| Part Number | FXLA108 |
| Manufacturer | ON Semiconductor |
| Title | Low-Voltage Dual-Supply 8-Bit Voltage Translator |
| Description | The FXLA108 is a configurable dual−voltage supply translator for both uni−directional and bi−directional voltage translation between two logic lev... |
| Features |
• Bi−Directional Interface Between Two Levels: from 1.1 V to 3.6 V • Fully Configurable: Inputs and Outputs Track VCC • Non−Preferential Power−Up; Either VCC May Be Powered Up First • Outputs Switch to 3−State if Either VCC is at GND • Power−Off Protection • Bus−Hold on Data Inputs Eliminates the Ne... |
| File Size | 168.30KB |
| Datasheet |
|
FXLA101 : The FXLA101 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in three-state as long as either VCC=0V, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing them in a 3-s.
FXLA102 : The FXLA102 is a configurable dual-voltage-supply translator designed for both uni-directional and bidirectional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level, and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V and 3.3V. The device remains in 3-state until both VCCs reach active levels, allowing either VCC to be powered-up first. Internal power down control circuits place the device in 3-state if either VCC is removed. The OE input, when high, disables both the A and B ports by placing.
FXLA102 : The FXLA102 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation betw een tw o logic levels. The device allow s translation betw een voltages as high as 3.6 V to as low as 1.1 V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allow s for bi-directional voltage translation over a variety of voltage levels: 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V. The device remains in three-state as long as either VCC=0 V, allow ing either VCC to be pow ered up first. Internal pow er-dow n control circuits place the device in 3-state if either VCC is removed. The /OE input, w hen HIGH, disables both the A and B ports by pla.
FXLA104 : The FXLA104 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in three-state as long as either VCC=0V, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing them in a 3-s.
FXLA104 : The FXLA104 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in three-state until both VCCs reach active levels, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing th.
FXLA108 : The FXLA108 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in three-state until both VCCs reach active levels, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing th.