1N65

1N60 : MCC
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • High Reliability • Low Reverse Current and Low Forward Voltage 1N60 1N60P Schottky Barrier Rectifier Maximum Ratings • Storage Temperature: -65℃ to +125℃ Electrical Characteristics @ 25°C Unless Otherwise Specified Parameter Symbol Type Value Test Condition Repetitive 1N60 40V Peak Reverse Voltage VRRM 1N60P 45V Average Forward Current IF(AV) 1N60 1N60P 30mA 50mA Ta = 25℃ Ta = 25℃ Peak Forward Surge Current IFSM 1N60 150mA tp≦1s 1N60P 500mA tp≦1s Junction Ambient RthJA On PC board 250K/W 50mm×50mm ×1.6mm DO-35 D A Cathode Mark B D C DIMEN.

1N60 : 1N60 THRU 1N60P SMALL SIGNAL SCHOTTKY DIODE Reverse Voltage - 40 to 45 Volts Forward Current - 0.03 / 0.05 Ampere FEATURES ● Metal-on-silicon junction, majority carrier conduction ● High current capability, Low forward voltage drop ● Extremely low reverse current Ir ● Ultra speed switching characteristics ● Small temperature coefficient of forward characteristics ● Satisfactory Wave detection efficiency ● For use in RECORDER TV RADIO TELEPHONE as detectors, super high speed switching c rcuits, small current rectifier MECHANICAL DATA Case: DO-35 glass case Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.13 grams Φ 1.8 ± 0.2 Φ 0.5 ± 0.1 DO-35 All Dimensions in .

1N60 : 1N60, 1N60P Features · Metal silicon junction, majority carrier conduction · High current capability, Low forward voltage drop · Extremely low reverse current lR · Ultra speed switching characteristics · Small temperature coefficient of forward characteristics · Satisfactory Wave detection efficiency · For use in RECORDER, TV, RADIO, TELEPHONE as detectors, super high speed switching circuits, small current rectifier Mechanical Data · Case : DO-35 glass case · Polarity : Color band denotes cathode end · Weight : Approx. 0.13 gram Absolute Ratings (Limiting Values) Symbols VRRM lF lFSM TSTG/TJ TL Parameters Zenerepetitive Peak Reverse Voltage Forward Continuous Crrent TA=25 Peak Forwa.

1N60 : Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Current IFSM Peak Forward Surge Current VF Maximum Instantaneous Forward Voltage IF Minimum Forward Current VR Maximum Reverse Leakage 1N60 50 - - - 1.0 20 1N60P 45 20 50 150 500 4 - Unit Conditions V V mA mA 8.3ms single half sine-wave mA superimposed on rated load (JEDEC Method) V IF=5mA mA VF=1V V IR=40µA TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8.

1N60 : The UTC 1N60 is a high voltage MOSFET and is designed to have better characteristics, such as fast switching time, low gate charge, low on-state resistance and have a high rugged avalanche characteristics. This power MOSFET is usually used at high speed switching applications in power supplies, PWM motor controls, high efficient DC to DC converters and bridge circuits. 1 Power MOSFET TO- 251 1 TO-252 1 TO-220 FEATURES * RDS(ON) =9.3Ω@VGS = 10V. * Ultra Low gate charge (typical 5.0nC) * Low reverse transfer capacitance (CRSS = typical 3.0 pF) * Fast switching capability * Avalanche energy specified * Improved dv/dt capability, high ruggedness 1 TO-220F *Pb-free plating product numbe.

1N60-KW : The UTC 1N60-KW is a high voltage MOSFET and is designed to have better characteristics, such as fast switching time, low gate charge, low on-state resistance and have a high rugged avalanche characteristics. This power MOSFET is usually used at high speed switching applications in power supplies, PWM motor controls, high efficient DC to DC converters and bridge circuits.  FEATURES * RDS(ON) 15Ω @ VGS=10V, ID=0.5A * Fast switching capability * Avalanche energy specified * Improved dv/dt capability, high ruggedness  SYMBOL Power MOSFET  ORDERING INFORMATION Ordering Number Lead Free Halogen Free - 1N60G-AA3-R - 1N60G-AB3-R 1N60L-TM3-T 1N60G-TM3-T 1N60L-TN3-R 1N60G-TN3-R 1N60L.

