| Part Number | SFH6139 |
| Manufacturer | Vishay Siliconix |
| Title | (SFH6138 / SFH6139) High Speed Optocoupler / 100 kBd / Low Input Current / High Gain |
| Description | High common mode transient immunity and very high current ratio together with 5300 VRMS insulation are achieved by coupling an LED with an integra... |
| Features |
• • • • • • • • • • High Current Transfer Ratio, 800 % Low Input Current Requirement, 0.5 mA High Output Current, 60 mA Isolation Test Voltage, 5300 VRMS TTL Compatible Output, 0.1 V VOL High Common Mode Rejection, 500 V/µs DC to 0.1 Megabit/Sec. Operation Adjustable Bandwidth-Access to Base Standar... |
| File Size | 96.99KB |
| Datasheet |
|
SFH6135 : The SFH6135 and SFH6136 optocouplers feature a high signal transmission rate and a high isolation resistance. They have a GaAIAs infrared emitting diode, optically coupled with an integrated photo detector which consists of a photo diode and a high-speed transistor in a DIP-8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages. ORDERING INFORMATION S FH 6 1 3 # - X 0 # # T PART NUMBER PACKAGE OPTION TAPE AND REEL DIP-8 7.62 mm Option 7 Option 6 10.16 mm Option 9 AGENCY CERTIFIED / PACKAGE U.
SFH6136 : The SFH6135 and SFH6136 optocouplers feature a high signal transmission rate and a high isolation resistance. They have a GaAIAs infrared emitting diode, optically coupled with an integrated photo detector which consists of a photo diode and a high-speed transistor in a DIP-8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages. ORDERING INFORMATION S FH 6 1 3 # - X 0 # # T PART NUMBER PACKAGE OPTION TAPE AND REEL DIP-8 7.62 mm Option 7 Option 6 10.16 mm Option 9 AGENCY CERTIFIED / PACKAGE U.
SFH6138 : High common mode transient immunity and very high current ratio together with 5300 VRMS insulation are achieved by coupling an LED with an integrated high For additional information on the available options refer to Option Information. Document Number 83669 Rev. 1.5, 26-Oct-04 www.vishay.com 1 SFH6138/ SFH6139 Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended .