BTA08-600

BTA08-600 : Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company BTA08/BTB08 Triac Series Absolute maximum ratings Parameter peak repetitive off-stage voltage on-state RMS current NON repetitive surge peak on-state current critical rate of rise on-state current peak gate current average gate power dissipation storage temperature range operating junction temperature range Symbol VDRM, VRRM IT(RMS) ITSM dI/dt (Q1-3) IGM PG(AV) Tstg Tj Electrical characteristics ( Tj=25ºC) unless otherwise specified Parameter Symbol gate trigger current IGT gate trigger voltage hold current critical rate of rise off-state voltage on-state voltage off-state leakage current ther.

BTA08-600A : isc Triacs BTA08-600A FEATURES ·With TO-220AB insulated package ·Suitables for general purpose AC switching. Which can be used as an ON/OFF function in applications such as static relays, heating regulation,induction motor starting circuits. Or for phase control operation in light dimmers, motor speed controllers etc. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER VDRM Repetitive peak off-state voltage VRRM Repetitive peak off-state voltage IT(RMS) RMS on-state current (full sine wave)Tc=75℃ ITSM Non-repetitive peak on-state current tp=10ms Tj Operating junction temperature Tstg Storage tempera.

BTA08-600B : Available either in through-hole and surfacemount packages, these devices are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits or for phase control operation in light dimmers and motor speed controllers, etc. The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performance. Logic level versions are designed to interface directly with low power drivers such as Microcontrollers. By using an internal ceramic pad, the BTA series provide voltage insulated tab (rated at 2500 VRMS) in.

BTA08-600B : isc Triacs BTA08-600B FEATURES ·With TO-220AB insulated package ·Suitables for general purpose applications where gate high sensitivity is required. Application on 4Q such as phase control and static switching. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER MIN UNIT VDRM Repetitive peak off-state voltage 600 V VRRM Repetitive peak reverse voltage 600 V IT(RMS) RMS on-state current (full sine wave)Tj=105℃ 8 A ITSM Non-repetitive peak on-state current tp=20ms 80 A Tj Operating junction temperature 110 ℃ Tstg Storage temperature -45~150 ℃ Rth(j-c) Thermal resistance, junction to case.

BTA08-600BW : Available either in through-hole and surfacemount packages, these devices are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits or for phase control operation in light dimmers and motor speed controllers, etc. The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performance. Logic level versions are designed to interface directly with low power drivers such as Microcontrollers. By using an internal ceramic pad, the BTA series provide voltage insulated tab (rated at 2500 VRMS) in.

BTA08-600BW : isc Triacs BTA08-600BW FEATURES ·With TO-220AB insulated package ·Suitables for general purpose applications where gate high sensitivity is required. Application on 4Q such as phase control and static switching. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER MIN UNIT VDRM Repetitive peak off-state voltage 600 V VRRM Repetitive peak reverse voltage 600 V IT(RMS) RMS on-state current (full sine wave)Tj=105℃ 8 A ITSM Non-repetitive peak on-state current tp=20ms 80 A Tj Operating junction temperature 110 ℃ Tstg Storage temperature -45~150 ℃ Rth(j-c) Thermal resistance, junction to cas.

BTA08-600BW3G : BTA08-600BW3G, BTA08-800BW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features http://onsemi.com • • • • • • • • • Blocking Voltage to 800 V On-State Current Rating of 8 A RMS at 80°C Uniform Gate Trigger Currents in Three Quadrants High Immunity to dV/dt − 2000 V/ms minimum at 125°C Minimizes Snubber Networks for Protection Industry Standard TO-220AB Package High Commutating dI/dt − 1.5 A/ms minimum at 125°C Internally Isolated (2500 VRMS) These Devices are Pb−Free and are RoHS Compliant* Rating Symbol VDRM, VRRM 600 800 IT(RMS) ITSM 8.0 90 A A x A Y WW G Value.

