SMS15C

SMS15 : SMS15 TVS/ESD DIODE ARRAY AND LATCH-UP PROTECTION Features ● Ultra low leakage: nA level ● Operating voltage: 15V ● Low clamping voltage ● Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV – IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lightning) 12A (8/20μs) ● RoHS Compliant Dimensions SOT-26 Applications ● USB 2.0 power and data line ● Set-top box and digital TV ● Digital video interface (DVI) ● Notebook Computers ● SIM Ports ● 10/100 Ethernet Pin Configuration Mechanical Characteristics ● Package: SOT-26 ● Lead Finish: Lead Free ● UL Flammability Classification Rating 94V-0 ● Quantity Per Reel:3,000pcs ● Reel Size:.

SMS15 : The SMS series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect up to four lines. They are available with operating voltages of 5V, 12V, 15V and 24V. They are unidirectional devices and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large crosssectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage and no device degradation. The.

SMS15 : The SMSxx and SMSxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic Discharge (ESD). This series is ideally suited for use in portable electronics such as SMART phones, laptops, and other wireless devices. The SMSxx and SMSxxC series is usable on I/O ports where the signal voltage is positive. These devices will also provide protection in accordance with IEC 61000-4-2 and IEC 61000-4-4 requirements. This series is available in a SOT23-6 package configuration and is rated at 350 Watts peak pulse power (8/20µs) per line. sot-23-6 package Features • Compatible with IEC 61000-4-2 (ESD):.

SMS15 : This 6 pin 4 line unidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 61000-4-2, electrical fast transients (EFT) per IEC 61000-4-4 and effects of secondary lighting. These arrays are used to protect 4 discrete lines utilizing pins (1,3,4,6) with a common anode (pins 2,5) configuration. The SMS03 thru SMS24 product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. These Transient Voltage Suppressor (TVS) diode arrays protect 3.0/3.3 volt components such as DRAM’s SRAM’s CMOS, HCMOS, H.

SMS150 : SMS120 ... SMS1100 SMS120 ... SMS1100 SMD Schottky Barrier Rectifier Diodes SMD Schottky-Gleichrichterdioden Version 2017-02-14 ~ DO-213AB Plastic MELF Typical Applications Output Rectification in DC/DC Converters, Polarity Protection, Free-wheeling diodes Commercial grade 1) 0.1 0.2 _+2.5 Features Low forward voltage drop High power dissipation Compliant to RoHS, REACH, Conflict Minerals 1) _0.5 0.4 Type Typ ±0.35.0 Mechanical Data 1) _0.5 0.4 Taped and reeled Weight approx. Case material Dimensions - Maße [mm] Solder & assembly conditions IFAV = 1 A VF1 0.5 V Tjmax = 150°C VRRM = 20...100 V IFSM = 30/33 A Typische Anwendungen Ausgangsgleichrichtung in Gleichstromwandl.

SMS150 : SMS 120...SMS 1100 /5 Surface mount diode Schottky barrier rectifiers diodes 22 ( 22 () 22 (" 22 (4 22 ( 22 (! 22 ((  5    0  $ $ $ $ $ $ $ ;    6   - #;; #  ) " 4  ! ( 2-  6   - #;2 #  ) " 4  ! (   : - /= 7 4  18 7 ( * #8? # .4 .4 .4 .3 .3 .3! .3!      5  18 7 $ * 1; 7 $ * 1;; 7 $ *  $ $ $ $ $ $ $ SMS 120...SMS 1100 Forward Current: 1 A Reverse Voltage: 20 to 100 V Features                   !"#$ Mechanical Data       % &'$()*+  , -   .(  /     .

SMS1546-001 : These low cost, surface mountable plastic packaged silicon mixer Schottky diodes are designed for RF and microwave mixers and detectors.They include low barrier diodes and zero bias detectors, combining Alpha’s advanced semiconductor technology with low cost packaging techniques. All diodes are 100% DC tested and deliver tight parameter distribution, minimizing performance variability.They are available in SC70, SC-79, SOD-323, SOT-23 and SOT-143 packages.Wiring configurations include singles, common cathode, series pairs and unconnected pairs. Applications include low noise receivers used in high sensitivity ID tags, wireless systems, radio designs and may be used at frequencies to 10 GHz. .

SMS1546-005 : These low cost, surface mountable plastic packaged silicon mixer Schottky diodes are designed for RF and microwave mixers and detectors.They include low barrier diodes and zero bias detectors, combining Alpha’s advanced semiconductor technology with low cost packaging techniques. All diodes are 100% DC tested and deliver tight parameter distribution, minimizing performance variability.They are available in SC70, SC-79, SOD-323, SOT-23 and SOT-143 packages.Wiring configurations include singles, common cathode, series pairs and unconnected pairs. Applications include low noise receivers used in high sensitivity ID tags, wireless systems, radio designs and may be used at frequencies to 10 GHz. .

