Part Number
|
ADXL05 |
Manufacturer
|
Analog Devices |
Description
|
+-1 g to +-5 g Single Chip Accelerometer with Signal Conditioning |
Published
|
Mar 23, 2005 |
Detailed Description
|
a
؎1 g to ؎5 g Single Chip Accelerometer with Signal Conditioning ADXL05*
floor is 500 µg/√Hz, (12× less than the ADXL5...
|
Datasheet
|
ADXL05
|
Overview
a
؎1 g to ؎5 g Single Chip Accelerometer with Signal Conditioning ADXL05*
floor is 500 µg/√Hz, (12× less than the ADXL50), allowing signals below 5 milli-g to be resolved.
The ADXL05 is a force balanced capacitive accelerometer with the capability to measure both ac accelerations (typical of vibration) or dc accelerations (such as inertial force or gravity).
Three external capacitors and a +5 volt regulated power supply are all that is required to measure accelerations up to ± 5 g.
Three resistors are used to configure the output buffer amplifier to set scale factors from 200 mV/g to 1 V/g.
External capacitors may be added to the resistor network to provide 1 or 2 poles of filtering.
No add...
Similar Datasheet