NC7SP19 Datasheet PDF

NC7SP125 : The NC7SP125 is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power (ULP) series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V. The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP125, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC supply operat.

NC7SP125 : TinyLogic ULP-A Buffer with Three-State Output NC7SP125 The NC7SP125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 3.0 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power Down Protection • Source/Sink 2.6 mA at 3.3 V • Available in SC−88A and MicroPak™ Packages • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant DATA SHEET www.onsemi.com MARKING DIAGRAMS SIP6 1.45X1.0 MicroPak CASE 127EB CCKK XYZ Pin 1 CC = Specific Device Code KK = 2−Digit Lot Run Traceability Code XY = 2−.

NC7SP126 : The NC7SP126 is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power (ULP) series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC. The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP126, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC supply op.

NC7SP126 : .

NC7SP14 : The NC7SP14 is a single inverter with Schmitt trigger input from Fairchild’s Ultra Low Power (ULP) Series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC . The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP14, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC s.

NC7SP14 : TinyLogic ULP-A Inverter with Schmitt-Trigger Input NC7SP14 The NC7SP14 is a single inverter with Schmitt−Trigger Input in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 2.6 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power Down Protection • Source/Sink 2.6 mA at 3.3 V • Available in SC−88A and MicroPak™ Packages • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant DATA SHEET www.onsemi.com MARKING DIAGRAMS SIP6 1.45X1.0 MicroPak CASE 127EB Pin 1 CCKK XYZ CC = Specific Device Code KK = 2−Digit Lot Run Traceability Code .

NC7SP157 : The NC7SP157 is a single 2-Input Non-Inverting Multiplexer from Fairchild’s Ultra Low Power (ULP) Series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC . The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP157, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC s.

NC7SP157 : TinyLogic ULP-A 2-Input Non-Inverting Multiplexer NC7SP157 The NC7SP157 is a 2−input non−inverting multiplexer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 2.9 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power Down Protection • Source/Sink 2.6 mA at 3.3 V • Available in SC−88 and MicroPak™ Packages • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant I1 1 GND 2 I0 3 6S 1 I1 1 5 VCC 0 GND 2 4Z I0 3 6S 5 VCC 4Z SC−88 MicroPak Figure 1. Pinout Diagrams (Top Views) S www.onsemi.com MARKING DIAGRAMS SIP6 1.45X.

NC7SP158 : The NC7SP158 is a single 2-Input Inverting Multiplexer from Fairchild’s Ultra Low Power (ULP) Series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC . The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP158, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC suppl.

NC7SP17 : The NC7SP17 is a single buffer with Schmitt trigger input from Fairchild’s Ultra Low Power (ULP) Series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC . The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP17, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC sup.

NC7SP17 : TinyLogic ULP-A Buffer with Schmitt-Trigger Input NC7SP17 The NC7SP17 is a single buffer with Schmitt−Trigger Input in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 2.6 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power Down Protection • Source/Sink 2.6 mA at 3.3 V • Available in SC−88A and MicroPak™ Packages • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant NC 1 A2 5 VCC NC 1 A2 6 VCC 5 NC GND 3 4Y GND 3 4Y SC−88A MicroPak Figure 1. Pinout Diagrams (Top Views) DATA SHEET www.onsemi.com MARKING DIAGRAMS SIP6 1..

NC7SP19 : The NC7SP19 is a single 1-of-2 decoder/demultiplexer from Fairchild’s Ultra Low Power (ULP) Series of TinyLogic. Ideal for applications where battery life is critical, this product is designed for ultra low power consumption within the VCC operating range of 0.9V to 3.6V VCC . The internal circuit is composed of a minimum of inverter stages, including the output buffer, to enable ultra low static and dynamic power. The NC7SP19, for lower drive requirements, is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve best in class speed operation while maintaining extremely low CMOS power dissipation. Features s 0.9V to 3.6V VCC supply o.