NC7SP126 Datasheet PDF

NC7SP125 : The NC7SP125 is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power (ULP) series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V. The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP125, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC supply operat.

NC7SP125 : TinyLogic ULP-A Buffer with Three-State Output NC7SP125 The NC7SP125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 3.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power Down Protection • Source/Sink 2.6 mA at 3.3 V • Available in SC−88A and MicroPak™ Packages • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant DATA SHEET www.onsemi.com MARKING DIAGRAMS SIP6 1.45X1.0 MicroPak CASE 127EB CCKK XYZ Pin 1 CC = Specific Device Code KK = 2−Digit Lot Run Traceability Code XY = 2−.

NC7SP126 : The NC7SP126 is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power (ULP) series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC. The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP126, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC supply op.