SMS1546-011 : These low cost, surface mountable plastic packaged silicon mixer Schottky diodes are designed for RF and microwave mixers and detectors.They include low barrier diodes and zero bias detectors, combining Alpha’s advanced semiconductor technology with low cost packaging techniques. All diodes are 100% DC tested and deliver tight parameter distribution, minimizing performance variability.They are available in SC70, SC-79, SOD-323, SOT-23 and SOT-143 packages.Wiring configurations include singles, common cathode, series pairs and unconnected pairs. Applications include low noise receivers used in high sensitivity ID tags, wireless systems, radio designs and may be used at frequencies to 10 GHz. .

SMS1546-015 : These low cost, surface mountable plastic packaged silicon mixer Schottky diodes are designed for RF and microwave mixers and detectors.They include low barrier diodes and zero bias detectors, combining Alpha’s advanced semiconductor technology with low cost packaging techniques. All diodes are 100% DC tested and deliver tight parameter distribution, minimizing performance variability.They are available in SC70, SC-79, SOD-323, SOT-23 and SOT-143 packages.Wiring configurations include singles, common cathode, series pairs and unconnected pairs. Applications include low noise receivers used in high sensitivity ID tags, wireless systems, radio designs and may be used at frequencies to 10 GHz. .

SMS15C : SMS15C TVS/ESD DIODE ARRAY AND LATCH-UP PROTECTION Features ● Ultra low leakage: nA level ● Operating voltage: 15V ● Low clamping voltage ● Complies with following standards: – IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV – IEC61000-4-4 (EFT) 40A (5/50ns) – IEC61000-4-5 (Lightning) 12A (8/20μs) ● RoHS Compliant Dimensions SOT-26 Applications ● USB 2.0 power and data line ● Set-top box and digital TV ● Digital video interface (DVI) ● Notebook Computers ● SIM Ports ● 10/100 Ethernet Pin Configuration Mechanical Characteristics ● Package: SOT-26 ● Lead Finish: Lead Free ● UL Flammability Classification Rating 94V-0 ● Quantity Per Reel:3,000pcs ● Reel Size.

SMS15C : The SMS series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect up to five lines. They are available with operating voltages of 5V, 12V, 15V and 24V. They are unidirectional devices and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large crosssectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage and no device degradation. The.

SMS15C : SMS05C, SMS12C, SMS15C, SMS24C ESD Protection Diode Array, 5-Line This 5−line surge protection array is designed for application requiring transient voltage protection capability. It is intended for use in over−transient voltage and ESD sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. This device features a monolithic common anode design which protects five independent lines in a single TSOP−6 package. Features • Protects up to 5 Lines in a Single TSOP−6 Package • Peak Power Dissipation − 350 W (8 20 ms Waveform) • ESD Rating of Class 3B (Exceeding 8.0 kV) per Human Body Model and Class C (Exceeding 400 V) per Machine .

SMS15C : This 6 pin 4 line bi-directional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 61000-4-2, electrical fast transients (EFT) per IEC 61000-4-4 and effects of secondary lighting. These arrays are used to protect 4 discrete lines utilizing pins (1,3,4,6) with a common (pin 5) configuration. The SMS03C thru SMS24C product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. These Transient Voltage Suppressor (TVS) diode arrays protect 3.0/3.3 volt components such as DRAM’s SRAM’s CMOS, HCMOS, HSIC, an.

SMS15P1 : The versatile “ SMS “ Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective interconnection techniques. www.DataSheet4U.com It is a range of multiway connectors using N° 16 TRIM TRIO .0625” (1.6mm) diameter contacts and available in 10 contact arrangements from 2 to 36 positions. Having no additional hardware, Panel receptacle connectors snap and lock into panel cutouts and cable plugs quick connect and disconnect with positive retention locks. Cable plug connectors also feature pinprotection skirts, positive polarisation and can be supplied with or without integrated strain relief hoods. Cable receptacle connect.

SMS15PDH1 : The versatile “ SMS “ Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective interconnection techniques. www.DataSheet4U.com It is a range of multiway connectors using N° 16 TRIM TRIO .0625” (1.6mm) diameter contacts and available in 10 contact arrangements from 2 to 36 positions. Having no additional hardware, Panel receptacle connectors snap and lock into panel cutouts and cable plugs quick connect and disconnect with positive retention locks. Cable plug connectors also feature pinprotection skirts, positive polarisation and can be supplied with or without integrated strain relief hoods. Cable receptacle connect.