BZW04-44

BZW04-40 : The BZW04 TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 400 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS0660 - Rev 4 - March 2023 For further information contact your local STMicroelectronics sales office. www.st.com BZW04-xx, BZW04-xxB Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter Value Uni.

BZW04-40 : BZW04P-5V8 THRU BZW04-376 TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage - 5.8 to 376 Volts DO204AL Peak Pulse Power - 400 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junction ♦ 400W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0 ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bi-directional types ♦ Typical ID less than 1µA above 10V rating ♦ High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) t.

BZW04-40 : BZW04 SERIES VBR : 6.8 - 440 Volts PPK : 400 Watts FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) * Typical IR less then 1µA above 10V TRANSIENT VOLTAGE SUPPRESSOR DO - 41 1.00 (25.4) MIN. 0.107 (2.74) 0.080 (2.03) 0.205 (5.20) 0.160 (4.10) MECHANICAL DATA * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.339 gram 0.034 (0.86) 0.028 (0.71) 1.00 (25.4) MIN. Dimensions in inches an.

BZW04-40 : BZW 04-5V8 ... BZW 04-376B Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden Peak pulse power dissipation Impuls-Verlustleistung Maximum stand-off voltage Maximale Sperrspannung Plastic case – Kunststoffgehäuse Weight approx. – Gewicht ca. Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Dimensions / Maße in mm 400 W 5.8...376 V DO-15 (DO-204AC) 0.4 g Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack see page 16 siehe Seite 16 For bidirectional types (suffix “B”), electrical characteristics apply in both directions. Für bidirektionale Dioden (S.

BZW04-40 : BZW04 Series DO-41 Features: • Plastic package. • Exceeds environmental standards of MIL-STD-19500. • 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. • Excellent clamping capability. • Low impedancesurge resistance. • Very fast response timeV. • Typical IR less than 1µA above 10V. • High temperature soldering guaranteed: 260°C/10 seconds/0.375 inch (9.5mm) lead length/5lbs. (2.3kg) tension. Dimensions : Inches (Millimetres) Mechanical Data Case : Molded plastic. Lead : Axial leads, solderable per MIL-STD-202, Method 208. Polarity : Color band denotes cathode except bipolar. Weight : 0.34 gram. Page 1 14/05/08 V1.1 BZW04 Series Maximum Ratings and Electrical Characte.

BZW04-40 : www.vishay.com BZW04-5V8 thru BZW04-376 Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate  (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VWM VBR (uni-directional) VBR (bi-directional) PPPM PD IFSM (uni-directional only) TJ max. Po.

BZW04-40 : BL GALAXY ELECTRICAL TRANSIENT VOLTAGE SUPPRESSOR FEATURES Plastic package has underwriters laboratory flam mability classification 94V-0 Glass passivated junction 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% Excellent clam ping capability Fast response tim e: typically less than 1.0ps from 0 Volts to V(BR) for uni-directional and 5.0ns for bi-directional types Devices with V(BR) 10V ID are typically ID less than 1.0 μA High temperature soldering guaranteed:265 / 10 seconds, 0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension MECHANICAL DATA Case:JEDEC DO--41, molded plastic body over passivated junction Term inals: axial leads, solderable per .

BZW04-40 : MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: sales@mdesemicondutor.com Web: www.mdesemiconductor.com BZW04 SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 376 Volts 400 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in DO-41 package • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Low incremental surge resistance • Excellent clamping capability • Fast response time: typically less than 1.0 ps from 0 volts to BV min • Typical IR less t.

