TS836

TS8308500 : The TS8308500 is a monolithic 8-bit analog-to-digital converter, designed for digitizing wide bandwidth analog signals at very high sampling rates of up to 500 Msps. The TS8308500 is using an innovative architecture, including an on-chip Sample and Hold (S/H), and is fabricated with an advanced high-speed bipolar process. The on-chip S/H has a 1.3 GHz full power input bandwidth, providing excellent dynamic performance in undersampling applications (High IF digitizing). Rev. 2193A–BDC–0 2193A–BDC–04/03 6/03 1 Functional Description Block Diagram Figure 1. Simplified Block Diagram GAIN VIN, VINB Master/Slave Track & Hold Amplifier Resistor Chain Analog Encoding Block 4 Interpolation S.

TS831 : The TS831 is an ultra low power integrated circuit incorporating a high stability band-gap voltage reference and a comparator with an open drain output. The threshold voltage is set at 4.33V for TS831-5, 4.5V for TS831-4 and 2.71V for TS831-3 by internal thermally matched resistors. The comparator exhibits a 20µs response (with 10mV overdrive) and has an open drain output active when input voltage is lower than the threshold. An internal hysteresis, 100mV for TS831-4 / TS831-5 and 60mV for TS831-3, increases the comparator’s noise margin and prevents false reset operation. APPLICATION s Power-on reset generator for microcontroller s Power failure detector ORDER CODE Part Number TS831-5I T.

TS83102G0B : The TS83102G0B is a monolithic 10-bit analog-to-digital converter, designed for digitizing wide bandwidth analog signals at very high sampling rates of up to 2 Gsps. It uses an innovative architecture, including an on-chip Sample and Hold (S/H). The 3.3 GHz full power input bandwidth and band flatness performances enable the digitizing of high IF and large bandwidth signals. 2101D–BDC–06/04 Figure 1. Simplified Block Diagram PGEB Sample &Hold VIN VINB 50 50 B/GB OR ORB Analog Quantizer D9 D9B Logic block D0 D0B DR DRB GA CLK CLKB 50 50 SDA Clock generation SDA DECB/ DIODE DRRB Functional Description The TS83102G0B is a 10-bit 2 Gsps ADC. The device includes a front-end master/sl.

TS83102G0BMGS : Features • Up to 2 Gsps Sampling Rate • Power Consumption: 4.6W • 500 mVpp Differential 100Ω or Single-ended 50Ω (±2 %) Analog Inputs • Differential 100Ω or Single-ended 50Ω Clock Inputs • ECL or LVDS Output Compatibility • 50Ω Differential Outputs with Common Mode not Dependent on Temperature • ADC Gain Adjust • Sampling Delay Adjust • Offset Control Capability • Data Ready Output with Asynchronous Reset • Out-of-range Output Bit • Selectable Decimation by 32-function • Gray or Binary Selectable Output Data; NRZ Output Mode • Pattern Generator Output (for Acquisition System Monitoring) • Radiation Tolerance Oriented Design (More Than 100 Krad (Si) Expected) • CI-CGA152 Cavity Down Hermetic .

TS834 : The TS834 is a voltage supervisor providing two different outputs (one active low and one active high) with an integrated timer that can be disabled. It incorporates a high stability bandgap voltage reference and a comparator with open drain output. The threshold voltage is set at 4.33V by internal thermally matched resistors. The comparator exhibits a 20µs response (with 10mV overdrive). An internal hysteresis of 100mV increases the comparator noise margin and prevents false reset operation. APPLICATIONS Computers Microcontrollers Microprocessor systems Intelligent instruments Power failure detection PIN CONNECTIONS Rese t Low 1 8 Rese t High Vcc 2 7 NC NC 3 6 NC . . . . . Gnd.

TS835 : www.DataSheet4U.com .

