SMDJ9.0

SMDJ9.0 : SMDJ5.0A(CA) - SMDJ170A(CA) SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE VOLTAGE RANGE: 5.0 - 17 0V POWER: 3000Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Case Material has UL Flammability Classification Rating 94V-O Mechanical Data ! Case: SMC/DO-214AB, Molded Plastic ! Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 ! Polarity: Cathode Band or Cathode Notch ! Marking: Type Number ! Weight: 0.21 grams (approx.) SMC/DO-214AB B Dim Min Max A 5.59 6.22 A C B 6.60 7.11 C 2.75 3.18 D 0.15 0.31 D E 7.75 8.13 G 0.10 0.20 J H 0.76 1.52 HG E J 2.00 2.62 .

SMDJ9.0 : Transient Voltage Suppressors DO-214AB/SMC Package SMDJ Series FEATURE  Breakdown Voltage from 5.0 to 440V  3000W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle): 0.01%  Glass passivated chip  Excellent clamping capability, fast response time.  Low incremental surge resistance, Low profile package  Terminal: Solderable per MIL-STD-750, Method 2026  Epoxy: UL 94V-0 rate flame retardant  UL/cUL safety approved: certification No: E223045 ELECTRICAL CHARACTERISTICS Parameter Symbols Value Peak power dissipation with a 10/1000µs waveform(1) PPP 3000 Peak pulse current with a 10/1000μs waveform(1) IPP See Next Table Power dissipation on infini.

SMDJ9.0 : Tel: +86 (0)769 8252 3211 Skype: topdiode Email: info@topdiode.com Website: www.topdiode.com Surface Mount TVS SMDJ5.0--SMDJ170CA ■ 3000 Watt Peak Power ■ Dimension ■ Specification SMD (DO-214AB) Dim Millimeters Inches Min Max Min Max A 6.60 7.11 0.260 0.280 B 5.59 6.22 0.220 0.245 C 2.90 3.20 0.114 0.126 D 0.125 0.305 0.006 0.012 E 7.75 8.13 0.305 0.320 F ---- 0.203 ---- 0.008 G 2.06 2.62 0.079 0.103 H 0.76 1.52 0.030 0.060 Type Number (Uni) SMDJ5.0 SMDJ5.0A SMDJ6.0 SMDJ6.0A (Bi) SMDJ5.0C SMDJ5.0CA SMDJ6.0C SMDJ6.0CA Marking (Uni) HDD HDE HDF HDG (Bi) IDD IDE IDF IDG Reverse Stand-Off Voltage Breakdown Voltage Min. @IT Breakdown Voltage Max. @ IT Test Current VRMW(.

SMDJ9.0 : The SMDJ Series are designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Unidirectional Bidirectional Feature Applications  For surface mounted application to optimize board space  Low profile package  Built-in strain relief  Typical maximum temperature coefficient TVS device are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer industrial and consumer electronic application ᇞVBR=0.1%×VBR@25℃×ᇞT  Glass passivated chip junction  3000W peak pulse power capability at 10×1000μs waveform, repetition rate(duty cycles):0.01%  Fast re.

SMDJ9.0 : SMDJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS VOLTAGE RANGE FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V 5.0 to 440 Volts 3000 Watts Peak Power DO-214AB .124(3.15) .108(2.75) .245(6.22) .220(5.59) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end except Bidirectional * Mounting position: Any .103(2.62) .079(2.00) .050(1.27) .030(0.76) .280(7.11) .260(6.60) .012(0.31).

SMDJ9.0 : SMDJ5.0 thru SMDJ44 0CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR REVERSE VOLTAGE 6.8 to 520 Volts PEAK PULSE POWER 3000 WATTS FEATURES Glass passivated chip 3000 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 % Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time SMC/DO-214AB .108(2.75) .128(3.25) .220(5.59) .245(6.22) .260(6.60) .280(7.11) .006(.152) .012(.305) .079(2.00) .103(2.62) .030(0.76) .050(1.27) .002(.051) .008(.203) .305(7.75) .320(8.13) Dimensions in inches and (millimeters) MECHANICAL DATA Case Molded plastic Epoxy UL 94V-0 rate flame retardant Lead: Solderable per MIL-STD-750, Meth.

SMDJ9.0 : The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic p.

SMDJ9.0A : TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. FEATURES:  Glass passivated or planar junction.  Excellent clamping capability.  Repetition rate (duty cycle): 0.01%.  Typical IR less than 1μA above 10V.  Low profile package and low inductance.  3000W peak pulse power capability at 10×1000μs waveform.  Fast response time: typically less than 1.0ps from 0V to VBR min.  High temperature soldering: 260℃/10s at terminals.  Plastic package has Underwriters Laboratory Flammability 94V-0.  For surface mounted applications in order to .

