ST7031

ST7032 : ST Sitronix ST7032 Dot Matrix LCD Controller/Driver n Features l 5 x 8 dot matrix possible l Low power operation support: -- 2.7 to 5.5V l Range of LCD driver power -- 3.0 to 7.0V l 4-bit, 8-bit, serial MPU or 400kbits/s fast I2C-bus interface are available l 80 x 8-bit display RAM (80 characters max.) l 10,240-bit character generator ROM for a total of 256 character fonts(max) l 64 x 8-bit character generator RAM(max) l 16-common x 80-segment and 1-common x 80-segment ICON liquid crystal display driver l 16 x 5 –bit ICON RAM(max) l Wide range of instruction functions: Display clear, cursor home, display on/off, cursor on/off, display character blink, cursor shift, display shift, double.

ST7033 : Crystalfontz Thiscontrollerdatasheetwasdownloadedfrom http://www.crystalfontz.com/controllers/ ST Sitronix ST7033 4 x 96 Dot Matrix LCD Controller/Driver 1. INTRODUCTION The ST7033 is a driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 96 segment and 4 common driver circuits. This chip is connected directly to a microprocessor, accepts 3-line serial peripheral interface (SPI), display data can stores in an on-chip display data RAM of 4 x 96 bits. It performs display data RAM read/write operation with no external operating clock to minimize power consumption. In addition, because it contains power supply circuits to drive liquid crystal, it is pos.

ST7035 : ST Sitronix ST7035 96 x 4 Dots Segment-type LCD Controller/Driver 1. INTRODUCTION ST7035 is a LCD driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 96 segment and 4 common driver circuits. ST7035 can be connected directly to a microprocessor with 3-Line serial peripheral interface (3-SPI) or I2C compatible interface. Display data written by MPU is stored in an on-chip Display Data RAM (DDRAM) of 96 x 4 bits. ST7035 performs Display Data RAM write-operation without external clock to minimize power consumption. In addition, the built-in LED backlight control circuit can setup an LED backlight system with minimal components if necessary. 2. FEATURE.

ST7036 : The ST7036 dot-matrix liquid crystal display controller and driver LSI displays alphanumeric, Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a 4-/ 2 8-bit, serial or fast I C interface microprocessor. Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip, a minimal system can be interfaced with this controller/driver. The ST7036 character generator ROM is extended to generate 256 5x8dot character fonts for a total of 256 different character fonts. The low power supply (2.7V to 5.5V) o.

ST7036i : The ST7036 dot-matrix liquid crystal display controller and driver LSI displays alphanumeric, Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a 4-/ 8-bit, serial or fast I2C interface microprocessor. Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip, a minimal system can be interfaced with this controller/driver. The ST7036 character generator ROM is extended to generate 256 5x8dot character fonts for a total of 256 different character fonts. The low power supply (2.7V to z Wide r.

ST7038 : ST7038 dot-matrix liquid crystal display controller can display alphanumeric, Japanese kana characters and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a microprocessor with 2 4/8-bit 6800-series or 8080-series, 3/4-line serial or fast I C interface. Since all the functions (such as display RAM, character generator ROM/RAM and liquid crystal driver) required for driving a dot-matrix liquid crystal display are internally embedded in this chip, a minimal system can be used with this controller/driver. The Character Generator ROM of ST7038 has 256 5x8dot cells and stores 256 different character fonts (5x8dot). ST7038 is suitable for low voltage.

ST7038i : ST7038 dot-matrix liquid crystal display controller can display alphanumeric, Japanese kana characters and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a microprocessor with 4/8-bit 6800-series or 8080-series, 3/4-line serial or fast I2C interface. Since all the functions (such as display RAM, character generator ROM/RAM and liquid crystal driver) required for driving a dot-matrix liquid crystal display are internally embedded in this chip, a minimal system can be used with this controller/driver. The Character Generator ROM of ST7038 has 256 5x8dot cells and stores 256 different character fonts (5x8dot). ST7038 is suitable for low voltage .

