HYS72T128020

HYS72T128020GR : The INFINEON HYS72Taaabcd[G/H]R module family are low profile Registered DIMM modules with 30,00 mm height based on DDR2 technology. DIMMs are available in 64M x 72 (512MByte), 128M x 72 (1GByte) and 256M x 72 (2GByte) organisation and density, intended for mounting into 240 pin connector sockets. The memory array is designed with 512Mb Double Data Rate (DDR2) Synchronous DRAMs for ECC applications. All control and address signals are re-driven on the DIMM using register devices and a PLL for the clock distribution. This reduces capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board, which provide a proper voltage supp.

HYS72T128020GR-37-A : The INFINEON HYS72Taaabcd[G/H]R module family are low profile Registered DIMM modules with 30,00 mm height based on DDR2 technology. DIMMs are available in 64M x 72 (512MByte), 128M x 72 (1GByte) and 256M x 72 (2GByte) organisation and density, intended for mounting into 240 pin connector sockets. The memory array is designed with 512Mb Double Data Rate (DDR2) Synchronous DRAMs for ECC applications. All control and address signals are re-driven on the DIMM using register devices and a PLL for the clock distribution. This reduces capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board, which provide a proper voltage supp.

HYS72T128020GR-5-A : The INFINEON HYS72Taaabcd[G/H]R module family are low profile Registered DIMM modules with 30,00 mm height based on DDR2 technology. DIMMs are available in 64M x 72 (512MByte), 128M x 72 (1GByte) and 256M x 72 (2GByte) organisation and density, intended for mounting into 240 pin connector sockets. The memory array is designed with 512Mb Double Data Rate (DDR2) Synchronous DRAMs for ECC applications. All control and address signals are re-driven on the DIMM using register devices and a PLL for the clock distribution. This reduces capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board, which provide a proper voltage supp.

HYS72T128020GU : and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device o.

HYS72T128020GU-37-A : and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device o.

HYS72T128020GU-5-A : and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device o.

HYS72T128020HFA-3.7-A : and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device o.

HYS72T128020HFA-3S-A : and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device o.

HYS72T128020HFN-3.7-A : and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device o.

HYS72T128020HFN-3S-A : and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device o.

HYS72T128020HP2.5-B : capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board. The DIMMs feature serial presence detect based on a serial E2PROM device using the 2-pin I2C protocol. The first 128 bytes are programmed with configuration data and the second 128 bytes are available to the customer. The Qimonda HYS72T[64/128/256]xxxHP–[25F/2.5/3/3S/3.7]–B module family are Registered DIMM (with parity) modules with 30 mm height based on DDR2 technology. DIMMs are available as ECC modules in 64M × 72 (512 MB), 128M × 72 (1 GB), 256M x72 (2GB) organization and density, intended for mounting into 240-Pin connector sockets. The memory array is desi.

HYS72T128020HP25F-B : capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board. The DIMMs feature serial presence detect based on a serial E2PROM device using the 2-pin I2C protocol. The first 128 bytes are programmed with configuration data and the second 128 bytes are available to the customer. The Qimonda HYS72T[64/128/256]xxxHP–[25F/2.5/3/3S/3.7]–B module family are Registered DIMM (with parity) modules with 30 mm height based on DDR2 technology. DIMMs are available as ECC modules in 64M × 72 (512 MB), 128M × 72 (1 GB), 256M x72 (2GB) organization and density, intended for mounting into 240-Pin connector sockets. The memory array is desi.

HYS72T128020HP3-B : capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board. The DIMMs feature serial presence detect based on a serial E2PROM device using the 2-pin I2C protocol. The first 128 bytes are programmed with configuration data and the second 128 bytes are available to the customer. The Qimonda HYS72T[64/128/256]xxxHP–[25F/2.5/3/3S/3.7]–B module family are Registered DIMM (with parity) modules with 30 mm height based on DDR2 technology. DIMMs are available as ECC modules in 64M × 72 (512 MB), 128M × 72 (1 GB), 256M x72 (2GB) organization and density, intended for mounting into 240-Pin connector sockets. The memory array is desi.

HYS72T128020HP3.7-B : capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board. The DIMMs feature serial presence detect based on a serial E2PROM device using the 2-pin I2C protocol. The first 128 bytes are programmed with configuration data and the second 128 bytes are available to the customer. The Qimonda HYS72T[64/128/256]xxxHP–[25F/2.5/3/3S/3.7]–B module family are Registered DIMM (with parity) modules with 30 mm height based on DDR2 technology. DIMMs are available as ECC modules in 64M × 72 (512 MB), 128M × 72 (1 GB), 256M x72 (2GB) organization and density, intended for mounting into 240-Pin connector sockets. The memory array is desi.

HYS72T128020HP3S-B : capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board. The DIMMs feature serial presence detect based on a serial E2PROM device using the 2-pin I2C protocol. The first 128 bytes are programmed with configuration data and the second 128 bytes are available to the customer. The Qimonda HYS72T[64/128/256]xxxHP–[25F/2.5/3/3S/3.7]–B module family are Registered DIMM (with parity) modules with 30 mm height based on DDR2 technology. DIMMs are available as ECC modules in 64M × 72 (512 MB), 128M × 72 (1 GB), 256M x72 (2GB) organization and density, intended for mounting into 240-Pin connector sockets. The memory array is desi.

HYS72T128020HR : The INFINEON HYS72Taaabcd[G/H]R module family are low profile Registered DIMM modules with 30,00 mm height based on DDR2 technology. DIMMs are available in 64M x 72 (512MByte), 128M x 72 (1GByte) and 256M x 72 (2GByte) organisation and density, intended for mounting into 240 pin connector sockets. The memory array is designed with 512Mb Double Data Rate (DDR2) Synchronous DRAMs for ECC applications. All control and address signals are re-driven on the DIMM using register devices and a PLL for the clock distribution. This reduces capacitive loading to the system bus, but adds one cycle to the SDRAM timing. Decoupling capacitors are mounted on the PCB board, which provide a proper voltage supp.