SMCG60

SMCG6.0 : The SMC 5.0 through SMC 170A series of 1500 watt Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components. The gull-wing design (SMCG) in the DO-215AB package allows for visible solder connections. The J-bend design (SMCJ) in the DO-214AB package allows for greater PC board mounting density. Selections include unidirectional and bidirectional as well as RoHS compliant versions. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per IEC61000-4.

SMCG6.0 : DIGITRON SEMICONDUCTORS SMC SERIES TRANSIENT ABSORPTION ZENER DIODES 5.0 THROUGH 170.0 VOLTS, 1500 WATTS UNIDIRECTIONAL AND BIDIRECTIONAL CONSTRUCTION 1500 watts of peak power dissipation (10 x 1000µs) tclamping (0 volts to V(BR) min): less that 1 x 10-12 seconds Forward surge rating: 200 amps, 1/120 seconds @ 25°C(excluding bidirectional) Operating and storage temperature range: -65° to 150°C For bi-directional indicate a C or CA suffix after the part number (i.e. SMCJ5.0C or SMCJ5.0CA) Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. ELECTRICAL CHARACTERIS.

SMCG6.0 : Micro Electronic Instrument Inc. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCG AND SMCJ5.0 THRU 170CA FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
For surface mounted applications in order to optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance

   

 waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 volts to V(BR) for uni-directional and 5.0 ns for bi-directional types
For devices with V(BR) 10V, ID are typically less 

High temperature soldering gu.

SMCG6.0 : .

SMCG6.0A : The SMC 5.0 through SMC 170A series of 1500 watt Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components. The gull-wing design (SMCG) in the DO-215AB package allows for visible solder connections. The J-bend design (SMCJ) in the DO-214AB package allows for greater PC board mounting density. Selections include unidirectional and bidirectional as well as RoHS compliant versions. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per IEC61000-4.

SMCG6.0A : DIGITRON SEMICONDUCTORS SMC SERIES TRANSIENT ABSORPTION ZENER DIODES 5.0 THROUGH 170.0 VOLTS, 1500 WATTS UNIDIRECTIONAL AND BIDIRECTIONAL CONSTRUCTION 1500 watts of peak power dissipation (10 x 1000µs) tclamping (0 volts to V(BR) min): less that 1 x 10-12 seconds Forward surge rating: 200 amps, 1/120 seconds @ 25°C(excluding bidirectional) Operating and storage temperature range: -65° to 150°C For bi-directional indicate a C or CA suffix after the part number (i.e. SMCJ5.0C or SMCJ5.0CA) Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. ELECTRICAL CHARACTERIS.

SMCG6.0A : Micro Electronic Instrument Inc. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCG AND SMCJ5.0 THRU 170CA FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
For surface mounted applications in order to optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance

   

 waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 volts to V(BR) for uni-directional and 5.0 ns for bi-directional types
For devices with V(BR) 10V, ID are typically less 

High temperature soldering gu.

SMCG6.0A : .

SMCG6.0A : www.vishay.com SMCG5.0A thru SMCG188CA Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors DO-215AB (SMCG) PRIMARY CHARACTERISTICS VBR uni-directional 6.40 V to 231 V VBR bi-directional 6.40 V to 231 V VWM 5.0 V to 188 V PPPM 1500 W PD 6.5 W IFSM (uni-directional only) 200 A TJ max. 150 °C Polarity Uni-directional, bi-directional Package DO-215AB (SMCG) DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional devices use CA suffix (e.g. SMCG188CA). Electrical characteristics apply in both directions. FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-direc.

SMCG6.0A : Micro Electronic Instrument Inc. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCG AND SMCJ5.0 THRU 170CA FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
For surface mounted applications in order to optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance

   

 waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 volts to V(BR) for uni-directional and 5.0 ns for bi-directional types
For devices with V(BR) 10V, ID are typically less 

High temperature soldering gu.

SMCG6.0A-HR : The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation at (TFAi=g2.25)º(NCobtye 10/1000µs waveform 1), (Note 2) PPPM Power Dissipation on infinite heat sink at TA=50OC Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only Operating Junction and Storage Temperature Range PM(AV) IFSM VF TJ, TSTG Typical Thermal Resistanc.

SMCG6.0A-HRA : The SMCG-HRA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation at (TFAi=g2.25)º(NCobtye 10/1000µs waveform 1), (Note 2) PPPM Power Dissipation on infinite heat sink at TA=50OC Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only Operating Junction and Storage Temperature Range PM(AV) IFSM VF TJ, TSTG Typical Thermal Resistan.

SMCG6.0CA-HR : The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation at (TFAi=g2.25)º(NCobtye 10/1000µs waveform 1), (Note 2) PPPM Power Dissipation on infinite heat sink at TA=50OC Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only Operating Junction and Storage Temperature Range PM(AV) IFSM VF TJ, TSTG Typical Thermal Resistanc.

SMCG6.0CA-HRA : The SMCG-HRA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Peak Pulse Power Dissipation at (TFAi=g2.25)º(NCobtye 10/1000µs waveform 1), (Note 2) PPPM Power Dissipation on infinite heat sink at TA=50OC Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only Operating Junction and Storage Temperature Range PM(AV) IFSM VF TJ, TSTG Typical Thermal Resistan.

SMCG6.5 : The SMC 5.0 through SMC 170A series of 1500 watt Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components. The gull-wing design (SMCG) in the DO-215AB package allows for visible solder connections. The J-bend design (SMCJ) in the DO-214AB package allows for greater PC board mounting density. Selections include unidirectional and bidirectional as well as RoHS compliant versions. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per IEC61000-4.

SMCG6.5 : DIGITRON SEMICONDUCTORS SMC SERIES TRANSIENT ABSORPTION ZENER DIODES 5.0 THROUGH 170.0 VOLTS, 1500 WATTS UNIDIRECTIONAL AND BIDIRECTIONAL CONSTRUCTION 1500 watts of peak power dissipation (10 x 1000µs) tclamping (0 volts to V(BR) min): less that 1 x 10-12 seconds Forward surge rating: 200 amps, 1/120 seconds @ 25°C(excluding bidirectional) Operating and storage temperature range: -65° to 150°C For bi-directional indicate a C or CA suffix after the part number (i.e. SMCJ5.0C or SMCJ5.0CA) Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. ELECTRICAL CHARACTERIS.

SMCG6.5 : Micro Electronic Instrument Inc. SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMCG AND SMCJ5.0 THRU 170CA FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
For surface mounted applications in order to optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance

   

 waveform, repetition rate (duty cycle): 0.01%
Excellent clamping capability
Fast response time: typically less than 1.0ps from 0 volts to V(BR) for uni-directional and 5.0 ns for bi-directional types
For devices with V(BR) 10V, ID are typically less 

High temperature soldering gu.