SY100EL16VS

SY100EL16V : The SY100EL16V is a differential receiver. With fast output transition times, the SY100EL16V is ideally suited for interfacing with high-frequency sources. The SY100EL16V provides a VBB output for either single-ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the SY100EL16V as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01μF capacitor. Under open input conditions (pulled to VEE), internal input clamps will force the Q output LOW. Package Type 8-Pin MSOP (K8-1) 8-Pin SOIC (Z8-1)  2018 Microchip Technology Inc. DS20006115A-page 1 SY100EL16V 1.0 ELECTRICAL CHARACTERISTIC.

SY100EL16VA-VF : s 3.3V and 5V power supply options s 250ps propagation delay s Very high voltage gain vs. standard EL16 or EL16V s Ideal for Pulse Amplifier and Limiting Amplifier applications s Data synchronous Enable/Disable (/EN) on QHG and /QHG provides for complete glitchless gating of the outputs s Ideal for gating timing signals s Complete solution for high quality, high frequency crystal oscillator applications s Internal 75kΩ input pull-down resistors s Available in both 8- and 16-pin SOIC package; 8- and 10-pin (3mm) MSOP and in DIE form PIN NAMES Pin D Q QHG VBB /EN Function Data Inputs Data Outputs Data Outputs w/High Gain Reference Voltage Output Enable Input TRUTH TABLE /EN QHG Output 0 Da.

SY100EL16VO : The SY100EL16VO is a differential receiver amplifier optimized for crystal oscillator applications. The device includes an additional low gain (+10V/V) output stage (QFB) ideal for feedback applications common in crystal oscillator gain blocks. The SY100EL16VO is fully differential, with a bandwidth 800MHz over temperature and voltage. For applications that require output disable control, an Enable pin (/EN) will force the differential output into a fixed logic state. The SY100EL16VO also includes a VBB reference voltage for single-ended or AC-coupled applications. The SY100EL16VO PECL logic is 100k ECL compatible. Operation is guaranteed over the –40°C to +85°C temperature range and 3.3V .

SY100EL16VS : The SY100EL16VS is a differential receiver with variable output swing. The device is functionally equivalent to the EL16V device with an input that controls the amplitude of the outputs. The operational range of the EL16VS control input is from VBB (max. swing) to VCC (min. swing). Simple control of the output swing can be obtained by a variable resistor between the VBB pin and VCC with the wiper driving VCTRL. The EL16VS provides a VBB output for either single ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL16VS as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01 μF .