1SMA5919B

1SMA5919 : 1SMA5914~1SMA5949 SURFACE MOUNT SILICON ZENER DIODE VOLTAGE FEATURES • For surface mounted applications in order to optimize board space. • Built-in strain relief • Glass passivated junction • Low inductance • Typical IR less than 1.0µA above 12V • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals .096(2.44) .062(1.60) .047(1.20) .114(2.90) .098(2.50) 3.6 to 100 Volts POWER 1.5 Watts SMA/DO-214AC Unit: inch (mm) • Low profile package .181(4.60) .157(4.00) environment substance directive request MECHANICALDATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder pl.

1SMA5919 : Power Dissipation @ Ta=50ºC Derate Above 50ºC Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load Operating Junction and Storage Temperature Range SYMBOL *PD **IFSM Tj, Tstg VALUE 1.5 15 10 - 55 to +150 UNIT W mW/ºC A °C * Mounted on 5.0mm2 ( 0.013mm thick) land ares ** Measured on 8.3ms, and single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum ELECTRICAL CHARACTERISTICS (Ta=25°C unless specified otherwise) VF @ 200mA 1.2V Zener Voltage Zener Impedance Reverse Leakage Device # Nom. V VZ @ IZT (V) min max ZZT @ IZT (Ω) (mA) max ZZK @ (Ω) max IZK (mA) IR @ (µA) max VR (V) 1SMA5917 4.7 4.46 4.94 5.0 79.8 500 1..

1SMA5919A : www.eicsemi.com PD, MAXIMUM DISSIPATION, (W) 5.65 5.35 4. 6 4. 2 1SMA5913A - 1SMA5956A VZ : 3.3 - 200 Volts PD : 1.5 Watts FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free MECHANICAL DATA : * Case : SMA Molded plastic * Epoxy : UL94V-0 rate flame retardant * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.060 gram (Approximately) MAXIMUM RATINGS Rating at 25°C ambient temperature unless otherwise specified Rating DC Power Dissipation @ TL = 75 °C Measured zero lead length(1" square copper pad, FR-4 board) Derate above 75 °C Thermal Resistance Junction to Lea.

1SMA5919A : 1SMA5913A-1SMA5957A SURFACE MOUNT SILICON ZENER DIODES VOLTAGE RANGE: 3.3 - 240V POWER: 1.5Wa t t s Features D Complete Voltage Range 3.3 to 240 Volts D High peak reverse power dissipation D High reliability D Low leakage current Mechanical Data ! Case: SMA/DO-214AC, Molded Plastic ! Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 ! Polarity: Cathode Band or Cathode Notch ! Marking: Type Number ! Weight: 0.064 grams (approx.) B A J H G E SMA(DO-214AC) Dim Min Max C A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0.31 E 4.80 5.59 G 0.10 0.20 H 0.76 1.52 J 2.01 2.62 All Dimensions in mm Maximum Ratings @ TA = 25°C unless otherwise specified Rating DC Power Dissipation (No.

1SMA5919B : ® WON-TOP ELECTRONICS Features  Glass Passivated Die Construction  1.5W Power Dissipation  3.3V – 200V Nominal Zener Voltage  5% Standard Vz Tolerance  Low Inductance  For Use in Voltage Regulator or Reference  Plastic Case Material has UL Flammability Classification Rating 94V-0 1SMA5913B – 1SMA5956B 1.5W SURFACE MOUNT ZENER DIODE Pb A C B F H G E D Mechanical Data  Case: SMA/DO-214AC, Molded Plastic  Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026  Polarity: Cathode Band  Marking: Device Code  Weight: 0.064 grams (approx.)  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 5 SMA/DO-214AC Dim Min Max A 2.29 2.92 B 4..

1SMA5919B : 1SMA5913B THRU 1SMA5957B 1.5W SURFACE MOUNT SILICON ZENER DIODE FEATURES : * Complete Voltage Range 3.3 to 240 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free MECHANICAL DATA : * Case : SMA Molded plastic * Epoxy : UL94V-O rate flame retardant * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.060 gram (Approximately) MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified Rating DC Power Dissipation @ TL = 75 °C Measured zero lead length(1" square copper pad, FR-4 board) Derate above 75 °C Thermal Resistance Junction to Lead DC Power Dissipation @ Ta = 25 °C (FR-4 board) Derate abov.

1SMA5919B : Features * Low Zener Impedance * Low Regulation Factor * VZ – tolerance: ±5% * For Surface Mount Applications * Epoxy meets UL 94 V-0 flammability rating * Moisture Sensitivity Level 1 Mechanical Data * Case: DO-214AC Molded plastic * Terminals: Solder plated * Polarity: Indicated by cathode band * Standard packaging: 12mm tape(ELA STD RS-481) 1SMA5913B THRU 1SMA5956B 1.5 Watt Zener Diode 3.3 to 200 Volts G AC B D E F Cathode Band H SMA INCHES MM DIM MIN MAX MIN MAX A 0.078 0.090 1.98 2.29 B 0.052 0.058 1.32 1.47 C --- 0.008 --- 0.20 D 0.030 0.052 0.76 1.32 E 0.193 0.208 4.90 5.28 F 0.157 0.177 3.99 4.50 G 0.006 0.012 0.152 0.305 H 0.100 0.110 .

