| Part Number | SN54AHC32 |
| Manufacturer | Texas Instruments |
| Title | QUADRUPLE 2-INPUT POSITIVE-OR GATES |
| Description | The ’AHC32 devices are quadruple 2-input positive-OR gates. These devices perform the Boolean function Y = A • B or Y = A + B in positive logic. ... |
| Features |
1
• Operating Range 2-V to 5.5-V VCC • Latch-Up Performance Exceeds 250 mA Per JESD 17 • ESD Protection Exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) SN54AHC32 . . . J OR W PACKAGE SN74AHC32 . . . D, DB, DGV, N, NS, OR PW PAC... |
| File Size | 1.40MB |
| Datasheet |
|
SN54AHC367 : The ’AHC367 devices are hex buffers and line drivers designed for 2-V to 5.5-V VCC operation. These devices are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’AHC367 devices are organized as dual 4-line and 2-line buffers/drivers with active-low output-enable (1OE and 2OE) inputs. When OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resisto.
SN54AHC373 : ordering information The ’AHC373 devices are octal transparent D-type latches designed for 2-V to 5.5-V VCC operation. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. ORDERING INFORMATION TA PACKAGE† ORDERABLE PA.
SN54AHC374 : The SNx4AHC374 devices are octal edge-triggered D-type flip-flops that feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SSOP (20) 7.50 mm × 5.30 mm TVSOP (20) 5.00 mm × 4.40 mm SNx4AHC374 SOIC (20) 12.80 mm × 7.50 mm PDIP (20) 25.40 mm × 6.35 mm TSSOP (20) 6.50 mm × 4.40 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. 4 Simplified Schematic OE CLK C1 1Q 1D 1D To Seven Other.