No. | Part # | Manufacturer | Description | Datasheet |
---|---|---|---|---|
|
|
Microchip Technology |
12-Bit Digital-to-Analog Converter • 12-Bit Resolution • On-Board Nonvolatile Memory (EEPROM) • ±0.2 LSB DNL (typical) • External A0 Address Pin • Normal or Power-Down Mode • Fast Settling Time: 6 µs (typical) • External Voltage Reference (VDD) • Rail-to-Rail Output • Low Power Consu |
|
|
|
Microchip |
8/10/12-Bit Digital-to-Analog Converters • Memory Options: - Volatile Memory: MCP47CVDXX - Nonvolatile Memory: MCP47CMDXX • Operating Voltage Range: - 2.7V to 5.5V – full specifications - 1.8V to 2.7V – reduced device specifications • Output Voltage Resolutions: - 8-bit: MCP47CXD0X (256 ste |
|
|
|
Microchip |
(MCP79410 - MCP79412) Real-Time Clock/Calendar • Real-Time Clock/Calendar (RTCC): - Hours, minutes, seconds, day of week, day, month, year - Leap year compensated to 2399 - 12/24 hour modes • Oscillator for 32.768 kHz Crystals: - Optimized for 6-9 pF crystals • On-Chip Digital Trimming/Calibrati |
|
|
|
Microchip |
CAN I/O Expander • Implements CAN V2.0B - Programmable bit rate up to 1 Mb/s - One programmable mask - Two programmable filters - Three auto-transmit buffers - Two message reception buffers - Does not require synchronization or configuration messages • Hardware Featu |
|
|
|
Microchip Technology |
Stand-Alone CAN Controller • Implements CAN V2.0B at 1 Mb/s: - 0 to 8-byte length in the data field - Standard and extended data and remote frames • Receive Buffers, Masks and Filters: - Two receive buffers with prioritized message storage - Six 29-bit filters - Two 29-bit mas |
|
|
|
Microchip Technology |
Low-Power Linear Active Thermistor General Description • Tiny Analog Temperature Sensor • Available Packages: - SC70-5, SOT-23-3, TO-92-3 • Wide Temperature Measurement Range: - -40°C to +125°C (Extended Temperature) - -40°C to +150°C (High Temperature) (MCP9700, SOT-23-3 and SC70-5 |
|
|
|
Microchip |
10MHz Op Amps • Rail-to-Rail Input/Output • Wide Bandwidth: 10 MHz (typical) • Low Noise: 8.7 nV/Hz at 10 kHz (typical) • Low Offset Voltage: - Industrial Temperature: ±500 µV (max.) - Extended Temperature: ±250 µV (max.) • Mid-Supply VREF: MCP6021 and MCP6023 • |
|
|
|
Microchip |
8/10/12-Bit Digital-to-Analog Converters • Memory Options: - Volatile Memory: MCP47CVDXX - Nonvolatile Memory: MCP47CMDXX • Operating Voltage Range: - 2.7V to 5.5V – full specifications - 1.8V to 2.7V – reduced device specifications • Output Voltage Resolutions: - 8-bit: MCP47CXD0X (256 ste |
|
|
|
Microchip |
3A Dual MOSFET Driver • AEC-Q100 Qualified • High-Peak Output Current: 3A (typical) • Wide Input Supply Voltage Operating Range: - 4.5 to 18V • Low Shoot-Through/Cross-Conduction Current in Output Stage • High Capacitive Load Drive Capability: - 1800 pF in 12 ns (typical) |
|
|
|
Microchip Technology |
(MCP73811 / MCP73812) Fully Integrated Li-Ion / Li-Polymer Charge Management Controllers • Complete Linear Charge Management Controller - Integrated Pass Transistor - Integrated Current Sense - Integrated Reverse Discharge Protection • Constant Current / Constant Voltage Operation with Thermal Regulation • High Accuracy Preset Voltage Re |
