1N6071A

1N6071 : 1N6036-1N6072A High-reliability discrete products and engineering services since 1977 TRANSIENT VOLTAGE SUPPRESSOR DIODES FEATURES  Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Rating Power dissipation Tclamping (0 volts to V(BR) min) Operating temperature Steady state power dissipation Repetition rate (duty cycle) Value 1500 Watts @ 25°C Less than 100 picoseconds -65°C to +175°C 1.0 Watts @ TL = 25°C, ⅜” from body .01% ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part number Rated Sta.

1N6071 : 1500 Watt Bidirectional Transient Voltage Suppressor Data Sheet 1N6036A-1N6072A Product Overview This popular Transient Voltage Suppressor (TVS) series for 1N6036 through 1N6072A are JEDEC registered selections for bidirectional devices. All have the same high peak pulse power rating of 1500 W with extremely fast response times. They are also available in military qualified selections per MIL-PRF-19500/507 as described in Figure 1. They are most often used for protecting against transients from inductive switching environments, induced RF effects, or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5. They are also very successful in protecting airborne avio.

1N6071 : 1N6036 - 1N6072A series 1N60 SERIES (1500 WATT) METAL AXIAL TRANSIENT VOLTAGE SUPPRESSORS (hermetically sealed package for harsh industrial environments) FEATURES q Breakdown voltage range 6.8 - 200 volts q Glass passivated junction q Excellent clamping capability q Low zener impedance q 100% surge tested q -55°C to +150°C q Hermetically sealed q Bi-directional MAXIMUM RATING q Peak Pulse Power (Ppk): 15000 Watts (10 x 1000µs)@25°C (see diagram on page 3 for wave form) q 1 watt steady state q Response time: 1 x 10-12 seconds (theoretical) q Operating & storage temperature: -55°C to +150°C MECHANICAL CHARACTERISTICS q Case: Metal hermetically sealed DO-13 package q Terminals: Axial leads, so.

1N6071A : 1N6036-1N6072A High-reliability discrete products and engineering services since 1977 TRANSIENT VOLTAGE SUPPRESSOR DIODES FEATURES  Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.  Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Rating Power dissipation Tclamping (0 volts to V(BR) min) Operating temperature Steady state power dissipation Repetition rate (duty cycle) Value 1500 Watts @ 25°C Less than 100 picoseconds -65°C to +175°C 1.0 Watts @ TL = 25°C, ⅜” from body .01% ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Part number Rated Sta.

1N6071A : 1N6036 - 1N6072A series 1N60 SERIES (1500 WATT) METAL AXIAL TRANSIENT VOLTAGE SUPPRESSORS (hermetically sealed package for harsh industrial environments) FEATURES q Breakdown voltage range 6.8 - 200 volts q Glass passivated junction q Excellent clamping capability q Low zener impedance q 100% surge tested q -55°C to +150°C q Hermetically sealed q Bi-directional MAXIMUM RATING q Peak Pulse Power (Ppk): 15000 Watts (10 x 1000µs)@25°C (see diagram on page 3 for wave form) q 1 watt steady state q Response time: 1 x 10-12 seconds (theoretical) q Operating & storage temperature: -55°C to +150°C MECHANICAL CHARACTERISTICS q Case: Metal hermetically sealed DO-13 package q Terminals: Axial leads, so.