P4SMA24CA

P4SMA24C : P4SMA6V8.... P4SMA440A P4SMA6V8C.. P4SMA260CA 400 W Surface Mount Transient Voltage Suppressor DO-214AC (SMA) Voltage 6.8 V to 440 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms R FEATURES • Low profile package • Ideal for automated placement • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Available in uni-directional and bi-directional • Solder dip 260ºC, 10s • Component in accordance to RoHS 2011/65/EU and WEEE 2002/96/EC • Meets MSL level 1, per J-STD-020, LF maximum peak of 260º C • Halogen-free available according to IEC 61249-.

P4SMA24C : P4SMA6.8~P4SMA250CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 400 Watt BREAK DOWN VOLTAGE 6.8 to 250 Volt FEATURES • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS2.0 (2011/65/EU & 2015/865/EU directive) • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD.

P4SMA24C : Production specification TRANSIENT VOLTAGE SUPPRESSOR FEATURES z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10×1000us waveform, Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time：Typically less then 1.0ps from 0 volts to BV min. z Typical IR less then 1 μΑ above 10V z High temperature soldering guaranteed：250℃/10 seconds at terminals. MECHANICAL DATA z Case: Molded plastic z Epoxy: UL94V-0 rate flame retardant z Lead: MIL-STD- 202E, Method 208 guaranteed z Polarity: olor band denotes cathode end z Packaging:12mm tape per EIA STD RS-481 z Mounting position: Any P.

P4SMA24C : E-DA SEMICONDUCTOR RoHS Compliant Product P4SMA6.8-P4SMA550A TRANSIENT VOLTAGE SUPPRESSOR BREAK DOWN VOLTAGE 6.8 to 550 Volt POWER 400 Watt 0.062(1.60) 0.047(1.20) 0.114(2.90) 0.098(2.50) 0.181(4.60) 0.157(4.00) FEATURES   Green • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals 0.012(0.305) 0.006(0.152) 0.060(1.52) 0.030(0.76) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plat.

P4SMA24C : P4SMA6.8A(CA) - P4SMA440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 6.8 - 440 V POWER: 400Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Material: UL Flammability Classification Rating 94V-0 Mechanical Data ! Case: SMA, Transfer Molded Epoxy ! Terminals: Solderable per MIL-STD-202, Method 208 ! Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) ! Marking: Date Code and Marking Code See Page 2 ! Weight: 0.064 grams (approx.) B A J H G E SMA(DO-214AC) Dim Min Max C A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0..

P4SMA24C : Features * For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at terminals * Plastic material used carries underwriters laboratory flammability classifications 94V-0 P4SMA6.8A THRU P4SMA550A Surface Mount Transient Voltage Suppressors Diodes Package Outline Dimensions in inches (millimeters) SMA： Mechanical Data * Case: Molded plastic * Terminals: Matte tin plated leads, solderable per JESD22-B102 * Polarity: Indicated by cathode band * Standard Packaging: 12mm tape per EIA S.

P4SMA24CA : P4SMA6V8.... P4SMA440A P4SMA6V8C.. P4SMA260CA 400 W Surface Mount Transient Voltage Suppressor DO-214AC (SMA) Voltage 6.8 V to 440 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms R FEATURES • Low profile package • Ideal for automated placement • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Available in uni-directional and bi-directional • Solder dip 260ºC, 10s • Component in accordance to RoHS 2011/65/EU and WEEE 2002/96/EC • Meets MSL level 1, per J-STD-020, LF maximum peak of 260º C • Halogen-free available according to IEC 61249-.

P4SMA24CA : P4SMA6.8~P4SMA250CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR POWER 400 Watt BREAK DOWN VOLTAGE 6.8 to 250 Volt FEATURES • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals • ESD IEC-61000-4-2 Air + 30kV, Contact + 30kV • Lead free in compliance with EU RoHS2.0 (2011/65/EU & 2015/865/EU directive) • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plated,solderable per MIL-STD.

P4SMA24CA : 400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA550CA 400W Surface Mount Transient Voltage Suppressor SMA Features z Breakdown voltage from 6.8 to 550 volts z Low inductance, excellent clamping capability z Repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to VBR z For surface mounted applications to optimize board space z Typical IR less than 1µA above 12V z High temperature soldering guaranteed:250°C/10 seconds at terminals z This series (P4SMA6.8A/CA to P4SMA440A/CA) is UL recognized under component index. File number E315008 z RoHS Compliant and Halogen Free Mechanical Data Case: Epoxy: Terminals: Polarity: Mounting position: We.

