| Part Number | SMLJ58A |
| Manufacturer | DIGITRON |
| Title | TRANSIENT ABSORPTION ZENER DIODES |
| Description | SML SERIES High-reliability discrete products and engineering services since 1977 TRANSIENT ABSORPTION ZENER DIODES FEATURES Available as “HR... |
| Features |
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. For bi-directional indicate a C or CA suffix after the part number (i.e. SMLJ5.0C or SMLJ5.0C... |
| File Size | 472.89KB |
| Datasheet |
|
SMLJ58 : APPEARANCE The SMLJ5.0-170A or SMLG5.0-170A series of 3000 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMLJ) with the DO-214AB package for greater PC board mounting density or in a Gull-wing design (SMLG) in the DO-215AB for visible solder connections. Selections include unidirectional and bidirectional. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per I.
SMLJ58 : MCC Features l l l l l l l l l l l omponents 21201 Itasca Street Chatsworth !"# $ % !"# SMLJ5.0 THRU SMLJ170CA Transient Voltage Suppressor 5.0 to 170 Volts 3000 Watt DO-214AB (SMLJ) (LEAD FRAME) G For surface mount application in order to optimize board space Low inductance Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Repetition Rate( duty cycle): 0.5% Fast response time: typical less than 1ps from 0V to BV min Typical ID less than 1uA above 10V High temperature soldering: 250 C/10 seconds at terminals Plastic package has Underwrites Laboratory Flammability Classification 9.
SMLJ58A : APPEARANCE The SMLJ5.0-170A or SMLG5.0-170A series of 3000 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMLJ) with the DO-214AB package for greater PC board mounting density or in a Gull-wing design (SMLG) in the DO-215AB for visible solder connections. Selections include unidirectional and bidirectional. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per I.
SMLJ58A : UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) PPK IFSM 3000 300 Steady State Power Dissipation @ TL = 75 °C PM(AV) 5.0 Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) SMLJ5.0A ~ SMLJ90A SMLJ100A ~ SMLJ170A VF 3.5 5.0 Operating Temperature Range TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating.
SMLJ58A : MCC Features l l l l l l l l l l l omponents 21201 Itasca Street Chatsworth !"# $ % !"# SMLJ5.0 THRU SMLJ170CA Transient Voltage Suppressor 5.0 to 170 Volts 3000 Watt DO-214AB (SMLJ) (LEAD FRAME) G For surface mount application in order to optimize board space Low inductance Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Repetition Rate( duty cycle): 0.5% Fast response time: typical less than 1ps from 0V to BV min Typical ID less than 1uA above 10V High temperature soldering: 250 C/10 seconds at terminals Plastic package has Underwrites Laboratory Flammability Classification 9.
SMLJ58A : MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com SMLJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 3000 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01% • Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types • Typical IR less than 1µA above 10V • High temperature so.
SMLJ58A-Q : UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) PPK IFSM 3000 300 Operating Temperature Range TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Mounted on 5.0 mm2 (0.03 mm thick) copper pads to each terminal. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Unit Watts Amps °C °C As.
SMLJ58C : MCC Features l l l l l l l l l l l omponents 21201 Itasca Street Chatsworth !"# $ % !"# SMLJ5.0 THRU SMLJ170CA Transient Voltage Suppressor 5.0 to 170 Volts 3000 Watt DO-214AB (SMLJ) (LEAD FRAME) G For surface mount application in order to optimize board space Low inductance Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Repetition Rate( duty cycle): 0.5% Fast response time: typical less than 1ps from 0V to BV min Typical ID less than 1uA above 10V High temperature soldering: 250 C/10 seconds at terminals Plastic package has Underwrites Laboratory Flammability Classification 9.
SMLJ58CA : UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) PPK IFSM 3000 300 Steady State Power Dissipation @ TL = 75 °C PM(AV) 5.0 Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) SMLJ5.0A ~ SMLJ90A SMLJ100A ~ SMLJ170A VF 3.5 5.0 Operating Temperature Range TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating.
SMLJ58CA : MCC Features l l l l l l l l l l l omponents 21201 Itasca Street Chatsworth !"# $ % !"# SMLJ5.0 THRU SMLJ170CA Transient Voltage Suppressor 5.0 to 170 Volts 3000 Watt DO-214AB (SMLJ) (LEAD FRAME) G For surface mount application in order to optimize board space Low inductance Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Repetition Rate( duty cycle): 0.5% Fast response time: typical less than 1ps from 0V to BV min Typical ID less than 1uA above 10V High temperature soldering: 250 C/10 seconds at terminals Plastic package has Underwrites Laboratory Flammability Classification 9.
SMLJ58CA : MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com SMLJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 3000 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01% • Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types • Typical IR less than 1µA above 10V • High temperature so.