DatasheetsPDF.com

TSL2541


Part Number TSL2541
Manufacturer ams
Title Light-to-Digital Sensor
Description The TSL2541 is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct ...
Features 2 output channels, a visible channel and an IR channel. The visible channel has a photodiode with a UV and IR blocking filter whereas the IR channel has a photodiode with an IR pass filter. Each channel has a dedicated data converter producing a 16-bit output. This architecture allows applications t...

File Size 559.61KB
Datasheet TSL2541 PDF File






Similar Datasheet

TSL254 : The TSL253 and TSL254 are light-to-voltage optical converters, each combining a 1-mm-square photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, and 1 MΩ respectively) on a single monolithic IC. Output voltage is directly proportional to the light intensity (irradiance) on the photodiode. These devices use silicon-gate CMOS technology that provides improved amplifier offset-voltage stability and low power consumption. Functional Block Diagram – Voltage + Output Terminal Functions TERMINAL NAME NO. GND 1 OUT 3 VDD 2 DESCRIPTION Ground (substrate). All voltages are referenced to GND. Output voltage Supply voltage www.taosinc.com Texas Advantced Optoelectronic Solu.

TSL2540 : The TSL2540 is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The ALS sensor features 2 output channels, a visible channel and an IR channel. The visible channel has a photodiode with a UV and IR blocking filter whereas the IR channel has a photodiode with an IR pass filter. Each channel has a dedicated data converter producing a 16-bit output. This architecture allows applications to accurately measure ambient light which enables devices to calculate illuminance to control a display backlight. Ordering Information and Content Guide appear at end of datasheet. Figure 1: Added Value of Using TS.

TSL254R : 123 GND VDD OUT The TSL254R is a light-to-voltage optical sensor combining a photodiode and a transimpedance amplifier (feedback resistor = 1 MΩ) on a single monolithic IC. Output voltage is directly proportional to the light intensity (irradiance) on the photodiode. The device has improved amplifier offset-voltage stability and low power consumption and is supplied in a 3-lead clear plastic sidelooker package with an integral lens. When supplied in the lead (Pb) free package, the device is RoHS compliant. Functional Block Diagram − Voltage + Output Available Options DEVICE TSL254R TSL254R TSL254R TA 0°C to 70°C 0°C to 70°C 0°C to 70°C PACKAGE − LEADS 3-lead Sidelooker 3-lead Sideloo.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)