ST2-DC12V-F : 1a1b/2a 8A ST ST RELAYS FEATURES 1. Even with small form factor, sensitive enough for direct ICdriving The dimensions of this high-density 4-gap balanced armature are 31 mm  14 mm  11 mm 1.220 inch  .551 inch  .433 inch. Despite this small size, high sensitivity is achieved by a mechanism that incorporates highefficiency polarized magnetic circuits along with our exclusive spring alignment method. With an minimum operating power of about 150 mW, nominal operating power of 240 mW, this relay can be directly driven by transistor or chip controllers. 2. High switching capability Strong against lamp inductive loads, maximum switching capacity has reached 3,040 VA (8A 380V AC). 3. High bre.

ST2-DC9V-F : 1a1b/2a 8A ST ST RELAYS FEATURES 1. Even with small form factor, sensitive enough for direct ICdriving The dimensions of this high-density 4-gap balanced armature are 31 mm  14 mm  11 mm 1.220 inch  .551 inch  .433 inch. Despite this small size, high sensitivity is achieved by a mechanism that incorporates highefficiency polarized magnetic circuits along with our exclusive spring alignment method. With an minimum operating power of about 150 mW, nominal operating power of 240 mW, this relay can be directly driven by transistor or chip controllers. 2. High switching capability Strong against lamp inductive loads, maximum switching capacity has reached 3,040 VA (8A 380V AC). 3. High bre.

ST2-DC6V-F : 1a1b/2a 8A ST ST RELAYS FEATURES 1. Even with small form factor, sensitive enough for direct ICdriving The dimensions of this high-density 4-gap balanced armature are 31 mm  14 mm  11 mm 1.220 inch  .551 inch  .433 inch. Despite this small size, high sensitivity is achieved by a mechanism that incorporates highefficiency polarized magnetic circuits along with our exclusive spring alignment method. With an minimum operating power of about 150 mW, nominal operating power of 240 mW, this relay can be directly driven by transistor or chip controllers. 2. High switching capability Strong against lamp inductive loads, maximum switching capacity has reached 3,040 VA (8A 380V AC). 3. High bre.

ST2-DC5V-F : 1a1b/2a 8A ST ST RELAYS FEATURES 1. Even with small form factor, sensitive enough for direct ICdriving The dimensions of this high-density 4-gap balanced armature are 31 mm  14 mm  11 mm 1.220 inch  .551 inch  .433 inch. Despite this small size, high sensitivity is achieved by a mechanism that incorporates highefficiency polarized magnetic circuits along with our exclusive spring alignment method. With an minimum operating power of about 150 mW, nominal operating power of 240 mW, this relay can be directly driven by transistor or chip controllers. 2. High switching capability Strong against lamp inductive loads, maximum switching capacity has reached 3,040 VA (8A 380V AC). 3. High bre.

ST2-DC3V-F : 1a1b/2a 8A ST ST RELAYS FEATURES 1. Even with small form factor, sensitive enough for direct ICdriving The dimensions of this high-density 4-gap balanced armature are 31 mm  14 mm  11 mm 1.220 inch  .551 inch  .433 inch. Despite this small size, high sensitivity is achieved by a mechanism that incorporates highefficiency polarized magnetic circuits along with our exclusive spring alignment method. With an minimum operating power of about 150 mW, nominal operating power of 240 mW, this relay can be directly driven by transistor or chip controllers. 2. High switching capability Strong against lamp inductive loads, maximum switching capacity has reached 3,040 VA (8A 380V AC). 3. High bre.

ST1-DC48V-F : 1a1b/2a 8A ST ST RELAYS FEATURES 1. Even with small form factor, sensitive enough for direct ICdriving The dimensions of this high-density 4-gap balanced armature are 31 mm  14 mm  11 mm 1.220 inch  .551 inch  .433 inch. Despite this small size, high sensitivity is achieved by a mechanism that incorporates highefficiency polarized magnetic circuits along with our exclusive spring alignment method. With an minimum operating power of about 150 mW, nominal operating power of 240 mW, this relay can be directly driven by transistor or chip controllers. 2. High switching capability Strong against lamp inductive loads, maximum switching capacity has reached 3,040 VA (8A 380V AC). 3. High bre.

ST500A7.5 : .