1SMA5919B : SMD Type Surface Mount Zener Diodes 1SMA59-B Series Diodes Features Flat Handling Surface for Accurate Placement Standard Zener Breakdown Voltage Range -3.3V to 68V Low Profile Package Absolute Maximum Ratings (Ta = 25 ) Parameter Power dissipation @ TL = 75 R P R JA Symbol P JL Rating 1500 50 500 250 150 -65 to +150 Unit mW /W mW /W Thermal Resistance, Junction to Lead Power dissipation @ TA = 25 Thermal Resistance, Junction to Ambient Jumction temperature Storage temperature Tj Tstg Electrical Characteristics (Ta = 25 ) Zener voltage VZ (V) Type Min. 1SMA5913B 1SMA5914B 1SMA5915B 1SMA5916B 1SMA5917B 1SMA5918B 1SMA5919B 1SMA5920B 1SMA5921B 1SMA5922B 3.13 3.42 3.70 4.08 4.46 4.84 5.

1SMA5919B : TH97/2478 TH09/2479 IATF 0113686 SGS TH07/1033 1SMA5913B - 1SMA5956B VZ : 3.3 - 200 Volts PD : 1.5 Watts SURFACE MOUNT SILICON ZENER DIODES SMA FEATURES : * Complete Voltage Range 3.3 to 200 Volts * High peak reverse power dissipation * High reliability * Low leakage current * Pb / RoHS Free MECHANICAL DATA : * Case : SMA Molded plastic * Epoxy : UL94V-O rate flame retardant * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.060 gram (Approximately) 1.3 ± 0.2 5.5 ± 0.15 4.4 ± 0.25 2.7 ± 0.2 2.3 ±0.2 2.0 ± 0.2 Dimensions in millimeters MAXIMUM RATINGS Rating at 25C ambient temperature unless otherwise specified Rating DC Power Dissipation @ TL = 75.

1SMA5919B : 1SMA5913B THRU 1SMA5956B Surface Mount Silicon Zener Diodes Features • High peak reverse power dissipation • Low leakage current Mechanical Data • Case: SMA (DO-214AC) molded plastic • Epoxy: UL 94V-0 rate flame retardant • Polarity: Color band denotes Cathode end • Mounting position: Any Absolute Maximum Ratings and Characteristics (Ta = 25℃) HParameter Symbol DC Power Dissipation at TL = 75℃ Mearsured at Zero Lead Length (1"square copper pad, FR-4 board) Ptot CDerate Above 75℃ Thermal Resistance from Junction to Lead RθJL EDC Power Dissipation at Ta = 25℃ (FR-4 board )Derate Above 25℃ TThermal Resistance from Junction to Ambient Ptot RθJA Maximum Forward Voltage at IF = 200 .

1SMA5919B : SURFACE ZENER DIODE RoHS 1SMA5913B Thru 1SMA5957B 1.5watts FEATURES • Voltage Range 3.3 to 240 Volts • High peak reverse power dissipation • High reliability • Low leakage current MECHANICAL DATA • Molded plastic body (UL 94 V-0 Rated) • Polarity: Color Band denotes Cathode end • Weight: 0.060 grams 1.3 ± 0.2 5.3 ± 0.35 4.2 ± 0.25 1.6 ± 0.25 2.6 ± 0.15 2.3 ± 0.2 SMA Dimensions in millimeters MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified . Single phase, half wave,60Hz, resistive or inductive load. For capactitive load, derate current by 20% Parameter DC Power Dissipation @ TL = 75°C Measured zero lead length (1" square cop.

1SMA5919BT3 : 1SMA5913BT3 Series 1.5 Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of 1.5 Watt Zener Diodes offers the following advantages. Features http://onsemi.com • • • • • • • Standard Zener Breakdown Voltage Range − 3.3 V to 68 V ESD Rating of Class 3 (16 kV) per Human Body Model Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package Ideal Replacement for MELF Packages Pb−Free Packages are Available CATHODE ANODE Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant with readily SMA CASE 403D PLASTIC solderable leads MAXIMU.

1SMA5919BT3G : DATA SHEET www.onsemi.com 1.5 Watt Plastic Surface Mount Zener Voltage Regulators 1SMA59xxBT3G Series, SZ1SMA59xxBT3G Series This complete new line of 1.5 Watt Zener Diodes offers the following advantages. Features • Standard Zener Breakdown Voltage Range − 3.3 V to 68 V • ESD Rating of Class 3 ( 16 kV) per Human Body Model • Flat Handling Surface for Accurate Placement • Package Design for Top Slide or Bottom Circuit Board Mounting • Low Profile Package • Ideal Replacement for MELF Packages • AEC−Q101 Qualified and PPAP Capable − SZ1SMA59xxBT3G • SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements • These are Pb−Free Devices* Mechanical C.