15KP24A

15KP24 : .

15KP24 : 15KP12A(CA) - 15KP240A(CA) AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DIODE VOLTAGE RANGE: 12 - 240V POWER: 15000Wa t t s Features ! Glass passivated junction ! 15000W Peak Pulse Power capability on 10/1000 |ìs waveform ! Excellent clamping capability ! Repetition rate (duty cycle):0.05% ! Low incremental surge resistance ! Fast response time: typically less 0 volts to BV ! Typical Id less than 1µA above 10V than 1.0 ps from ! High temperature soldering guaranteed: 265° C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension Mechanical Data ! Case: JEDEC R-6 Molded Plastic ! Terminals: Axial Leads, Solderable per MIL-STD-750, Method 2026 ! Polarity: Cathode Band or Cathode Notch ! Weig.

15KP24 : 15KP SERIES VR : 12 - 400Volts PPK : 15,000 Watts FEATURES : * Glass passivated junction chip * Excellent Clamping Capability * Fast Response Time * Low Zener Impedance * Low Leakage Current * Fast Response Time : typically less than 1.0ps from 0 volt to BV, Bidirectional less than 10ns * High temperature soldering guaranteed : 265°C/10 second 0.375",(9.5mm) lead leagth. * AEC-Q101 qualified * Pb / RoHS Free MECHANICAL DATA * Case : Void-free molded plastic body * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 2.1 grams MAXIMUM RATINGS (Ta = 25C) Ratin.

15KP24 : APPEARANCE These Microsemi 15 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is available in 17 to 280 volt standoff voltages (VWM) in both unidirectional and bi-directional offered in two different package designs for axial and radial configurations. Microsemi also offers numerous other TVS products to meet higher or lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://w.

15KP24 : The 15KP Series, are discrete 15,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 15KP series is available in voltages ranging from 17V to 280V with 5 percent and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatible with IEC 61000-4-5 (Surge) requirements. THRU-HOLE package Features • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(LineGround), L4(Line-Line) & L1 (Power) • 15,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bidirectional.

15KP24 : 15KP series VOLTAGE RANGE 17 - 240 VOLTS 15000 WATT PEAK PULSE POWER FEATURES G Glass passivated junction G Excellent clamping capability G Fast response time G Low zener impedance G 100% surge tested G UL recognised MAXIMUM RATING G Peak Pulse Power (Ppk): 15000 Watts (10 x 1000µs)@25°C (see diagram on page 3 for wave form) G 7 watt steady state G Response time: 1 x 10-12 seconds (theoretical) G Forward surge rating: 200 Amps, 8.3ms half sine wave, (uni-directional devices only) G Operating & storage temperature: -55°C to +150°C MECHANICAL CHARACTERISTICS G Case: JEDEC R6; Moulded plastic over glass passivated junction G Terminals: Axial leads, solderable per MIL-STD-202 Method 208 G Solder.

15KP24 : 15KP17-15KP280 High-reliability discrete products and engineering services since 1977 15000W TRANSIENT VOLTAGE SUPPRESSOR FEATURES  Axial and radial available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.  Available in both axial leaded and radial packages (“R” prefix for radial packages)  Selections for 170 to 280 volts standoff voltage  Suppresses transients up to 15000 watts @ 10/10000µa and 100000 watts @ 8/20µs  Fast response MAXIMUM RATINGS Rating Peak Pulse Power Dissipation @ 25°C Impulse Repetition Rate (Duty factor) tclamping (0 .

15KP240 : .

15KP240 : 15KP SERIES VR : 12 - 400Volts PPK : 15,000 Watts FEATURES : * Glass passivated junction chip * Excellent Clamping Capability * Fast Response Time * Low Zener Impedance * Low Leakage Current * Fast Response Time : typically less than 1.0ps from 0 volt to BV, Bidirectional less than 10ns * High temperature soldering guaranteed : 265°C/10 second 0.375",(9.5mm) lead leagth. * AEC-Q101 qualified * Pb / RoHS Free MECHANICAL DATA * Case : Void-free molded plastic body * Epoxy : UL94V-0 rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 2.1 grams MAXIMUM RATINGS (Ta = 25C) Ratin.

