MAX4594

MAX459 : The MAX458/MAX459 are crosspoint switches with eight input channels and four high-speed, buffered output channels. The MAX458 output buffer is configured with a gain of one, while the MAX459 buffer has a gain of two. In each device, any one of eight input lines can be connected to any of four output amplifiers. The output buffers are capable of driving loads of 75Ω. Data interface can be accomplished by either a 16-bit serial or a 6-bit parallel connection. In the serial mode, the MAX458/MAX459 are SPITM, QSPITM, and MicrowireTM compatible. In parallel mode, the MAX458/MAX459 are compatible with most microprocessor buses. Three-state amplifier output capability makes it possible to multiplex.

MAX4590 : Features The MAX4580/MAX4590/MAX4600 dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to 0.25Ω max and is flat (0.3Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 2.5nA max at +85°C. These analog switches are ideal in low-distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have low power requirements, require less board space, and are more reliable than mechanical relays. The MAX4580 has two NC (normally closed) switches, the MAX4590 has two NO (norma.

MAX4591 : The MAX4591/MAX4592/MAX4593 are high-speed, precision, quad, single-pole/single-throw (SPST) analog switches designed to operate at +12V or +15V. The MAX4591 has four normally closed (NC) switches, and the MAX4592 has four normally open (NO) switches. The MAX4593 has two NO and two NC switches. All three devices offer low leakage (100pA max) and fast switching speeds (tON ≤ 80ns, tOFF ≤ 45ns). With a +12V supply, the MAX4591/MAX4592/MAX4593 offer guaranteed 1Ω max channel-to-channel matching, 20Ω max on-resistance (RON), and 1.75Ω max RON flatness over the specified range. These switches are also fully specified for single +15V operation, with 16Ω max RON, 1.5Ω max RON match, and 1.5Ω max fl.

MAX4592 : Features The MAX4591/MAX4592/MAX4593 are high-speed, precision, quad, single-pole/single-throw (SPST) analog switches designed to operate at +12V or +15V. The MAX4591 has four normally closed (NC) switches, and the MAX4592 has four normally open (NO) switches. The MAX4593 has two NO and two NC switches. All three devices offer low leakage (100pA max) and fast switching speeds (tON ≤ 80ns, tOFF ≤ 45ns). With a +12V supply, the MAX4591/MAX4592/MAX4593 offer guaranteed 1Ω max channel-to-channel matching, 20Ω max on-resistance (RON), and 1.75Ω max RON flatness over the specified range. These switches are also fully specified for single +15V operation, with 16Ω max RON, 1.5Ω max RON match, and .

MAX4593 : Features The MAX4591/MAX4592/MAX4593 are high-speed, precision, quad, single-pole/single-throw (SPST) analog switches designed to operate at +12V or +15V. The MAX4591 has four normally closed (NC) switches, and the MAX4592 has four normally open (NO) switches. The MAX4593 has two NO and two NC switches. All three devices offer low leakage (100pA max) and fast switching speeds (tON ≤ 80ns, tOFF ≤ 45ns). With a +12V supply, the MAX4591/MAX4592/MAX4593 offer guaranteed 1Ω max channel-to-channel matching, 20Ω max on-resistance (RON), and 1.75Ω max RON flatness over the specified range. These switches are also fully specified for single +15V operation, with 16Ω max RON, 1.5Ω max RON match, and .

MAX4594 : The MAX4594–MAX4597 single-pole/single-throw (SPST) analog switches operate from a single +2.0V to +5.5V supply. The MAX4594/MAX4596 switches are normally open (NO), and the MAX4595/MAX4597 are normally closed (NC). The MAX4596/MAX4597 pinouts are optimized for the highest SC70 package off-isolation available. These switches have 10Ω max on-resistance (RON), with 1.5Ω max RON flatness over the analog signal range when powered from a +5V supply. The MAX4594–MAX4597 offer low 0.5nA leakage currents and fast switching times less than 40ns. They are packaged in an ultra-small 5-pin SC70 and 6-pin µDFN. ____________________________Features ♦ Available in 5-Pin SC70 and 6-Pin µDFN Packages ♦ 10Ω .

MAX4595 : The MAX4594–MAX4597 single-pole/single-throw (SPST) analog switches operate from a single +2.0V to +5.5V supply. The MAX4594/MAX4596 switches are normally open (NO), and the MAX4595/MAX4597 are normally closed (NC). The MAX4596/MAX4597 pinouts are optimized for the highest SC70 package off-isolation available. These switches have 10Ω max on-resistance (RON), with 1.5Ω max RON flatness over the analog signal range when powered from a +5V supply. The MAX4594–MAX4597 offer low 0.5nA leakage currents and fast switching times less than 40ns. They are packaged in an ultra-small 5-pin SC70 and 6-pin µDFN. ____________________________Features ♦ Available in 5-Pin SC70 and 6-Pin µDFN Packages ♦ 10Ω .

