| Part Number | CS4101 |
| Manufacturer | Cherry Semiconductor Corporation |
| Title | Precision Air-Core Tach/Speedo Driver |
| Description | Features The CS4101 is specifically designed for use with air-core meter movements. The IC provides all the functions necessary for an analog ta... |
| Features |
The CS4101 is specifically designed for use with air-core meter movements. The IC provides all the functions necessary for an analog tachometer or speedometer. The CS4101 takes a speed sensor input and generates sine and cosine related output signals to differentially drive an air-core meter.
Many ...
|
| File Size | 167.65KB |
| Datasheet |
|
CS4100V-01L : Document 132 Current Sense Transformers These low cost Coilcraft current sensing transformers are designed for use up to 1 MHz. They incorporate the current and sense windings in one small, encapsulated package requiring minimum board space. Coilcraft current sensing transformers are designed to meet UL/CSA/IEC 60950 Reinforced Insulation specification and provide 3 mm creepage/clearance between primary and secondary windings. Winding to winding isolation (hipot) is 3750 Vrms, tested for one minute. Applications include feedback control, overload sensing, detecting load drop or shutdown, and proportional output. Coilcraft Designer’s Kit P403 contains the three standard current sensing trans.
CS4103 : The National Semiconductor® Geode™ CS4103 is a three crystal or a 24.576 MHz clock input. The CS4103 operates port 400 Mbit/sec IEEE 1394 Physical Layer (PHY) device. from a single 3.3V supply and supports transfers at 98.304, The CS4103 complies to revision 2.0 of the P1394a specifi- 196.608, and 393.216 Mbit/sec, (usually referred to as 100, cation. The device is a three port implementation of a reusable cell design scalable from one to sixteen ports. The CS4103 supports all of the P1394a enhancements including connection debounce, arbitrated reset, ack-accelerated arbitration, fly-by concatenation, multi-speed packet concatenation, PHY pinging, priority arbitration, and Suspend/Resume.
CS410899A : Powerex Dual Diode & Single Diode Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. POW-R-BLOKTM has been tested and recognized by the Underwriters Laboratories. Features: T Electrically Isolated Heatsinking T DBC Alumina (Al2O3) Insulator T Copper Baseplate T Low Thermal Impedance for Improved Current Capability T UL Recognized (E78240) Benefits: T No Additional Insulation Components Required T Easy Installation T No Clamping Components Required T Reduce Engineering Time Applications: T Power Supplies T Bridge Circuits T AC & DC Motor Drives T Battery Supplies T.