Part Number | LPC845 |
Manufacturer | NXP |
Title | 32-bit Arm Cortex-M0+ microcontroller |
Description | The LPC84x are an Arm Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC84x support up to 64 KB of... |
Features |
and benefits
System: Arm Cortex-M0+ processor (revision r0p1), running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port. Arm Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC). System tick timer. AHB multilayer matrix. Serial Wire De... |
File Size | 3.88MB |
Datasheet |
|
LPC844 : The LPC84x are an Arm Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC84x support up to 64 KB of flash memory and 16 KB of SRAM. The peripheral complement of the LPC84x includes a CRC engine, four I2C-bus interfaces, up to five USARTs, up to two SPI interfaces, Capacitive Touch Interface, one multi-rate timer, self-wake-up timer, SCTimer/PWM, one general purpose 32-bit counter/timer, a DMA, one 12-bit ADC, two 10-bit DACs, one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 54 general-purpose I/O pins. For additional documentation related to the LPC84x parts, see Section 18..
LPC844 : The LPC84x are an Arm Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC84x support up to 64 KB of flash memory and 16 KB of SRAM. The peripheral complement of the LPC84x includes a CRC engine, four I2C-bus interfaces, up to five USARTs, up to two SPI interfaces, Capacitive Touch Interface, one multi-rate timer, self-wake-up timer, SCTimer/PWM, one general purpose 32-bit counter/timer, a DMA, one 12-bit ADC, two 10-bit DACs, one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 54 general-purpose I/O pins. For additional documentation related to the LPC84x parts, see Section 18..