P4SMA24CA : The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ■ 400W peak pulse power ■ 260oC/40sec change to capability at 10/1000µs 260oC/30sec waveform, repetition rate (duty cycles):0.01% ■ VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature ■ Excellent clamping capability Coefficient, typical value is ■ Typical IR less than 1μA when 0.1%) VBR min12V ■ Surface mount footprint for compact PCB layout ■ Low profile package ■ UL Recognized epoxy meeting flammability classification V-0 change to Plastic package is flammability rated V-0 per UL-94. ■ Typical failure.

P4SMA24CA : Production specification TRANSIENT VOLTAGE SUPPRESSOR FEATURES z Plastic package has Underwriters Laboratory Flammability Classification 94V-0 z Glass passivated junction z 400 Wsurge capability at10×1000us waveform, Duty cycle:0.01% z Excellent clamping capability z Low zener impedance z Fast response time：Typically less then 1.0ps from 0 volts to BV min. z Typical IR less then 1 μΑ above 10V z High temperature soldering guaranteed：250℃/10 seconds at terminals. MECHANICAL DATA z Case: Molded plastic z Epoxy: UL94V-0 rate flame retardant z Lead: MIL-STD- 202E, Method 208 guaranteed z Polarity: olor band denotes cathode end z Packaging:12mm tape per EIA STD RS-481 z Mounting position: Any P.

P4SMA24CA : E-DA SEMICONDUCTOR RoHS Compliant Product P4SMA6.8-P4SMA550A TRANSIENT VOLTAGE SUPPRESSOR BREAK DOWN VOLTAGE 6.8 to 550 Volt POWER 400 Watt 0.062(1.60) 0.047(1.20) 0.114(2.90) 0.098(2.50) 0.181(4.60) 0.157(4.00) FEATURES   Green • For surface mounted applications in order to optimize board space • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • High temperature soldering : 260°C /10 seconds at terminals 0.012(0.305) 0.006(0.152) 0.060(1.52) 0.030(0.76) 0.008(0.203) 0.002(0.051) 0.208(5.28) 0.188(4.80) MECHANICAL DATA • Case: JEDEC DO-214AC,Molded plastic over passivated junction. • Terminals: Solder plat.

P4SMA24CA : P4SMA6.8A(CA) - P4SMA440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 6.8 - 440 V POWER: 400Wa t t s Features ! Glass Passivated Die Construction ! Uni- and Bi-Directional Versions Available ! Excellent Clamping Capability ! Fast Response Time ! Plastic Material: UL Flammability Classification Rating 94V-0 Mechanical Data ! Case: SMA, Transfer Molded Epoxy ! Terminals: Solderable per MIL-STD-202, Method 208 ! Polarity Indicator: Cathode Band (Note: Bi-directional devices have no polarity indicator.) ! Marking: Date Code and Marking Code See Page 2 ! Weight: 0.064 grams (approx.) B A J H G E SMA(DO-214AC) Dim Min Max C A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D D 0.15 0..

P4SMA24CA : Features * For surface mounted application * Low profile package * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at terminals * Plastic material used carries underwriters laboratory flammability classifications 94V-0 P4SMA6.8A THRU P4SMA550A Surface Mount Transient Voltage Suppressors Diodes Package Outline Dimensions in inches (millimeters) SMA： Mechanical Data * Case: Molded plastic * Terminals: Matte tin plated leads, solderable per JESD22-B102 * Polarity: Indicated by cathode band * Standard Packaging: 12mm tape per EIA S.

P4SMA24CA : SMD Transient Voltage Suppressor Chip Integration Technology Corporation P4SMA Series 400W Surface Mount Transient Voltage Suppressors VOLTAGE : 6.8 TO 550Volts Features • 400W peak pulse power capability with a 10/1000uS waveform, repetition rate (duty cycle): 0.01%. • Excellent clamping capability. • Low incremental surge resistance. • Suffix "G" indicates Halogen-free part, ex.P4SMA6.8(C)AG. • Glass passivated chip junction • Lead-free parts meet environmental standards of MIL-STD-19500 /228 Mechanical data • Epoxy:UL94-V0 rated flame retardant • Case : Molded plastic, DO-214AC / SMA • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity : Indicated by cathode .

P4SMA24CA : *RoHS COMPLIANT Features n RoHS compliant* and halogen free** n Surface Mount SMA package n Breakdown Voltage: 6.8 to 550 volts n Peak Pulse Power: 400 watts n Typical temperature coefficient: ∆VBR = 0.1 % x VBR @ 25 °C x ∆T Applications n IEC 61000-4-2 ESD (Min. Level 4) n IEC 61000-4-4 EFT n IEC 61000-4-5 Surge P4SMA Transient Voltage Suppressor Diode Series LEAD FREE RoHSV ECROSLIMEOPALNIDS A FANRTRE*EE General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection ap.