5KP140C

5KP140 : The 5KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

5KP140 : The 5KP Series, are discrete 5,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 5KP series is available in voltages ranging from 5V to 440V with 5 percent and 5 and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatiable with IEC 61000-4-5 (Surge) requirements. AXIAL LEAD PACKAGE FEATURES • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(Line- Ground), L4(Line-Line) & L1 (Power) • 5,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bid.

5KP140 : .

5KP140A : The 5KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

5KP140A : The 5KP Series, are discrete 5,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 5KP series is available in voltages ranging from 5V to 440V with 5 percent and 5 and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatiable with IEC 61000-4-5 (Surge) requirements. AXIAL LEAD PACKAGE FEATURES • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(Line- Ground), L4(Line-Line) & L1 (Power) • 5,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bid.

5KP140A : 5KP SERIES Transient Voltage Suppressors(5000W) 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) .360 (9.1) .340 (8.6) 1.0 (25.4) MIN. .360 (9.1) DIA. .340 (8.6) R6 Dimensions in inches and (millimeters) Ordering Information Part Number Compound 5KP SERIES General 5KP SERIES-H Halogen Free PRIMARY CHARACTERISTICS VBR 5~190V PPPM 5000W PD 8W TJ max 150°C Features ‧Constructed with Glass Passivated Die ‧5000W peak pulse power Dissipation ‧Excellent clamping capability ‧Uni and Bidirectional unit ‧Very fast response time ‧Component in accordance to RoHS 2002/95/EC Mechanical Data ‧Cases:R6 ‧Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 ‧Terminals: Le.

5KP140A : .

5KP140A-G : 5000W Transient Voltage Suppressor 5KP-G Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Features - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. - UL recognized file # E349157 R - Range: 5KP5.0(C)A thru. 5KP190(C)A Mechanical Data -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any R-6 1.0(25.4) MIN. 0.052(1.32) 0.048(1.22) DIA..

5KP140A-HF : 5000W Transient Voltage Suppressor 5KP-HF Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. - UL recognized file # E349157 R - Range: 5KP5.0(C)A thru. 5KP190(C)A 5KP5.0(C)A-HF Mechanical Data -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any R-6 1.0(25.4) MIN. 0.

5KP140C : The 5KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

5KP140CA : The 5KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin.

5KP140CA : 5KP SERIES Transient Voltage Suppressors(5000W) 1.0 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) .360 (9.1) .340 (8.6) 1.0 (25.4) MIN. .360 (9.1) DIA. .340 (8.6) R6 Dimensions in inches and (millimeters) Ordering Information Part Number Compound 5KP SERIES General 5KP SERIES-H Halogen Free PRIMARY CHARACTERISTICS VBR 5~190V PPPM 5000W PD 8W TJ max 150°C Features ‧Constructed with Glass Passivated Die ‧5000W peak pulse power Dissipation ‧Excellent clamping capability ‧Uni and Bidirectional unit ‧Very fast response time ‧Component in accordance to RoHS 2002/95/EC Mechanical Data ‧Cases:R6 ‧Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 ‧Terminals: Le.

5KP140CA : .

5KP140CA-G : 5000W Transient Voltage Suppressor 5KP-G Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Features - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. - UL recognized file # E349157 R - Range: 5KP5.0(C)A thru. 5KP190(C)A Mechanical Data -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any R-6 1.0(25.4) MIN. 0.052(1.32) 0.048(1.22) DIA..

5KP140CA-HF : 5000W Transient Voltage Suppressor 5KP-HF Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. - UL recognized file # E349157 R - Range: 5KP5.0(C)A thru. 5KP190(C)A 5KP5.0(C)A-HF Mechanical Data -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any R-6 1.0(25.4) MIN. 0.