SMDJ9.0A : SMDJ5.0A(CA) - SMDJ170A(CA) SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE VOLTAGE RANGE: 5.0 - 17 0V POWER: 3000Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Case Material has UL Flammability Classification Rating 94V-O Mechanical Data ! Case: SMC/DO-214AB, Molded Plastic ! Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 ! Polarity: Cathode Band or Cathode Notch ! Marking: Type Number ! Weight: 0.21 grams (approx.) SMC/DO-214AB B Dim Min Max A 5.59 6.22 A C B 6.60 7.11 C 2.75 3.18 D 0.15 0.31 D E 7.75 8.13 G 0.10 0.20 J H 0.76 1.52 HG E J 2.00 2.62 .

SMDJ9.0A : The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic p.

SMDJ9.0A : Transient Voltage Suppressors DO-214AB/SMC Package SMDJ Series FEATURE  Breakdown Voltage from 5.0 to 440V  3000W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle): 0.01%  Glass passivated chip  Excellent clamping capability, fast response time.  Low incremental surge resistance, Low profile package  Terminal: Solderable per MIL-STD-750, Method 2026  Epoxy: UL 94V-0 rate flame retardant  UL/cUL safety approved: certification No: E223045 ELECTRICAL CHARACTERISTICS Parameter Symbols Value Peak power dissipation with a 10/1000µs waveform(1) PPP 3000 Peak pulse current with a 10/1000μs waveform(1) IPP See Next Table Power dissipation on infini.

SMDJ9.0A : Production specification TRANSIENT VOLTAGE SUPPRESSOR SMDJ5.0A--SMDJ170CA FEATURES z Halogen-Free z ROHS compliant z Low profile package z For surface mounted applications in order to optimize board space z Typical maximum temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT z Glass passivated chip junction z 3000W peak pulse power capability at 10×1000μs waveform, repetition rate (duty cycles):0.01% z Fast response time：typically less than 1.0ps from 0V to BV min z Excellent clamping capability z Low incremental surge resistance z Typical IR less than 2μA above 12V z soldering guaranteed: z High Temperature 260°C/40 seconds at terminals z Plastic package has Underwriters Lab.

SMDJ9.0A : Tel: +86 (0)769 8252 3211 Skype: topdiode Email: info@topdiode.com Website: www.topdiode.com Surface Mount TVS SMDJ5.0--SMDJ170CA ■ 3000 Watt Peak Power ■ Dimension ■ Specification SMD (DO-214AB) Dim Millimeters Inches Min Max Min Max A 6.60 7.11 0.260 0.280 B 5.59 6.22 0.220 0.245 C 2.90 3.20 0.114 0.126 D 0.125 0.305 0.006 0.012 E 7.75 8.13 0.305 0.320 F ---- 0.203 ---- 0.008 G 2.06 2.62 0.079 0.103 H 0.76 1.52 0.030 0.060 Type Number (Uni) SMDJ5.0 SMDJ5.0A SMDJ6.0 SMDJ6.0A (Bi) SMDJ5.0C SMDJ5.0CA SMDJ6.0C SMDJ6.0CA Marking (Uni) HDD HDE HDF HDG (Bi) IDD IDE IDF IDG Reverse Stand-Off Voltage Breakdown Voltage Min. @IT Breakdown Voltage Max. @ IT Test Current VRMW(.

SMDJ9.0A : The SMDJ Series are designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Unidirectional Bidirectional Feature Applications  For surface mounted application to optimize board space  Low profile package  Built-in strain relief  Typical maximum temperature coefficient TVS device are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer industrial and consumer electronic application ᇞVBR=0.1%×VBR@25℃×ᇞT  Glass passivated chip junction  3000W peak pulse power capability at 10×1000μs waveform, repetition rate(duty cycles):0.01%  Fast re.

SMDJ9.0A : SMDJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS VOLTAGE RANGE FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V 5.0 to 440 Volts 3000 Watts Peak Power DO-214AB .124(3.15) .108(2.75) .245(6.22) .220(5.59) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end except Bidirectional * Mounting position: Any .103(2.62) .079(2.00) .050(1.27) .030(0.76) .280(7.11) .260(6.60) .012(0.31).

SMDJ9.0A : ZEN ELECTRONIC TRANSIENT VOLTAGE SUPPRESSOR PA RT  N O.  3 . 0 S M D J 5 . 0 A ( C A ) - 3 . 0 S M D J 1 7 0 A ( C A ) Surface Mount Unidirectional and Bidirectional Transient Voltage Suppressors Features  Voltage Range 5.0V - 170V  3000W Peak Pulse Power Dissipation  For surface mounted applications  Reliable low cost construction utilizing molded plastic technique  Response Time is Typically 1 ns  Uni-direction, less than 5.0ns for Bi-direction, form 0 Volts to BV min  ESD Rating of above 16 kV per Human Body Model  ESD Rating of above 30 kV (Contact Discharge) per IEC61000−4−2  EFT (Electrical Fast Transients) Rating of 40 A per IEC61000−4−4  Plastic material has UL flamm.