| Part Number | MC33186 |
| Manufacturer | Freescale Semiconductor |
| Title | H-Bridge Driver |
| Description | Freescale Semiconductor Technical Data H-Bridge Driver The 33186 is a monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directi... |
| Features |
• Overtemperature, short-circuit protection, and overvoltage protection against transients up to 40 V at VBAT, typical • RDSON = 150 m for each output transistor at 25 C • Continuous DC load current 5.... |
| File Size | 511.88KB |
| Datasheet |
|
MC33181 : Order this document by MC34181/D MC34181,2,4 Low Power, High Slew Rate, Wide Bandwidth, JFET Input Operational Amplifiers Quality bipolar fabrication with innovative design concepts are employed for the MC33181/2/4, MC34181/2/4 series of monolithic operational amplifiers. This JFET input series of operational amplifiers operates at 210 µA per amplifier and offers 4.0 MHz of gain bandwidth product and 10 V/µs slew rate. Precision matching and an innovative trim technique of the single and dual versions provide low input offset voltages. With a JFET input stage, this series exhibits high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no de.
MC33181 : .
MC33181 : Order this document by MC34181/D MC34181,2,4 Low Power, High Slew Rate, Wide Bandwidth, JFET Input Operational Amplifiers Quality bipolar fabrication with innovative design concepts are employed for the MC33181/2/4, MC34181/2/4 series of monolithic operational amplifiers. This JFET input series of operational amplifiers operates at 210 µA per amplifier and offers 4.0 MHz of gain bandwidth product and 10 V/µs slew rate. Precision matching and an innovative trim technique of the single and dual versions provide low input offset voltages. With a JFET input stage, this series exhibits high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no de.
MC33182 : .
MC33182 : Order this document by MC34181/D MC34181,2,4 Low Power, High Slew Rate, Wide Bandwidth, JFET Input Operational Amplifiers Quality bipolar fabrication with innovative design concepts are employed for the MC33181/2/4, MC34181/2/4 series of monolithic operational amplifiers. This JFET input series of operational amplifiers operates at 210 µA per amplifier and offers 4.0 MHz of gain bandwidth product and 10 V/µs slew rate. Precision matching and an innovative trim technique of the single and dual versions provide low input offset voltages. With a JFET input stage, this series exhibits high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no de.
MC33184 : .
MC33184 : Order this document by MC34181/D MC34181,2,4 Low Power, High Slew Rate, Wide Bandwidth, JFET Input Operational Amplifiers Quality bipolar fabrication with innovative design concepts are employed for the MC33181/2/4, MC34181/2/4 series of monolithic operational amplifiers. This JFET input series of operational amplifiers operates at 210 µA per amplifier and offers 4.0 MHz of gain bandwidth product and 10 V/µs slew rate. Precision matching and an innovative trim technique of the single and dual versions provide low input offset voltages. With a JFET input stage, this series exhibits high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no de.
MC33186 : Pin 9, 10, 11, 12 Metal slug MC33186 Name GND Power Ground Description 1 2 GND Output Statusflag (SF) Inputs IN1,IN2 DI1,DI2, COD COD Analog ground Open drain output, active low. Is set according to the truth table . Voltage controlled inputs with hysteresis 3,13 18, 19 8 Freescale Semiconductor, Inc... When not connected or connected to GND, a stored failure will be reset by change of the voltage-level on DI1 or DI2. When connected to Vcc, the disable pin DI1 and DI2 are inactive. A stored failure will be reset by change of the voltage-level on IN1 or IN2 . H-Bridge outputs with integrated free-wheeling diodes. The pins 4 and 5 are internally connected. These pins supply the left h.
MC33187 : Pin 1 : RC Pin 4 : TOGGLE Oscillator frequency control. Rt and Ct control the On/Off Control. A positive going voltage transition on this frequency of the clock oscillator. The period of oscillation is input toggles the timer between the On and Off state. If the nominally given by t = RtCt with the overall time period given timer is On and timing, it may be turned off by a positive going by T = 4096 RtCt. However, the following formula is believed signal on the toggle pin before the time delay has elapsed. to give a more accurate forecast of the overall time interval provided by the circuit for values of Rt between 200K and 2M Pin 5 : VCC and values of Ct between 1nF and 1uF. Positive supply.