Part Number | TIOL111 |
Manufacturer | Texas Instruments |
Title | IO-Link Transceivers |
Description | The TIOL111(x) family of transceivers implements the IO-Link interface for industrial bidirectional, point-topoint communication. When the device ... |
Features |
•1 7-V to 36-V Supply Voltage • PNP, NPN or IO-Link Configurable Output – IEC 61131-9 COM1, COM2 and COM3 Data Rate Support • Low Residual Voltage of 1.75 V at 250 mA • 50-mA to 350-mA Configurable Current Limit • Tolerant to ±65-V Transients 100 µs • Reverse Polarity Protection of up to 60 V on L... |
File Size | 1.25MB |
Datasheet |
|
TIOL1113 : The TIOL111(x) family of transceivers implements the IO-Link interface for industrial bidirectional, point-topoint communication. When the device is connected to an IO-Link master through a three-wire interface, the master can initiate communication and exchange data with the remote node while the TIOL111(x) acts as a complete physical layer for the communication. These devices are capable of withstanding up to 1.2 kV (500 Ω) of IEC 61000-4-5 surge and feature integrated reverse polarity protection. A simple pin-programmable interface allows easy interfacing to the controller circuits. The output current limit can be configured using an external resistor. Fault reporting and internal protect.
TIOL1115 : The TIOL111(x) family of transceivers implements the IO-Link interface for industrial bidirectional, point-topoint communication. When the device is connected to an IO-Link master through a three-wire interface, the master can initiate communication and exchange data with the remote node while the TIOL111(x) acts as a complete physical layer for the communication. These devices are capable of withstanding up to 1.2 kV (500 Ω) of IEC 61000-4-5 surge and feature integrated reverse polarity protection. A simple pin-programmable interface allows easy interfacing to the controller circuits. The output current limit can be configured using an external resistor. Fault reporting and internal protect.