|
|
|
Microchip Technology |
8/10/12-Bit Voltage Output Digital-to-Analog Converter • • • • • • • • • • • • MCP4901: 8-Bit Voltage Output DAC MCP4911: 10-Bit Voltage Output DAC MCP4921: 12-Bit Voltage Output DAC Rail-to-Rail Output SPI Interface with 20 MHz Clock Support Simultaneous Latching of the DAC Output with LDAC Pin Fast Set |
|
|
|
Microchip |
Digital-to-Analog Converters • Memory Options: - Volatile memory: MCP48CVDX1/2 - Nonvolatile memory: MCP48CMDX1/2 • Operating Voltage Range: - 2.7V to 5.5V – Full specifications - 1.8V to 2.7V – Reduced device specifications • Output Voltage Resolutions: - 8-bit: MCP48CXD0X (256 |
|
|
|
Microchip |
4.5A Dual MOSFET Driver • AEC-Q100 Qualified • High Peak Output Current: 4.5A (typical) • Wide Input Supply Voltage Operating Range: - 4.5V to 18V • Low Shoot-Through/Cross-Conduction Current in Output Stage • High Capacitive Load Drive Capability: - 2200 pF in 12 ns (typic |
|
|
|
Microchip |
4.0A Dual High-Speed Power MOSFET Drivers • Passes Automotive AEC-Q100 Reliability Testing • High Peak Output Current: 4.0A (typical) • Independent Enable Function for Each Driver Output • Low Shoot-Through/Cross-Conduction Current in Output Stage • Wide Input Supply Voltage Operating Range: |
|
|
|
Microchip Technology |
2.7V 4-Channel/8-Channel 10-Bit A/D Converters • 10-bit resolution • ± 1 LSB max DNL • ± 1 LSB max INL • 4 (MCP3004) or 8 (MCP3008) input channels • Analog inputs programmable as single-ended or pseudo-differential pairs • On-chip sample and hold • SPI serial interface (modes 0,0 and 1,1) • Singl |
|
|
|
Microchip Technology |
(MCP1650 - MCP1653) 750 kHz Boost Controller MCP1650/51/52/53 750 kHz Boost Controller Description The MCP1650/51/52/53 is a 750 kHz gated oscillator boost controller packaged in an 8 or 10-pin MSOP package. Developed for high-power, portable applications, the gated oscillator controller can d |
|
|
|
Microchip |
Low-Power Op Amp • Available in 5-Lead SC-70 and 5-Lead SOT-23 Packages • Gain Bandwidth Product: 1 MHz (typical) • Rail-to-Rail Input/Output • Supply Voltage: 1.8V to 6.0V • Supply Current: IQ = 100 µA (typical) • Phase Margin: 90° (typical) • Temperature Range: - I |
|
|
|
Microchip |
3A Dual MOSFET Driver • AEC-Q100 Qualified • High-Peak Output Current: 3A (typical) • Wide Input Supply Voltage Operating Range: - 4.5 to 18V • Low Shoot-Through/Cross-Conduction Current in Output Stage • High Capacitive Load Drive Capability: - 1800 pF in 12 ns (typical) |
|
|
|
Microchip |
10-MHz Precision Op Amps • Gain Bandwidth Product: 10 MHz (typical) • Slew Rate: 15 V/µs (typical at VDD = 5.5V) • THD: -115 dBc (typical) at 1 kHz and 2 VP-P • Input Offset Voltage: ±105 µV (maximum, VCM = 0.1V) • Rail-to-Rail: I/O • Power Supply: 2.2V to 5.5V - Single or D |
|
|
|
Microchip |
8-/10-/12-Bit Voltage Output Digital-to-Analog Converter • Output Voltage Resolutions: - 12-bit: MCP4726 - 10-bit: MCP4716 - 8-bit: MCP4706 • Rail-to-Rail Output • Fast Settling Time of 6 µs (typical) • DAC Voltage Reference Options: - VDD - VREF Pin • Output Gain Options: - Unity (1x) - 2x, only when VRE |
|