TLP714

TLP714F : Photocouplers GaAℓAs Infrared LED & Photo IC TLP714F TLP714F 1. Applications • Intelligent Power Module Signal Isolation • Factory Automation (FA) • Industrial Inverters 2. General The TLP714F is a photocoupler in a 6-pin SDIP package that consists of a GaAℓAs infrared light-emitting diode (LED) optically coupled to an integrated high-gain, high-speed photodetector IC chip. It provides guaranteed performance and specifications at temperatures up to 125. The TLP714F is physically smaller than the one in an 8-pin DIP package and compliant with international safety standards for reinforced insulation. It thus provides a smaller footprint solution for applications that require safety standard.

TLP715 : TOSHIBA PHOTOCOUPLER IRED & PHOTO-IC TLP715 Isolated Bus Drivers High Speed Line Receivers Microprocessor System Interfaces 4.58±0.25 654 TLP715 Unit: mm 6.8±0.25 +0.2 5 -0.20 The Toshiba TLP715 consists of an infrared emitting diode and an integrated high-gain, high-speed photodetector. This unit is a 6-pin SDIP. The TLP715 is 50% smaller than the 8-PIN DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring safety standard certification. The detector has a totem pole output stage to provide both source and sink driving. The detector IC has an internal shield that provides a guaran.

TLP715F : TOSHIBA PHOTOCOUPLER IRED & PHOTO-IC TLP715F Isolated Bus Drivers High Speed Line Receivers Microprocessor System Interfaces 4.58±0.25 654 TLP715F Unit: mm +0.2 5 −0.1 5 3. 9 The Toshiba TLP715F consists of an infrared emitting diode and an integrated high-gain, high-speed photodetector. This unit is a 6-pin SDIP. The TLP715F is 50% smaller than the 8-PIN DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring safety standard certification. The detector has a totem pole output stage to provide both source and sink driving. The detector IC has an internal shield that provides a guaran.

TLP716 : TOSHIBA Photocoupler IRED & Photo-IC TLP716 Plasma display panel High Speed Interface Factory Automation 4.58±0.25 654 TLP716 Unit: mm 6.8±0.25 +0.2 5 -0.20 The TOSHIBA TLP716 consists of an infrared emitting diode and a high speed photodetector. This unit is 6-lead SDIP. TLP716 is 50% smaller than 8PIN DIP and has suited the safety standard reinforced insulation class. So, mounting area in safety standard required equipment can be reduced. 123 +0.1 5 -0.25 7.62±0.25 4. 0 0.25 +0.10 -0.05 3.65  Inverter Logic (totempole output)  Package Type : SDIP6  Guaranteed Performance Over Temperature : -40 to 100°C  Power Supply Voltage: 4.5 to 5.5 V  Input Thresholds Current: IFHL = .

TLP716F : TOSHIBA Photocoupler IRED & Photo-IC TLP716F Plasma display panel High Speed Interface Factory Automation 4.58±0.25 654 TLP716F Unit: mm 6.8±0.25 +0.2 5 −0.1 5 3. 9 The TOSHIBA TLP716F consists of an infrared emitting diode and a high speed photodetector. This unit is 6-lead SDIP. TLP716F is 50% smaller than 8PIN DIP and has suited the safety standard reinforced insulation class. So, mounting area in safety standard required equipment can be reduced. 123 +0.1 5 −0.2 5 7.62±0.25 0.25± +0.10 −0.0 5 3.65  Inverter Logic (totempole output)  Package Type : SDIP6  Guaranteed Performance Over Temperature : -40 to 100°C  Power Supply Voltage: 4.5 to 5.5 V  Input Thresholds Current:.

TLP718 : TOSHIBA PHOTOCOUPLER IRED & PHOTO-IC TLP718 Isolated Bus Drivers High Speed Line Receivers Microprocessor System Interfaces 4.58±0.25 654 TLP718 Unit: mm 6.8±0.25 +0.2 5 −0.2 0 The Toshiba TLP718 consists of an infrared emitting diode and an integrated high-gain, high-speed photodetector. This unit is a 6-pin SDIP. The TLP718 is 50% smaller than the 8-PIN DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring safety standard certification. The detector has a totem pole output stage to provide both source and sink driving. The detector IC has an internal shield that provides a guaran.

TLP718F : TOSHIBA PHOTOCOUPLER IRED & PHOTO-IC TLP718F Isolated Bus Drivers High Speed Line Receivers Microprocessor System Interfaces 4.58±0.25 654 TLP718F Unit: mm +0.2 5 −0.1 5 3. 9 The Toshiba TLP718F consists of an infrared emitting diode and an integrated high-gain, high-speed photodetector. This unit is a 6-pin SDIP. The TLP718F is 50% smaller than the 8-PIN DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring safety standard certification. The detector has a totem pole output stage to provide both source and sink driving. The detector IC has an internal shield that provides a guaran.

TLP719 : TOSHIBA PHOTOCOUPLER IRED + PHOTO−IC TLP719 TLP719 Digital logic ground isolation Line receivers Microprocessor system interfaces Switching power supply feedback control Industrial invertors 4.58±0.25 654 Unit: mm 6.8±0.25 +0.2 5 −0.2 0 4. 0 The TOSHIBA TLP719 consists of a high-output infrared emitting diode and a highspeed detector. This unit is a 6-lead SDIP. The TLP719 is 50% smaller than the 8-pin DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring safety standard certification. The TLP719 has a Faraday shield integrated on the photodetector chip to provide an effective co.

TLP719F : TOSHIBA PHOTOCOUPLER IRED + PHOTO−IC TLP719F TLP719F Digital logic ground isolation Line receivers Microprocessor system interfaces Switching power supply feedback control Industrial invertors 4.58±0.25 654 Unit: mm 6.8±0.25 The TOSHIBA TLP719F consists of a high-output infrared emitting diode and a high-speed detector. +0.2 5 −0.1 5 +0.1 5 −0.2 5 This unit is a 6-lead SDIP. The TLP719F is 50% smaller than the 8-pin DIP and meets the reinforced insulation class requirements of international safety standards. Therefore the mounting area can be reduced in equipment requiring 123 3.65 7.62±0.25 3. 9 +0.1 0 −0.0 5 0.25± safety standard certification. The TLP719F has a Faraday sh.