15KP240 : 15KP12A(CA) - 15KP240A(CA) AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR DIODE VOLTAGE RANGE: 12 - 240V POWER: 15000Wa t t s Features ! Glass passivated junction ! 15000W Peak Pulse Power capability on 10/1000 |ìs waveform ! Excellent clamping capability ! Repetition rate (duty cycle):0.05% ! Low incremental surge resistance ! Fast response time: typically less 0 volts to BV ! Typical Id less than 1µA above 10V than 1.0 ps from ! High temperature soldering guaranteed: 265° C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension Mechanical Data ! Case: JEDEC R-6 Molded Plastic ! Terminals: Axial Leads, Solderable per MIL-STD-750, Method 2026 ! Polarity: Cathode Band or Cathode Notch ! Weig.

15KP240 : APPEARANCE These Microsemi 15 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is available in 17 to 280 volt standoff voltages (VWM) in both unidirectional and bi-directional offered in two different package designs for axial and radial configurations. Microsemi also offers numerous other TVS products to meet higher or lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://w.

15KP240 : The 15KP Series, are discrete 15,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The 15KP series is available in voltages ranging from 17V to 280V with 5 percent and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatible with IEC 61000-4-5 (Surge) requirements. THRU-HOLE package Features • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(LineGround), L4(Line-Line) & L1 (Power) • 15,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bidirectional.

15KP240 : 15KP17-15KP280 High-reliability discrete products and engineering services since 1977 15000W TRANSIENT VOLTAGE SUPPRESSOR FEATURES  Axial and radial available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.  Available in both axial leaded and radial packages (“R” prefix for radial packages)  Selections for 170 to 280 volts standoff voltage  Suppresses transients up to 15000 watts @ 10/10000µa and 100000 watts @ 8/20µs  Fast response MAXIMUM RATINGS Rating Peak Pulse Power Dissipation @ 25°C Impulse Repetition Rate (Duty factor) tclamping (0 .

15KP240A : 15KP17(C)A THRU 15KP280(C)A E480232 Features • Fast Response Time • Glass Passivated Junction and Plastic Package Devices • Low Incremental Surge Resistance • High Temperature Soldering Guaranteed • Halogen Free Available Upon Request By Adding Suffix "-HF" • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates RoHS Compliant. See Ordering Information) • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i.e.15KP17CA for 5% Tolerance Mechanical Data • Polarity :Color Band Denotes Cathodes Except Bipolar • Weight: 0.07 ounce, 2.5 grams • Terminals: Plated Axial leads, Solderable Per MIL-STD-.

15KP240A : ® WON-TOP ELECTRONICS Features  Glass Passivated Die Construction  15000W Peak Pulse Power Dissipation  17V – 280V Standoff Voltage  Uni- and Bi-Directional Versions Available  Excellent Clamping Voltage  Typical Response Time 1nS  Plastic Case Material has UL Flammability Classification Rating 94V-0 Mechanical Data  Case: P-600, Molded Plastic  Terminals: Plated Leads Solderable per MIL-STD-202, Method 208  Polarity: Cathode Band Except Bi-Directional  Weight: 2.10 grams (approx.)  Mounting Position: Any  Marking: Type Number  Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 5 15KP SERIES 15000W TRANSIENT VOLTAGE SUPPRESSOR Pb ABA D P-600 .

15KP240A : Features 15KP17(C)A THRU 15KP280(C)A 15000 Watts Transient Voltage Suppressors * 15000 watts peak pulse power capability on 10/1000us waveform * Glass passivated junction and plastic package devices * Low incremental surge resistance * High temperature soldering guaranteed * Fast response time: typically less than 1.0ps from 0 Volts to BV, bidirectonal less than 10ns C ABA D Cathode Mark P600 INCHES MM DIM MIN MAX MIN MAX A 1.000 --- 25.40 --- B 0.339 0.358 8.60 9.10 C 0.047 0.051 1.20 1.30 D 0.339 0.358 8.60 9.10 Mechanical Data * Polarity: Color band denotes cathode except bipolar * Weight: 0.07 ounce, 2.5 grams * Terminals: plated Axial leads, solderable per MIL-.

15KP240A : .