DatasheetsPDF.com

G525


Part Number G525
Manufacturer Global Mixed-mode Technology
Title USB High-Side Power Switch Advance Information
Description The G525 is an integrated high-side power switch optimized for self-powered and bus-powered Universal Serial Bus (USB) applica...
Features „ Compliant to USB standard „ Typical 130mΩ, Low MOSFET on resistance, at 5.0V „ 500mA minimum continuous load current „ 3.0V to 5.5V operating range „ 100µA typical on-state supply current „ 25µA typical standby supply current „ Output can be forced higher than input when operating in off state. „ ...

File Size 135.41KB
Datasheet G525 PDF File








Similar Ai Datasheet

G52 : Primary lithium battery G 52/3 3.0 V Primary lithium-sulfur dioxide (Li-SO2) High drain capability C-size spiral cell                 Benefits w High and stable discharge voltage w High pulse capability w Performance not affected by cell orientation w Long storage possible before use w Ability to withstand extreme temperature Key features w Low self-discharge rate (less than 2 % after 1 year of storage at + 20ºC) w Hermetic glass-to-metal sealing w Built-in safety vent (at the negative end of the cell) w Restricted for transport (class 9) w Meets shock, vibration and other environmental requirements of military specif.

G52-73131X2 : FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by .

G5201 : The G5201 provides complete control and protection for a DC-DC converter for high power applications. It is designed to drive two N-channel MOSFETs in a synchronous-rectified buck topology. The G5201 integrates all of the control, and protection functions into a single package. The G5201 provides simple, single feedback loop, voltage-mode control with fast transient response. It includes a 300kHz free-running triangle-wave oscillator. The error amplifier features a 15MHz gain-bandwidth product which provides high converter bandwidth for fast transient performance. The resulting PWM duty ratio ranges from 0% to 80%. The reference voltage is 0.8V, 2% accuracy. The G5201 has internal soft start.

G5207 : The G5207 provides complete control and protection for a DC-DC converter for high power applications. It is designed to drive two N-channel MOSFETs in a synchronous-rectified buck topology. The G5207 integrates all of the control, and protection functions into a single package. The G5207 provides simple, single feedback loop, voltage-mode control with fast transient response. It includes a 300KHz free-running triangle-wave oscillator. The error amplifier features a 15MHz gain-bandwidth pro.

G5212 : The G5212 is a wide input range and fixed-frequency PWM controller with integrated MOSFET drivers for single power rail synchronous single-phase buck converter. G5212 utilizes voltage-mode control .

G5217 : The G5217 provides complete control and protection for a DC-DC converter for high power applications. It is designed to drive two N-channel MOSFETs in a synchronous-rectified buck topology. The G5217 integrates all of the control, bootstrap diode and protection functions into a single package. The G5217 provid.

G5237F : The G5237F is a high performance AC/DC power supply controller which uses digital control technology to build peak current mode PWM flyback power supplies. The device operates in quasi-resonant mode to provide high efficiency along with a number of key built-in protection features while minimizing the external component count, simplifying EMI design and lowering the total bill of material cost. The G5237F removes the need for secondary feedback circuit while achieving excellent line and load regulation. It also eliminates the need for loop compensation components while maintaining stability over all operating conditions. Pulse-by-pulse waveform analysis allows for a loop response that is muc.

G5238F : The G5238F is a high performance AC/DC power supply controller which uses digital control technology to build peak current mode PWM flyback power supplies. The device operates in quasi-resonant mode to provide high efficiency along with a number of key built-in protection features while minimizing the external component count, simplifying EMI design and lowering the total bill of material cost. The G5238F removes the need for secondary feedback circuit while achieving excellent line and load regulation. It also eliminates the need for loop compensation components while maintaining stability over all operating conditions. Pulse-by-pulse waveform analysis allows for a loop response that is muc.

G5240 : The G5240 is an integrated 120mΩ power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Several Protection features include current limiting with foldback, and thermal shutdown to prevent ca.

G5241 : The G5241 is an integrated 120mΩ power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Several Protection features include current limiting with foldback, and thermal shutdown to prevent catastrophic switch failure caused by increasing power dissipation when continuous heavy loads or short circuit occurs. And a buil.

G5243A : The G5243A is an integrated 120mΩ power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Several Protection features include current limiting with foldback, and thermal shutdown to prevent catastrophic switch failure caused by increasing power dissipation when continuous heavy loads or short circuit occ.

G5244 : The G5244 is an 120mΩ power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. Several Protection features such as current limiting with foldback, and thermal shutdown are included to prevent catastrophic switch failure caused by increasing power dissipation when continuous heavy loads or short circuit occurs. A built-in charge pump.

G524A : The G524 is an integrated power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. G524A, G524B, G524C, G524D are 70mΩ RDS(ON)..

G524B : The G524 is an integrated power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. G524A, G524B, G524C, G524D are 70mΩ RDS(ON)..

G524C : The G524 is an integrated power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. G524A, G524B, G524C, G524D are 70mΩ RDS(ON)..

G524D : The G524 is an integrated power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. G524A, G524B, G524C, G524D are 70mΩ RDS(ON)..




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)