MAX4595 : The MAX4595 is a single-pole single-throw (SPST) analog switch that is designed to operate from 2 V to 5.5 V. This device can handle both digital and analog signals, and signals up to V+ can be transmitted in either direction. Applications D Sample-and-Hold Circuits D Battery-Powered Equipment (Cellular Phones, PDAs) D Audio and Video Signal Routing D Communication Circuits D PCMCIA Cards SOT-23 OR SC-70 PACKAGE (TOP VIEW) COM 1 NC 2 GND 3 5 V+ 4 IN FUNCTION TABLE NC TO COM, IN COM TO NC L ON H OFF Features D Low ON-State Resistance (10 W) D ON-State Resistance Flatness (1.5 W) D Control Inputs Are 5.5-V Tolerant D Low Charge Injection (5 pC Max) D 300-MHz −3-dB Bandwidth at 255C D Low.

MAX4596 : The MAX4596 is a single-pole single-throw (SPST) analog switch that is designed to operate from 2 V to 5 V. This device can handle both digital and analog signals, and signals up to V+ (peak) can be transmitted in either direction. Applications D Sample-and-Hold Circuits D Battery-Powered Equipment D Audio and Video Signal Routing D Communication Circuits SOT-23 OR SC-70 PACKAGE (TOP VIEW) IN 1 COM 2 GND 3 5 V+ 4 NO FUNCTION TABLE IN NO TO COM, COM TO NO L OFF H ON Features D Low ON-State Resistance (10 W) D ON-State Resistance Flatness (1.5 W) D Control Inputs Are 5.5-V Tolerant D Low Charge Injection (5 pC Max) D 300-MHz −3-dB Bandwidth at 255C D Low Total Harmonic Distortion (THD.

MAX4596 : The MAX4594–MAX4597 single-pole/single-throw (SPST) analog switches operate from a single +2.0V to +5.5V supply. The MAX4594/MAX4596 switches are normally open (NO), and the MAX4595/MAX4597 are normally closed (NC). The MAX4596/MAX4597 pinouts are optimized for the highest SC70 package off-isolation available. These switches have 10Ω max on-resistance (RON), with 1.5Ω max RON flatness over the analog signal range when powered from a +5V supply. The MAX4594–MAX4597 offer low 0.5nA leakage currents and fast switching times less than 40ns. They are packaged in an ultra-small 5-pin SC70 and 6-pin µDFN. ____________________________Features ♦ Available in 5-Pin SC70 and 6-Pin µDFN Packages ♦ 10Ω .

MAX4597 : The MAX4594–MAX4597 single-pole/single-throw (SPST) analog switches operate from a single +2.0V to +5.5V supply. The MAX4594/MAX4596 switches are normally open (NO), and the MAX4595/MAX4597 are normally closed (NC). The MAX4596/MAX4597 pinouts are optimized for the highest SC70 package off-isolation available. These switches have 10Ω max on-resistance (RON), with 1.5Ω max RON flatness over the analog signal range when powered from a +5V supply. The MAX4594–MAX4597 offer low 0.5nA leakage currents and fast switching times less than 40ns. They are packaged in an ultra-small 5-pin SC70 and 6-pin µDFN. ____________________________Features ♦ Available in 5-Pin SC70 and 6-Pin µDFN Packages ♦ 10Ω .

MAX4597 : .

MAX4598 : The MAX4598 low-voltage, CMOS analog IC is a configurable single-ended 8-to-1/differential 4-to-1 multiplexer. In addition to the input channels, both V+ and GND can be switched to the output channels, enabling the supply voltages to be monitored. The MAX4598 operates from a single +2.7V to +12V supply or from dual ±6V supplies. The device has low on-resistance (75Ω max) and TTL-compatible logic inputs from either ±5V or a single +5V supply. Each switch can handle Rail-to-Rail ® analog signals. The MAX4598 has two modes of operation: as a standard multiplexer and as a “latchable” multiplexer where the address lines are strobed. The off-leakage current is only 0.1nA at TA = +25°C and 2nA at T.

MAX4599 : The MAX4599 single-pole/double-throw (SPDT) switch operates from a +2.0V to +5.5V single supply. It offers 60Ω max on-resistance (RON) at +5V and fast switching times (tON = 30ns max, tOFF = 25ns max). The MAX4599 features excellent RON flatness (4Ω max) and matching (1Ω max) between channels. This device also offers 5pC max charge injection. The MAX4599 is available in tiny 6-pin SC70 and SOT23 packages. o Available in 6-Pin SC70 Package o 60Ω max (40Ω typ) On-Resistance o 1Ω max (0.2Ω typ) RON Matching Between Channels o 4Ω max (2.5Ω typ) RON Flatness o Fast Switching: tON = 30ns (max) tOFF = 25ns (max) o Guaranteed 5pC max Charge Injection o +2.0V to +5.5V Single-Supply Operation o 200MHz.