TS861

TS86101G2B : TS86101G2B 4:1 10-bit 1.2 Gsps MUXDAC Datasheet Main Features • 10-bit Resolution • 1.2 Gsps Guaranteed Conversion Rate, 1.4 Gsps Typical • 4:1 Integrated Parallel MUX • PECL/LVDS Differential Data and Clock Inputs • 2 Vpp Differential Analog Output Swing • Output Impedance: 50Ω Single-ended, 100Ω Differential • Programmable DSP Clock • Power Up Reset for Easy Synchronization of Several DACs • Dual Power Supply: ±5V • CBGA 255 Package for = C and V Grades • CI-CGA 255 Package for M Grade • Evaluation Board TSEV86101G2BGL Performance • Broadband – NPR: 49 dB at Fs = 1.2 Gsps: 9.5 bits equivalent (20 MHz to 580 MHz Broadband Pattern, 25 MHz Notch Centered Around 250 MHz) • Single Tone – SFDR.

TS86101G2B : The TS86101G2B is a 10-bit 1.2 Gsps DAC with an integrated 4:1 multiplexer, allowing easy interfacing with standard FPGAs. The enhanced linearity and Noise Power Ratio (NPR) performance (9.5 bits equivalent at 1.2 Gsps) and over 550 MHz instantaneous bandwidth make this product particularly suitable for high-end applications such as arbitrary waveform generators and broadband DDS systems. 5343CS–BDC–08/04 This is a summary document. A complete document is not available at this time. For more information, please contact your local Atmel sales office. 1 www.DataSheet4U.com Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Atmel Opera.

TS862 : The TS86x (Single, Dual & Quad) is a Rail to Rail comparator characterized for 2.7V to 10V operation over -40°C to +85°C temperature range. It exhibits an excellent speed to power ratio, featuring a current consumption of 6µA per comparator and a response time of 500ns at 2.7V for 100mV overdrive. Due to its ultra low power consumption and its availability in tiny package, the TS86x comparator family is perfectly suited to battery powered systems. The output stage is designed with a push pull structure allowing a direct connection to microcontroler without additionnal pull-up resistor. www.DataSheet4U.com TS861ID-TS861IDT N.C. Inverting Input 1 Non-inverting Input 1 1 2 3 + 8 N.C. 7 VCC .

TS862C12R : TS862C12R Major characteristics VRRM VF IO 120 0.88 10 V V A (10A) (120V / 10A ) [0401] High Voltage Schottky barrier diode Outline drawings, mm 0.9 ±0.3 10 +0.5 Characteristics TS862C12R Units Condition Tc=25°C MAX. 1.2 ±0.2 5.08 4.5 ±0.2 1.32 1.5 Max 9.3 ±0.5 0.8 —0.1 2.7 +0.2 0.4 +0.2 1. Gate 2, 4. Drain 3. Source Features Low VF High Voltage Center tap connection Applications High frequency operation DC-DC converters AC adapter Package : T-pack Epoxy resin UL : V-0 Connection diagram Maximum ratings and characteristics Absolute maximum ratings (at Tc=25°C Unless otherwise specified ) Item Repetitive peak surge reverse voltage Repetitive peak reverse voltage Average outp.

TS864 : The TS86x (Single, Dual & Quad) is a Rail to Rail comparator characterized for 2.7V to 10V operation over -40°C to +85°C temperature range. It exhibits an excellent speed to power ratio, featuring a current consumption of 6µA per comparator and a response time of 500ns at 2.7V for 100mV overdrive. Due to its ultra low power consumption and its availability in tiny package, the TS86x comparator family is perfectly suited to battery powered systems. The output stage is designed with a push pull structure allowing a direct connection to microcontroler without additionnal pull-up resistor. www.DataSheet4U.com TS861ID-TS861IDT N.C. Inverting Input 1 Non-inverting Input 1 1 2 3 + 8 N.C. 7 VCC .