1N6000 : The popular 1N5985 thru 1N6031 series of 0.5 watt Zener Voltage Regulators provides a selection from 2.4 to 200 volts in standard 5% or 10% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-35 Zeners are also available in various military screening levels by adding a prefix identifier as described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPEARANCE DO-35 (DO-204AH) FEATURES • JEDEC registered 1N5985 to 1N6031 • Similar to operating current con.

1N6000 : MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • Popular DO-35 Package---Small and Rugged • Double Slug Construction • Constructed with an Oxide Passivated All Diffused Die Maximum Ratings • Operating Temperature: -55°C to +150°C • Storage Temperature: -55°C to +150°C • DC Power Dissipation: 500mW • Derate above 50°C: 3.33mW/°C • Forward voltage @ 100mA: 1.5V Figure 1 Capacitance vs. Vz Curve 1N5988 THRU 1N6016 500 mW Zener Diode 3.3 to 47 Volts DO-35 D Typical Capacitance In Picofarads At zero volts 10 At-2volts(VR) 1 0 100 200 Zener Voltage Vz Figure 2 - Derating Curve.

1N6000 : 1N5985-1N6031 High-reliability discrete products and engineering services since 1977 500mW ZENER DIODES FEATURES  Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Operating and Storage Temperature DC Power Dissipation @ 25°C Lead Length 3/8” Derate above 50°C Forward Voltage @ 200mA -65 to +175°C 500 mW 3.33 mW/°C 1.1 V ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part Number Nominal Zener Voltage VZ @ IZT (note 2) Volts Zener Test Current IZT mA Maximum Zener Impedance (note 1) ZZT @ IZT Ohm.

1N6000A : 1N5985A - 1N6031A VZ : 2.4 - 200 V PD : 500 mW FEATURES : * Extensive selection from 2.0 V to 200 V * Standard zener voltage tolerance is ± 10%. * Other tolerances are available upon request. * Pb / RoHS Free MECHANICAL DATA : * Case: DO-35 Glass Case * Weight: approx. 0.13g Certificate TH97/10561QM Certificate TW00/17276EM ZENER DIODES DO - 35 Glass (DO-204AH) 0.079(2.0 )max. Cathode Mark 0.020 (0.52)max. 1.00 (25.4) min. 0.150 (3.8) max. 1.00 (25.4) min. Dimensions in inches and ( millimeters ) Maximum Ratings and Thermal Characteristics Rating at 25 °C ambient temperature unless otherwise specified. Rating Power Dissipation Maximum Forward Voltage at IF = 200 mA. Thermal Resistanc.

1N6000A : 1N5985A - 1N6031A VZ : 2.4 - 200 V PD : 500 mW FEATURES : * Extensive selection from 2.0 V to 200 V * Standard zener voltage tolerance is ± 10%. * Other tolerances are available upon request. * Pb / RoHS Free MECHANICAL DATA : * Case: DO-35 Glass Case * Weight: approx. 0.13g ZENER DIODES DO - 35 Glass (DO-204AH) 0.079(2.0 )max. Cathode Mark 0.020 (0.52)max. 1.00 (25.4) min. 0.150 (3.8) max. 1.00 (25.4) min. Dimensions in inches and ( millimeters ) Maximum Ratings and Thermal Characteristics Rating at 25 °C ambient temperature unless otherwise specified. Rating Power Dissipation Maximum Forward Voltage at IF = 200 mA. Thermal Resistance Junction to Ambient (Note 1) Thermal Resistance Ju.

