Littelfuse 1.5 datasheet

No.	Part #	Manufacturer	Description
1	P2600ECMC	Littelfuse	SIDACtor Protection Thyristors and Beneﬁts t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t 40% lower capacitance than our Baseband Protectors, for applications that demand greater signal inte
2	Q6016NH6	Littelfuse	Triac Symbol IT(RMS) VDRM/ VRRM IGT (Q1) Value 15 & 16 400 to 1000 10 to 80 Schematic Symbol Unit A V mA MT2 Additional Information MT1 G Description The 15 Amp and 16 Amp bi-directional solid state switch series are designed for AC switching and pha
3	V07E250P	Littelfuse	Radial Lead Varistors • Lead –free, Halogen-Free and RoHS compliant • High peak surge ctour1r0eknAt ,rastiinnggle(IT8M)xup 20 pulse, (20mm) • Standard operating voltage range compatible with common AC line voltages (130 VAC to 625 VAC) • Characterized for maximum stan
4	SMBJ15CA	Littelfuse	TVS Diode • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1μA when VBR min>12V • For surface mounted applications to optimize board space • Low profile package • Typical failure mode is short from over-specified vol
5	V275LA4P	Littelfuse	Metal-Oxide Varistors • Lead –free, HalogenFree and RoHS compliant. • Energy absorption capability (WTM) up to 360J • Wide operating voltage range VM(AC)RMS 130V to 1000V • No derating up to 85ºC ambient • Available in tape and reel or bulk pack Absolute Maximum Ratings
6	1.5SMB22A	Littelfuse	TVS Diodes & Benefits ■ For surface mounted applications to optimize board space ■ Low profile package ■ Typical failure mode is short from over-specified voltage or current ■ VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature Coefficient, typical value i
7	S6065J	Littelfuse	Thyristors & Beneﬁts t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ to 1000 V t4 VSHFDBQBCJMJUZVQUP 950 A Agency Approval Agency ® Agency File Number J & K Packages: E71639 Main Features Symbol IT(RMS) VDRM/ VRRM IGT Val
8	SK015L	Littelfuse	Thyristors
9	SMA6L20A	Littelfuse	Transient Voltage Suppression Diodes
10	L6015	Littelfuse	Triac Symbol IT(RMS) VDRM/ VRRM IGT (Q1) Value 1 400 to 600 3 to 25 Schematic Symbol Unit A V mA MT2 MT1 G Description 1 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and
11	8.0SMDJ78CA	Littelfuse	TVS Diodes • For surface mounted applications to optimize board space • Low profile package • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ES
12	SMBJ58CA-HRA	Littelfuse	Transient Voltage Suppression Diodes • Excellent clamping capability • Low incremental surge resistance • Typical 11.10V IR ≤ 1µA for VR > • SMT for minimal board footprint • Low profile package • Typical failure mode is short from over-specified voltage or current •
13	P-T100-064	Littelfuse	SIDACtor Protection Thyristors and Beneﬁts t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Low capacitance Applicable Global Standards t TIA-968-B t GR-974 t ITU K.20/21 Enhanced Level t
14	CR2600SC	Littelfuse	The CR range of protectors are based on the proven technology of the T10 thyristor product effect the protected system. When a transient occurs, the voltage across the CRXXXX will increase until the breakdown voltage (Vbr) is reached. At this point the device will operate in a similar way to a T.V.S. device and is in an avalanche mode. Th
15	P4SMA160CA	Littelfuse	Transient Voltage Suppression Diodes ■ 400W peak pulse power ■ 260oC/40sec change to capability at 10/1000µs 260oC/30sec waveform, repetition rate (duty cycles):0.01% ■ VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature ■ Excellent clamping capability Coefficient, typical v
16	Q4015LT	Littelfuse	Thyristors Symbol IT(RMS) VDRM / VRRM DIAC VBO T Value 4 to 15 400 to 600 33 to 43 Unit A V V Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which
17	V14E30P	Littelfuse	Metal-Oxide Varistors • Breakthrough in low • High operating voltage varistor design temperature range provides high peak (up to up to 125ºC (phenolic 10KA) surge current rating coating option) • Reduced footprint and • 5 model sizes available: volume required for
18	15KPA120A-HR	Littelfuse	TVS Diodes • 15 kW peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass passivated chip junction in P600 package • Fast response time: typically less than 1.0ps from 0 Volts to VBR min • Excellent clamping capability • Typi
19	Q8015N5	Littelfuse	Triac Symbol IT(RMS) VDRM/ VRRM IGT (Q1) Value 15 & 16 400 to 1000 10 to 80 Schematic Symbol Unit A V mA MT2 Additional Information MT1 G Description The 15 Amp and 16 Amp bi-directional solid state switch series are designed for AC switching and pha
20	K1200y	Littelfuse	Thyristors • A C Circuit Oriented • T riggering Voltage of 79V to 330V • R oHS Compliant Electrical Specifications (TJ = 25°C, unless otherwise specified) Symbol Parameters VBO Breakover/Trigger Voltage VDRM Repetitive Peak Off-state Voltage Note: