TL432

TL430 : ordering information LP PACKAGE (TOP VIEW) CATHODE ANODE REF The TL430 is a 3-terminal adjustable shunt regulator, featuring excellent temperature stability, wide operating current range, and low output noise. The output voltage can be set by two external resistors to any desired value between 3 V and 30 V. The TL430 can replace Zener diodes in many applications, providing improved performance. The TL430C is characterized for operation from 0°C to 70°C. ORDERING INFORMATION TA PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING 0°C to 70°C Bulk of 1000 TO-226 / TO-92 (LP) Reel of 2000 TL430CLP TL430CLPR TL430C † Package drawings, standard packing quantities, thermal data, symbolizati.

TL431 : The TL431 and TL432 are three terminal adjustable shunt regulators offering excellent temperature stability and output current handling capability up to 100mA. The output voltage may be set to any chosen voltage between 2.5 and 36 volts by selection of two external divider resistors. The devices can be used as a replacement for zener diodes in many applications requiring an improvement in zener performance. Diodes’ TL431 has the same electrical specifications as the industry standard ‘431 and is available in 2 grades with initial tolerances of 1% and 0.5% for the A and B grades respectively. Features • Temperature range -40 to +125ºC • Reference Voltage Tolerance at 25°C • TL431A: 2.495V ± 1.

TL431 : Order this document by TL431/D TL431, A, B Programmable Precision References The TL431, A, B integrated circuits are three–terminal programmable shunt regulator diodes. These monolithic IC voltage references operate as a low temperature coefficient zener which is programmable from Vref to 36 V with two external resistors. These devices exhibit a wide operating current range of 1.0 mA to 100 mA with a typical dynamic impedance of 0.22 Ω. The characteristics of these references make them excellent replacements for zener diodes in many applications such as digital voltmeters, power supplies, and op amp circuitry. The 2.5 V reference makes it convenient to obtain a stable reference from 5.0 V l.

TL431 : The TL431/TL431A are three-terminal adjustable regulator series with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors These devices have a typical dynamic output impedance of 0.2Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excel lent replacement for zener diodes in many applications. TO-92 1 1. Ref 2. Anode 3. Cathode 8-DIP 1 1.Cathode 2.3.4.5.7.NC 6.Anode 8.Ref 8-SOP 1 1. Cathode 2. 3. 6. 7. Anode 8. Ref 4. 5. NC ©2011 Fairchild Semiconductor Corporation Rev. 1.0.4 TL431/TL431A Internal Block Diagra.

TL431 : The TL431 and TL432 devices are three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and military temperature ranges. The output voltage can be set to any value between Vref (approximately 2.5 V) and 36 V, with two external resistors. These devices have a typical output impedance of 0.2 Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excellent replacements for Zener diodes in many applications, such as on-board regulation, adjustable power supplies, and switching power supplies. The TL432 device has exactly the same functionality and electrical specifications as the TL431 device, bu.

TL431 : Three-terminal shunt regulator family with an output voltage range between Vref = 2.495 V and 36 V, to be set by two external resistors. Table 1. Product overview Reference voltage Temperature range (Tamb) tolerance (Vref) 0 °C to 70 °C -40 °C to 85 °C 2.0 % TL431CDBZR TL431IDBZR 1.0 % TL431ACDBZR TL431AIDBZR 0.5 % TL431BCDBZR TL431BIDBZR -40 °C to 125 °C TL431QDBZR TL431FDT TL431MFDT TL431AQDBZR TL431AFDT TL431AMFDT TL431BQDBZR TL431BFDT TL431BMFDT Pinning configuration (see Table 5) normal pinning normal pinning mirrored pinning normal pinning normal pinning mirrored pinning normal pinning normal pinning mirrored pinning 1.2. Features and benefits • Programmable output vol.

TL431 : The UTC TL431 is a three-terminal adjustable regulator with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5V) and 36V with two external resistors. It provides very wide applications, including shunt regulator, series regulator, switching regulator, voltage reference and others.  FEATURES * Programmable output Voltage to 36V. * Low dynamic output impedance 0.2Ω. * Sink current capability of 1.0 to 100mA. * Equivalent full-range temperature coefficient of 50ppm/°C typical for operation over full rated operating temperature range.  ORDERING INFORMATION Ordering Number Lead Free Halogen Free Pack.

TL431 : The TL431 and TL432 are adjustable shunt voltage references with guaranteed temperature stability over the entire operating temperature range. The device temperature range is extended for the automotive version from -40 °C up to +125 °C. The output voltage can be set to any value between 2.5 and 36 V with two external resistors. The TL431 and TL432 operate with a wide current range from 1 to 100 mA with a typical dynamic impedance of 0.22 Ω. D SO-8 (Batwing plastic micropackage) Features • AEC-Q100 qualified • Adjustable output voltage: 2.5 to 36 V • Sink current capability: 1 to 100 mA • Typical output impedance: 0.22 Ω • 0.5% voltage precision only on the TL431B version • 1% and 2% volt.

TL431 : The TL431/TL431A are three-terminal adjustable regulator series with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors These devices have a typical dynamic output impedance of 0.2Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excel lent replacement for zener diodes in many applications. TO-92 1 1. Ref 2. Anode 3. Cathode 8-DIP 1 1.Cathode 2.3.4.5.7.NC 6.Anode 8.Ref 8-SOP 1 1. Cathode 2. 3. 6. 7. Anode 8. Ref 4. 5. NC Rev. 1.0.4 ©2011 Fairchild Semiconductor Corporation TL431/TL431A Internal Block Diagr.