1N6000A : ® MOTOROLA IN5985A thru IN6025A 500 MILLIWATT HERMETICALLY SEALED GLASS SILICON ZENER DIODES · .. A complete line of 500 mW Zener Diodes offering the following advantages: • Complete Voltage Range - 2.4 to 110 Volts • DO-35 Package - Smaller than Conventional DO-7 Package • Double Slug Type Construction • Metallurgically Bonded Construction • JEDEC Registered • Oxide Passivated Die *MAXIMUM RATINGS Rating DC Power Dissipation @TL"5o"C. Lead Length = 3/8" Derate above 5o"C Operating and Storage Junction Temperature Range *Indicates JEDEC Registered Data. MECHANICAL CHARACTERISTICS Svmbol PD TJ,Tstg Value 500 3.33 -55 to +200 Unit mW mW/oC °c CASE: Double slug type, hermetically sealed .

1N6000B : The CENTRAL SEMICONDUCTOR 1N5985B series are high quality silicon Zener diodes designed for low leakage applications. DO-35 CASE MAXIMUM RATINGS: (TL=50°C) Power Dissipation Operating and Storage Junction Temperature SYMBOL PD TJ, Tstg 500 -65 to +200 UNITS mW °C ELECTRICAL CHARACTERISTICS: (TL=30°C) VF=1.5V MAX @ IF=100mA (for all types) TYPE ZENER VOLTAGE VZ @ IZT TEST CURRENT MAXIMUM ZENER IMPEDANCE MAXIMUM REVERSE CURRENT MIN NOM MAX VVV IZT ZZT @ IZT ZZK @ IZK mA Ω Ω mA IR @ VR μA V 1N5985B 2.280 2.4 2.520 5.0 100 1.8K 0.25 100 1.0 1N5986B 2.565 2.7 2.835 5.0 100 1.9K 0.25 75 1.0 1N5987B 2.850 3.0 3.150 5.0 95 2.0K 0.25 50 1.0 1N5988B 3.135 3..

1N6000B : NOT RECOMMENDED FOR NEW DESIGNS MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) x High Reliability x Very Sharp Reverse Characteristic x VZ – tolerance ± 5% • Moisture Sensitivity: Level 1 x Marking: Cathode band and type number Maximum Ratings x Operating Temperature: -65oC to +200oC x Storage Temperature: -65oC to +200oC x DC Power Dissipation: 500mW x Maximum Thermal Resistance: 300K/W Junction to Ambient Test Conditions: I = 9.5mm(3/8”) TL = constant x Forward volta.

1N6000B : 1N5985B - 1N6025B — Zener Diodes 1N5985B - 1N6025B Zener Diodes Tolerance = 5% March 2010 DO-35 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings * TA=25°C unless otherwise noted Symbol Parameter Value Power Dissipation PD @ TL ≤ 75°C, Lead Length = 3/8” Derate above 75°C 500 4.0 TJ, TSTG Operating and Storage Temperature Range -65 to +200 * These ratings are limiting values above which the serviceability of the diode may be impaired. Units mW mW/°C °C Electrical Characteristics TA=25°C unless otherwise noted Device VZ (V) @ IZ (Note 1) Min. Typ. Max. Zener Impedance Test Current IZ (mA) ZZ @ IZ ZZK @ IZK = 250μA (Ω) (Ω) 1N5985B 2.58 2.4 2.52 1N5986B 2.565 .

1N6000BUR-1 : The popular 1N5985BUR-1 thru 1N6031BUR-1 series of 0.5 watt Zener voltage regulators provides a selection from 2.4 to 200 volts in 10%, 5%, 2% and 1% tolerances. These glass surface mount DO-213AA Zeners are also available in various military equivalent screening levels by adding a prefix identifier as described in the “part nomenclature” section. Microsemi also offers numerous other Zener products to meet higher and lower power applications. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • Surface mount equivalents to JEDEC registered 1N5985 to 1N6031 series. • Similar to operating current conditions of the BZX55 Pro Electron series of Zener pro.

1N6001 : The popular 1N5985 thru 1N6031 series of 0.5 watt Zener Voltage Regulators provides a selection from 2.4 to 200 volts in standard 5% or 10% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-35 Zeners are also available in various military screening levels by adding a prefix identifier as described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPEARANCE DO-35 (DO-204AH) FEATURES • JEDEC registered 1N5985 to 1N6031 • Similar to operating current con.