| Hit | Part # | Manufacturer | Description |
|---|---|---|---|
| 106 Hits | NAS1351 |
GAH |
(NAS1352) Socket Head Cap Screws if desired. After features (if any) then the Overall DataSheet4U.com Features for rotational security. Length is stated in 1/16ths of an inch. The last ( H ) for Drilled Head, or designation is for plating or finish. P= Cadmium II Plating Type 2, cla |
| 87 Hits | NAS1801 |
ETC |
Screw / Hex Head |
| 75 Hits | NAS1802 |
Genuine Aircraft |
Screw SSIVATED, STEEL 1/4 - 28 UNJF-3A SCREW, DRILLED HEAD, 1.000 LONG, CADMIUM PLATED, A286 MATERIAL EXAMPLE OF PART NUMBERS: NAS1801-4-16 NAS1801-04-12 NAS1802-4-16 NAS1802-4D16P 42 All Original Text, Tables and Drawings are Copyright © by Genuine Air |
| 59 Hits | MS24694 |
Genuine Aircraft |
Structural Screws screw length add 1/32 of an inch to overall length. 32 All Original Text, Tables and Drawings are Copyright © by Genuine Aircraft Hardware Co. 2005 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy. |
| 44 Hits | NAS1102 |
Coast Fabrication |
Screw 3C61-XX LSD3C62-XX LSD3C64-XX LSD3C65-XX LSD3C63-XX GaP λP (nm) Vf(v) @ 20mA Min Max 2.8 2.8 2.8 2.4 2.4 2.8 2.8 2.8 2.8 2.4 Iv(mcd) @ 10mA Min 1.5 2.2 2.5 3.5 2.5 1.5 2.2 2.5 3.5 2.5 PIN NO.1 8.0 (0.315") 11.0 (0.433") 2.0X4= 8.0 (0.315") em |
| 43 Hits | MS27039 |
Genuine Aircraft Hardware |
Pan Head / Structural Screws / Phillips Drive Text, Tables and Drawings are Copyright © by Genuine Aircraft Hardware Co. 2005 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy. Free Datasheet http://www.datasheet4u.com/ |
| 37 Hits | NAS517 |
Genuine Aircraft Hardware |
High Strength Countersunk Screws |
| 34 Hits | NAS623 |
ETC |
Screw |
| 24 Hits | NAS1096 |
NAS |
Screw - Hex Head |
| 19 Hits | NAS1581 |
Genuine Aircraft Hardware |
Countersunk Screw ludes the head and extends to the full cylindrical portion of the shank. The Grip Length for this series is measured in 1/16ths of an inch. + or - .010 IE: a grip of -4 = .240 to .260 or 1/4” or a grip of -12 = .740 to .760 or 3/4” The options are af |
| 18 Hits | NAS1801 |
Aircraft |
MACHINE SCREW 03-8P $0.20 NAS603-9P $0.21 NAS603-10P $0.21 NAS603-11P $0.19 NAS603-12P $0.23 NAS603-13P $0.17 NAS603-14P $0.28 NAS603-15P $0.16 NAS603-16P $0.21 NAS603-18P $0.23 NAS603-20P $0.39 NAS1202 / NAS1203 FLUSH HEAD SCREWS • Phillips 100° Flat Head • Tens |
| 15 Hits | MS35207 |
Aviaquip |
(MS35206 / MS35207) Non Structural Pan Head Screws 120 DIA 10-32 6-32 .1380 DIA 1/4-28 3/8 7/16 1/2 5/8 3/4 7/8 8-32 .1640 DIA 10-24 .190 DIA MATERIAL : STEEL CADMIUM PLATED CLASS 11 PART NUMBER EXAMPLE: AN515-10R8 = 3/16" DIA COURSE THREAD X 1/2" LONG AN520-416R12 = 1/4" DIA FINE THREAD X 5/8 |
| 12 Hits | 2CC-087-087 |
ETC |
Clamping Couplings / Recessed Screws 3-1/4 1-1/4 1-5/8 1-5/8 1-7/8 1-7/8 2-1/4 2-1/4 2-5/8 2-5/8 2-5/8 2-7/8 2-7/8 3 3 3 3-1/4 3-1/4 3-3/8 3-3/8 3-5/8 3-5/8 3-3/4 3-3/4 4-1/2 4-7/8 4-40 X 3/8 6-32 x 3/8 6-32 x 3/8 8-32 x 1/2 8-32 x 1/2 10-32 x 1/2 10-32 x 1/2 1/4-28 x 5/8 1/4-28 x 5/8 |
| 11 Hits | PE21101-3-3SD |
Military-Fasteners |
MACHINE SCREW |
| 11 Hits | NAS603 |
Aircraft |
MACHINE SCREW 03-8P $0.20 NAS603-9P $0.21 NAS603-10P $0.21 NAS603-11P $0.19 NAS603-12P $0.23 NAS603-13P $0.17 NAS603-14P $0.28 NAS603-15P $0.16 NAS603-16P $0.21 NAS603-18P $0.23 NAS603-20P $0.39 NAS1202 / NAS1203 FLUSH HEAD SCREWS • Phillips 100° Flat Head • Tens |
| 11 Hits | NAS601 |
Aircraft |
MACHINE SCREW 03-8P $0.20 NAS603-9P $0.21 NAS603-10P $0.21 NAS603-11P $0.19 NAS603-12P $0.23 NAS603-13P $0.17 NAS603-14P $0.28 NAS603-15P $0.16 NAS603-16P $0.21 NAS603-18P $0.23 NAS603-20P $0.39 NAS1202 / NAS1203 FLUSH HEAD SCREWS • Phillips 100° Flat Head • Tens |
| 10 Hits | MS35206 |
Aviaquip |
(MS35206 / MS35207) Non Structural Pan Head Screws 120 DIA 10-32 6-32 .1380 DIA 1/4-28 3/8 7/16 1/2 5/8 3/4 7/8 8-32 .1640 DIA 10-24 .190 DIA MATERIAL : STEEL CADMIUM PLATED CLASS 11 PART NUMBER EXAMPLE: AN515-10R8 = 3/16" DIA COURSE THREAD X 1/2" LONG AN520-416R12 = 1/4" DIA FINE THREAD X 5/8 |
| 10 Hits | MS51957 |
Military Standard |
Screw |
| 10 Hits | MS51958 |
Military Standard |
Screw C2-d c2-7 C2-6 C2-m C2A2 C3R5 thru cSR12 0-3 thru C3-12 C4m C4R4 Um c4m CAR7 C4m duo C4R12 C4R14 C4md C4Pa2 C4P22 C4R26 C5R4 t hru C5R26 C4-3 C4 4 C4-5 C4-d C4-7 C4-6 C4-10 adz a-24 (M-26 U-M U-20 C4=4 C4-26 C4-a C3-4 fhru C5-26 M&5 C6Rm C6R |
| 10 Hits | NAS1352C04-8 |
military fasteners |
screw Inches Nominal Flat Chamfer 0.176 Inches Minimum And 0.183 Inches Maximum 0.108 Inches Minimum And 0.112 Inches Maximum Hexagon 0.112 Inches 0.093 Inches Minimum And 0.095 Inches Maximum 40 80000 Pounds Per Square Inch 80.0 Rockwell B Minimum Overal |