| Part Number | LT8418 |
| Manufacturer | Analog Devices |
| Title | 100V Half-Bridge GaN Driver |
| Description | The LT8418 is a 100V half-bridge GaN driver that integrates top and bottom driver stages, driver logic control, and protections. It can be configu... |
| Features |
Half-Bridge Gate Driver for GaN FETs 0.6Ω Pull-Up Resistance at Top Gate Driver 0.2Ω Pull-Down Resistance at Bottom Gate Driver 4A Peak Source, 8A Peak Sink Current Capability Smart Integrated Bootstrap Switch Split-Gate-Driver to Adjust Turn-On/Turn-Off Strength Default Low-State for ... |
| File Size | 680.64KB |
| Datasheet |
|
LT8410 : The LT®8410/LT8410-1 are ultralow power boost converters with integrated power switch, Schottky diode and output disconnect circuitry. The parts control power delivery by varying both the peak inductor current and switch offtime. This control scheme results in low output voltage ripple as well as high efficiency over a wide load range. The quiescent current is a low 8.5μA, which is further reduced to 0μA in shutdown. The internal disconnect circuitry allows the output voltage to be blocked from the input during shutdown. High value (12.4M/0.4M) resistors are integrated on chip for output voltage detection, significantly reducing input referred quiescent current. The LT8410/ LT8410-1 also fea.
LT8410-1 : The LT®8410/LT8410-1 are ultralow power boost converters with integrated power switch, Schottky diode and output disconnect circuitry. The parts control power delivery by varying both the peak inductor current and switch offtime. This control scheme results in low output voltage ripple as well as high efficiency over a wide load range. The quiescent current is a low 8.5μA, which is further reduced to 0μA in shutdown. The internal disconnect circuitry allows the output voltage to be blocked from the input during shutdown. High value (12.4M/0.4M) resistors are integrated on chip for output voltage detection, significantly reducing input referred quiescent current. The LT8410/ LT8410-1 also fea.
LT8415 : The LT®8415 is an ultralow power boost converter with two integrated complementary MOSFET half-bridges (N- and P-channel), integrated power switch, Schottky diode and output disconnect circuitry. The N-channel and P-channel MOSFETs in each half-bridge are synchronously controlled by a single input pin, and never turn on at the same time in typical applications. The boost regulator controls power delivery by varying both the peak inductor current and switch off-time. This control scheme results in low output voltage ripple as well as high efficiency over a wide load range. The quiescent current is a low 10.5μA, which is further reduced to 0μA in shutdown. The internal disconnect circuitry all.