RT9035

RT9030 : The RT9030 is a high-performance, 150mA LDO regulator, offering extremely high PSRR and ultra-low dropout. Ideal for portable RF and wireless applications with demanding performance and space requirements. The RT9030 quiescent current as low as 25μA, further prolonging the battery life. The RT9030 also works with low-ESR ceramic capacitors, reducing the amount of board space necessary for power applications, critical in handheld wireless devices. The RT9030 consumes typical 0.7μA in shutdown mode and has fast turn-on time less than 40μs. The other features include ultra-low dropout voltage, high output accuracy, current limiting protection, and high ripple rejection ratio. Available in the S.

RT9032 : Features The RT9032 is a dual channels, low noise and low dropout Wide Operating Voltage Ranges : 2.5V to 5.5V voltage regulator souring up to 300mA at each channel. Dual LDO Output The output voltage range is from 1.1V to 3.3V by operating Pin Programmable Output Voltage voltage range from 2.5V to 5.5V. Low-Noise for RF Application The output voltages of the RT9032 can be programmed by setting the voltage of P1 and P2. There are 9 different voltage settings in one chip. User can choose output voltages easily by setting P1, P2 to VDD, GND or floating. The RT9032 offers 3% accuracy, low dropout (330mV @300mA) and extremely low ground current, only 32μA per LDO. The shutdown current .

RT9033 : The RT9033 is a low dropout linear regulator designed for high output current applications with critical performance. The IC responds very fast to step changes in load, which is suitable for low voltage microprocessor applications. The RT9033 uses an internal P-MOSFET as the pass device, which does not cause extra GND current in heavy load and dropout condition. The shutdown mode of low operation current makes the IC suitable for power-saving systems. The RT9033 also works well with low-ESR ceramic capacitors, reducing the amount of board space necessary for power applications and consumes less than 1μA in shutdown mode. The other features include ultra low dropout voltage, high output accur.

RT9037 : The RT9037 is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9037 performance is optimized for battery-powered systems to deliver ultra low noise and low quiescent current. Regulator ground current increases only slightly in dropout, further prolonging the battery life. The RT9037 also works with low-ESR ceramic capacitors, reducing the amount of board space necessary for power applications, critical in hand-held wireless devices. The RT9037 consumes less than 0.01uA in shutdown mode and has fast turn-on time less than 50us. The other features include ultra low dropout voltage, high output accuracy, current limiting protection, and.