TL431 : Three-terminal shunt regulator family with an output voltage range between Vref and 36 V, to be set by two external resistors. • The TL431xDBZR types feature an enhanced stability area with a very low load capacity requirement. • The TL431xFDT types offer an enhanced stability area and a higher ElectroMagnetic Interference (EMI) ruggedness, for example, for Switch Mode Power Supply (SMPS) applications. • The TL431xSDT types are designed for standard requirements and linear applications. Table 1. Product overview Reference voltage tolerance (Vref) Temperature range (Tamb) 0C to 70 C 40 C to 85 C 2 % TL431CDBZR TL431IDBZR 1 % TL431ACDBZR TL431AIDBZR 0.5 % TL431BCDBZR TL431BIDBZ.

TL431-Q1 : The TL431LI-Q1 / TL432LI-Q1 are pin-to-pin alternatives to TL431-Q1 / TL432-Q1. TL43xLI-Q1 offers better stability, lower temperature drift (VI(dev)), and lower reference current (Iref) for improved system accuracy. The TL431-Q1 is a three-pin adjustable shunt regulator with specified thermal stability over applicable automotive temperature ranges. The output voltage can be set to any value from VREF (approximately 2.5 V) to 36 V, with two external resistors (see Figure 28). This device has a typical output impedance of 0.2 Ω. Active output circuitry provides a sharp turnon characteristic, making this device an excellent replacement for Zener diodes in many applications, such as onboard regu.

TL431A : The TL431A is a three-terminal adjustable shunt regulator offering excellent temperature stability. This device has a typical dynamic output impedance of 0.2Ω. The device can be used as a replacement for zener diodes in many applications. FEATURES The Output Voltage can be Adjusted to 36V Low Dynamic Output Impedance, its Typical Value is 0.2Ω Trapping Current Capability is 1~100mA Low Output Noise Voltage Fast On-State Response The Effective Temperature Compensation in the Working Range of Full Temperature The Typical Value of the Equivalent Temperature Factor in the Whole Temperature Scope is 50 ppm/°C APPLICATIONS Shunt Regulator High-Current Shunt Regulator Precision Current Limiter SOT.

TL431A : Three-terminal shunt regulator family with an output voltage range between Vref = 2.495 V and 36 V, to be set by two external resistors. Table 1. Product overview Reference voltage Temperature range (Tamb) tolerance (Vref) 0 °C to 70 °C -40 °C to 85 °C 2.0 % TL431CDBZR TL431IDBZR 1.0 % TL431ACDBZR TL431AIDBZR 0.5 % TL431BCDBZR TL431BIDBZR -40 °C to 125 °C TL431QDBZR TL431FDT TL431MFDT TL431AQDBZR TL431AFDT TL431AMFDT TL431BQDBZR TL431BFDT TL431BMFDT Pinning configuration (see Table 5) normal pinning normal pinning mirrored pinning normal pinning normal pinning mirrored pinning normal pinning normal pinning mirrored pinning 1.2. Features and benefits • Programmable output vol.

TL431A : DATA SHEET www.onsemi.com Programmable Precision References TL431A, B Series, NCV431A, B Series, SCV431A The TL431A, B integrated circuits are three−terminal programmable shunt regulator diodes. These monolithic IC voltage references operate as a low temperature coefficient zener which is programmable from Vref to 36 V with two external resistors. These devices exhibit a wide operating current range of 1.0 mA to 100 mA with a typical dynamic impedance of 0.22 W. The characteristics of these references make them excellent replacements for zener diodes in many applications such as digital voltmeters, power supplies, and op amp circuitry. The 2.5 V reference makes it convenient to obtain a sta.

TL431A : The TL431 is high-voltage three-terminal adjustable voltage references, with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (2.5V) and 36V with two external resistors. These devices have a typical output impedance of 0.2Ω. Active output circuitry provides a very sharp turn-on characteristic making the TL431 excellent replacements for lowvoltage zener diodes in many applications, including onboard regulation and adjustable power supplies. TL431XS-TRG ROHS Compliant This is Halogen Free Adjustable Precision Shunt Regulatror ■FEATURE  Voltage Reference Accuracy of 1%,0.5%  Sink Current Capability f.

TL431A : The TL431/TL431A are three-terminal adjustable regulator series with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors These devices have a typical dynamic output impedance of 0.2Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excel lent replacement for zener diodes in many applications. TO-92 1 1. Ref 2. Anode 3. Cathode 8-DIP 1 1.Cathode 2.3.4.5.7.NC 6.Anode 8.Ref 8-SOP 1 1. Cathode 2. 3. 6. 7. Anode 8. Ref 4. 5. NC Rev. 1.0.4 ©2011 Fairchild Semiconductor Corporation TL431/TL431A Internal Block Diagr.

TL431A : The TL431 and TL432 are three terminal adjustable shunt regulators offering excellent temperature stability and output current handling capability up to 100mA. The output voltage may be set to any chosen voltage between 2.5 and 36 volts by selection of two external divider resistors. The devices can be used as a replacement for zener diodes in many applications requiring an improvement in zener performance. Diodes’ TL431 has the same electrical specifications as the industry standard ‘431 and is available in 2 grades with initial tolerances of 1% and 0.5% for the A and B grades respectively. Features • Temperature range -40 to +125ºC • Reference Voltage Tolerance at 25°C • TL431A: 2.495V ± 1.