive Data • Monolithic Clock Synthesis and Clock Recovery - No External Components 1.0625 Gbits/sec Fibre Channel Transceiver • 106 |
|
|
|
ETC |
Link Replicator for Fibre Channel/ Gigabit Ethernet • Replicates Fibre Channel, Gigabit Ethernet and HDTV Links • T11 Fibre Channel Compliant at 1.0625Gb/s • IEEE802.3z Gigabit Ethernet Compliant at 1.25Gb/s • SMPTE-292M Compliant at 1.485Gb/s Link Replicator for Fibre Channel, Gigabit Ethernet and H |
|
|
|
ETC |
SONET/SDH 2.5Gb/s Laser Diode Driver • Rise Times of Less Than 100ps • High Speed Operation (Up to 2.5 Gb/s NRZ Data) • Differential or Single-Ended Inputs • Single Supply • ECL-Compatible Clock and Data Inputs SONET/SDH 2.5Gb/s Laser Diode Driver • Direct Access to Modulation and Bia |
|
|
|
ETC |
Stapleford - 24-port Gigabit Ethernet Switch-on-a-Chip 502-01 IGBT IC DC | | 3 VLA502-01 IGBT IC VCC | | RG=1.1 4 VLA502-01 IGBT IC (1) VI VI (2) 0V VO tr tf 90% 50% 10% VO 0V -5V ttrip1,2 10V 0V ttimer 10V tPLH tPHL D1 C1 VD RG Dz2 Dz3 CM600DU-24NFH etc. VLA502-01 C2 CMOS etc. C |
|