BTA08-600C : Available either in through-hole and surfacemount packages, these devices are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits or for phase control operation in light dimmers and motor speed controllers, etc. The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performance. Logic level versions are designed to interface directly with low power drivers such as Microcontrollers. By using an internal ceramic pad, the BTA series provide voltage insulated tab (rated at 2500 VRMS) in.

BTA08-600C : Glass passivated triacs in a plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting,heating and static switching. Symbol T2 T1 Simplified outline Pin 1 2 3 TAB G 1 2 3 TO-220 Description Main terminal 1 (T1) Main terminal 2 (T2) gate (G) Main terminal SYMBOL VDRM IT RMS ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current full sine wave Non-repetitive peak on-state current (full cycle,Tj initial=25 ) Applications: Motor control Industrial and domestic lighting Heating Static switching Fea.

BTA08-600C : isc Triacs BTA08-600C FEATURES ·With TO-220AB insulated package ·Suitables for general purpose AC switching. Which can be used as an ON/OFF function in applications such as static relays, heating regulation,induction motor starting circuits. Or for phase control operation in light dimmers, motor speed controllers etc. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER VDRM Repetitive peak off-state voltage VRRM Repetitive peak off-state voltage IT(RMS) RMS on-state current (full sine wave)Tc=75℃ ITSM Non-repetitive peak on-state current tp=20ms Tj Operating junction temperature Tstg Storage tempera.

BTA08-600C : Available either in through-hole or surface-mount packages, the BTA08 - 600C triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control operation in light dimmers, motor speed controllers, ... The snubberless versions (BTA...W series) are specially recommended for use on inductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 2500V RMS) complying with UL standards. ABSOLUTE MAXIMUM RATINGS ( Ta = 25 OC) PARAMETER Symbol Value Unit Repetit.

BTA08-600CW : Available either in through-hole and surfacemount packages, these devices are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits or for phase control operation in light dimmers and motor speed controllers, etc. The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performance. Logic level versions are designed to interface directly with low power drivers such as Microcontrollers. By using an internal ceramic pad, the BTA series provide voltage insulated tab (rated at 2500 VRMS) in.

BTA08-600CW : isc Triacs BTA08-600CW FEATURES ·With TO-220AB insulated package ·Suitables for general purpose AC switching . which can be used as an ON/OFF function in applications such as static relays, heating regulation, Induction motor starting circuits or for phase control in light dimmers, motor speed controllers etc. ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER MIN UNIT VDRM Repetitive peak off-state voltage 600 V VRRM Repetitive peak reverse voltage 600 V IT(RMS) RMS on-state current (full sine wave)Tj=105℃ 8 A ITSM Non-repetitive peak on-state current tp=20ms 80 A Tj Operating junction te.

BTA08-600CW3G : BTA08-600CW3G Triacs Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features http://onsemi.com • • • • • • • • • Blocking Voltage to 600 V On-State Current Rating of 8 A RMS at 25°C Uniform Gate Trigger Currents in Three Quadrants High Immunity to dV/dt − 1500 V/ms minimum at 125°C Minimizes Snubber Networks for Protection Industry Standard TO-220AB Package High Commutating dI/dt − 1.5 A/ms minimum at 125°C Internally Isolated (2500 VRMS) These are Pb−Free Devices TRIACS 8 AMPERES RMS 600 VOLTS MT2 G 4 MT1 MARKING DIAGRAM MAXIMUM RATINGS (TJ = 25°C unless otherwise noted).

BTA08-600S : Available either in through-hole and surfacemount packages, these devices are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits or for phase control operation in light dimmers and motor speed controllers, etc. The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performance. Logic level versions are designed to interface directly with low power drivers such as Microcontrollers. By using an internal ceramic pad, the BTA series provide voltage insulated tab (rated at 2500 VRMS) in.

BTA08-600SW : Available either in through-hole and surfacemount packages, these devices are suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits or for phase control operation in light dimmers and motor speed controllers, etc. The Snubberless versions (BTA, BTB08_xxxxW and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performance. Logic level versions are designed to interface directly with low power drivers such as Microcontrollers. By using an internal ceramic pad, the BTA series provide voltage insulated tab (rated at 2500 VRMS) in.