BZW04-40 : Green compound Document Number: DS_D1406028 Version: H14 CREAT BY ART RATINGS AND CHARACTERISTICS CURVES (TA=25oC unless otherwise noted) FIG. 1 PEAK PULSE POWER RATING CURVE 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 10 TA = 25oC PPPM, PEAK PULSE POWER, W 1 0.1 0.0001 0.001 0.01 0.1 tp, PULSE WIDTH, (mS) 1 10 PEAK PULSE POWER(PPP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) BZW04 SERIES Taiwan Semiconductor 120 100 80 60 40 20 0 0 FIG.2 PULSE DERATING CURVE 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (oC) 175 PEAK PULSE CURRENT (%) 140 120 100 80 60 40 20 0 0 FIG. 3 CLAMPING POWER PULSE WAVEFORM tr=10μs PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CUR.

BZW04-40B : The BZW04 TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 400 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS0660 - Rev 4 - March 2023 For further information contact your local STMicroelectronics sales office. www.st.com BZW04-xx, BZW04-xxB Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter Value Uni.

BZW04-40B : BZW04 Series DO-41 Features: • Plastic package. • Exceeds environmental standards of MIL-STD-19500. • 400W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. • Excellent clamping capability. • Low impedancesurge resistance. • Very fast response timeV. • Typical IR less than 1µA above 10V. • High temperature soldering guaranteed: 260°C/10 seconds/0.375 inch (9.5mm) lead length/5lbs. (2.3kg) tension. Dimensions : Inches (Millimetres) Mechanical Data Case : Molded plastic. Lead : Axial leads, solderable per MIL-STD-202, Method 208. Polarity : Color band denotes cathode except bipolar. Weight : 0.34 gram. Page 1 14/05/08 V1.1 BZW04 Series Maximum Ratings and Electrical Characte.

BZW04-40B : www.vishay.com BZW04-5V8 thru BZW04-376 Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate  (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VWM VBR (uni-directional) VBR (bi-directional) PPPM PD IFSM (uni-directional only) TJ max. Po.

BZW04-40B : BL GALAXY ELECTRICAL TRANSIENT VOLTAGE SUPPRESSOR FEATURES Plastic package has underwriters laboratory flam mability classification 94V-0 Glass passivated junction 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% Excellent clam ping capability Fast response tim e: typically less than 1.0ps from 0 Volts to V(BR) for uni-directional and 5.0ns for bi-directional types Devices with V(BR) 10V ID are typically ID less than 1.0 μA High temperature soldering guaranteed:265 / 10 seconds, 0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension MECHANICAL DATA Case:JEDEC DO--41, molded plastic body over passivated junction Term inals: axial leads, solderable per .

BZW04-40B : MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414 1-800-831-4881 Email: sales@mdesemicondutor.com Web: www.mdesemiconductor.com BZW04 SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 376 Volts 400 Watt Peak Pulse Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in DO-41 package • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Low incremental surge resistance • Excellent clamping capability • Fast response time: typically less than 1.0 ps from 0 volts to BV min • Typical IR less t.

BZW04-40B : Green compound Document Number: DS_D1406028 Version: H14 CREAT BY ART RATINGS AND CHARACTERISTICS CURVES (TA=25oC unless otherwise noted) FIG. 1 PEAK PULSE POWER RATING CURVE 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 10 TA = 25oC PPPM, PEAK PULSE POWER, W 1 0.1 0.0001 0.001 0.01 0.1 tp, PULSE WIDTH, (mS) 1 10 PEAK PULSE POWER(PPP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) BZW04 SERIES Taiwan Semiconductor 120 100 80 60 40 20 0 0 FIG.2 PULSE DERATING CURVE 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (oC) 175 PEAK PULSE CURRENT (%) 140 120 100 80 60 40 20 0 0 FIG. 3 CLAMPING POWER PULSE WAVEFORM tr=10μs PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CUR.

BZW04-40B : BZW04P5V8B SERIES VBR : 6.8 - 440 Volts PPK : 400 Watts BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR DO - 41 FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) * Typical IR less then 1µA above 10V * Pb / RoHS Free MECHANICAL DATA * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Mounting position : Any * Weight : 0.339 gram DEVICES FOR UNIPOLAR APPLICATIONS For uni-directional without B suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient t.