TS8388B : The TS8388B is a monolithic 8-bit analog-to-digital converter, designed for digitizing wide bandwidth analog signals at very high sampling rates of up to 1 GSPS. The TS8388B uses an innovative architecture, including an on-chip Sample and Hold (S/H), and is fabricated with an advanced high speed bipolar process. The on-chip S/H has a 1.5 GHz full power input bandwidth, providing excellent dynamic performance in undersampling applications (High IF digitizing). Rev. 2144C–BDC–04/03 1 Functional Description Block Diagram The following figure shows the simplified block diagram. Figure 1. Simplified Block Diagram GAIN MASTER/SLAVE TRACK & HOLD AMPLIFIER VIN, VINB G=2 T/H G=1 T/H G=1 RESISTOR.

TS83C51RB2 : Atmel TS8xC51Rx2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS8xC51Rx2 retains all features of the 80C51 with extended ROM/EPROM capacity (16/32/64 Kbytes), 256 bytes of internal RAM, a 7-source , 4-level interrupt system, an on-chip oscilator and three timer/counters. In addition, the TS80C51Rx2 has a Programmable Counter Array, an XRAM of 256 or 768 bytes, a Hardware Watchdog Timer, a more versatile serial channel that High Performance 8-bit Microcontroller TS80C51RA2 TS83C51RB2 TS83C51RC2 TS83C51RD2 TS87C51RB2 TS87C51RC2 TS87C51RD2 AT80C51RA2 AT83C51RB2 AT83C51RC2 AT83C51RD2 AT87C51RB2 AT87C51RC2 Rev. 4188F–805.

TS83C51RC2 : Atmel TS8xC51Rx2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS8xC51Rx2 retains all features of the 80C51 with extended ROM/EPROM capacity (16/32/64 Kbytes), 256 bytes of internal RAM, a 7-source , 4-level interrupt system, an on-chip oscilator and three timer/counters. In addition, the TS80C51Rx2 has a Programmable Counter Array, an XRAM of 256 or 768 bytes, a Hardware Watchdog Timer, a more versatile serial channel that High Performance 8-bit Microcontroller TS80C51RA2 TS83C51RB2 TS83C51RC2 TS83C51RD2 TS87C51RB2 TS87C51RC2 TS87C51RD2 AT80C51RA2 AT83C51RB2 AT83C51RC2 AT83C51RD2 AT87C51RB2 AT87C51RC2 Rev. 4188F–805.

TS83C51RD2 : Atmel TS8xC51Rx2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS8xC51Rx2 retains all features of the 80C51 with extended ROM/EPROM capacity (16/32/64 Kbytes), 256 bytes of internal RAM, a 7-source , 4-level interrupt system, an on-chip oscilator and three timer/counters. In addition, the TS80C51Rx2 has a Programmable Counter Array, an XRAM of 256 or 768 bytes, a Hardware Watchdog Timer, a more versatile serial channel that High Performance 8-bit Microcontroller TS80C51RA2 TS83C51RB2 TS83C51RC2 TS83C51RD2 TS87C51RB2 TS87C51RC2 TS87C51RD2 AT80C51RA2 AT83C51RB2 AT83C51RC2 AT83C51RD2 AT87C51RB2 AT87C51RC2 Rev. 4188F–805.

TS83C51Rx2 : Atmel Wireless & Microcontrollers TS80C51Rx2 is high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C51Rx2 retains all features of the 80C51 with extended ROM/EPROM capacity (16/32/64 Kbytes), 256 bytes of internal RAM, a 7-source , 4-level interrupt system, an on-chip oscilator and three timer/counters. In addition, the TS80C51Rx2 has a Programmable Counter Array, an XRAM of 256 or 768 bytes, a Hardware Watchdog Timer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism. The fully static design of the TS80C51Rx2 allows to reduce system power consumption .

TS83C51U2 : TS80C51U2 is high performance CMOS ROM, OTP and EPROM versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C51U2 retains all features of the 80C51 with extended ROM/EPROM capacity (16 Kbytes), 256 bytes of internal RAM, a 7-source , 4-level interrupt system, an on-chip oscilator and three timer/counters. In addition, the TS80C51U2 has a second UART, enhanced functions on both UART, enhanced timer 2, a hardware watchdog timer, a dual data pointer, a baud rate generator and a X2 speed improvement mechanism. The fully static design of the TS80C51U2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS8.