DTC114EE Datasheet PDF

DTC114E : DTC114E SERIES Bias Resistor Transistor NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the TO–92 package which is designed for through hole applications. http://onsemi.com Preferred Devices NPN SILICON .

DTC114E : , at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R206-047.K .

DTC114E : DTC114E series NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors) Datasheet Parameter VCC IC(MAX.) R1 R2 Value 50V 100mA 10kW 10kW lFeatures 1) Built-In Biasing Resistors, R1 = R2 = 10kW. 2) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see inner circuit). 3) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of completely eliminating parasitic effects. 4) Only the on/off conditions need to be set for operation, making the circuit design easy. 5) Complementary PNP Types :DTA114E series 6) Complex transistors.

DTC114EA3 : CYStech Electronics Corp. NPN Digital Transistors (Built-in Resistors) DTC114EA3 Spec. No. : C351A3 Issued Date : 2003.08.20 Revised Date :2003.09.29 Page No. : 1/6 Features • Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). • The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. • Only the on/off conditions need to be set for operation, making device design easy. • Complements the DTA114EA3 Equivalent Circuit DTC114EA3 Outline TO-92 R1=10kΩ , R2=10 kΩ IN(.

DTC114EB : 100mA / 50V Digital transistors (with built-in resistors) DTC114EB / DTC114EM / DTC114EE / DTC114EUA / DTC114EKA zApplications Inverter, Interface, Driver zFeatures 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3) Only the on/off conditions need to be set for operation, making the device design easy. zStructure NPN epitaxial planar silicon transistor (Resistor built-in type) zDimensions (Unit : mm).

DTC114EC3 : CYStech Electronics Corp. NPN Digital Transistors (Built-in Resistors) DTC114EC3 Spec. No. : C351C3 Issued Date : 2010.12.31 Revised Date : 2018.02.13 Page No. : 1/6 Features • Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). • The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. • Only the on/off conditions need to be set for operation, making device design easy. • Complements the DTA114EC3 • Pb-free lead plating and halogen-free package Equivalent Circuit .

DTC114ECA : Production specification Digital Transistor DTC(R1=R2 SERIES)CA FEATURES  Epitaxial planar die construction.  Complementary PNP types available(DTA). Pb Lead-free  Built-in biasing resistors,R1=R2.  Also available in lead free version. APPLICATIONS  The NPN style digital transistor. ORDERING INFORMATION Type No. Marking DTC114ECA DTC124ECA DTC143ECA DTC144ECA 24 25 23 26 SOT-23 Package Code SOT-23 SOT-23 SOT-23 SOT-23 MAXIMUM RATING @ Ta=25℃ unless otherwise specified Symbol Parameter VCC Supply Voltage Input Voltage DTC114ECA VIN DTC124ECA DTC143ECA DTC144ECA Output Current DTC114ECA IO DTC124ECA DTC143ECA DTC144ECA IC(Max.) Output current ALL PD Power Di.

DTC114ECA : DTC114ECA SOT-23 DIGITAL TRANSISTOR TRANSISTORS(NPN) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors.(see equivalent circuit). * The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. * Only the on/off conditions need to be set for operation marking device design easy. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-O rate flame retardant * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.008 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTER.

DTC114ECA : SMD Type Transistors NPN Digital Transistors DTC (R1 = R2 Series)ECA (KDTC (R1 = R2 Series)ECA) ■ Features ● Epitaxial Planar Die Construction ● Built-In Biasing Resistors, R1 = R2 ● Complementary PNP Types Available +0.12.4 -0.1 SOT-23 2.9 +0.1 -0.1 0.4 +0.1 -0.1 3 12 0.95 +0.1 -0.1 1.9 +0.1 -0.1 +0.11.3 -0.1 0.55 0.4 Unit: mm 0.1 +0.05 -0.01 +0.10.97 -0.1 R1 IN R2 IN OUT GND OUT GND 1.IN (B) 2.GND (E) 3.OUT (C) 0-0.1 +0.10.38 -0.1 P/N DTC123ECA (KDTC123ECA) DTC143ECA (KDTC143ECA) DTC114ECA (KDTC114ECA) DTC124ECA (KDTC124ECA) DTC144ECA (KDTC144ECA) DTC115ECA (KDTC115ECA) R1, R2 (NOM) MARKING 2.2K 4.7K 10K 22K 47K 100K N04 N08 N13 N17 N20 N24 ■ Absolute Maximum Ratings Ta .

DTC114ECA : DTC114ECA NPN 100mA 50V Digital Transistors (Bias Resistor Built-in Transistors) Parameter VCC IC(MAX.) R1 R2 Value 50V 100mA 10kΩ 10kΩ lFeatures 1) Built-In Biasing Resistors, R1 = R2 = 10kΩ 2) Built-in bias resistors enable the configuration of 　an inverter circuit without connecting external 　input resistors (see inner circuit) . 3) Only the on/off conditions need to be set 　for operation, making the circuit design easy. 4) Complementary PNP Types: DTA114ECA lOutline SOT-23 　 　 　　 　　 (SST3) 　 　 　 　 　　　　　　　　 lInner circuit Datasheet lApplication INVERTER, INTERFACE, DRIVER lPackaging specifications Part No. Package DTC114ECA SOT-23 (SST3) Package size 2924 　　　　　　　　　　　　　.

DTC114ECA : DTC114EE/DTC114EUA/DTC114EKA /DTC114ESA/DTC114ECA Elektronische Bauelemente Digital Transistors NPN (Built-in Resistors) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). * Only the on/off confitions need to be set for operation making device design easy. * The bias resistors consis of thin-film resistors with compete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. External dimensions (Units:mm ) SOT-523 SOT-323 SOT-323 SOT-23 www.DataSheet4U.com SOT-23-3L TO-92S Absolute maximum ratings(Ta=25℃) Param.

DTC114ECA : Digital transistors (built-in resistors) • Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thinfilm resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3) Only the on/ off conditions need to be set for operation, making device design easy. • Structure PNP digital transistor (with built-in resistors) •Equivalent circuit 2.9 + 0.2 1.9+ 0.2 0.95+0.95 (1) (2) DTC114EKA DTC114ECA 1.1 + - 0.2 0.1 0.8 + 0.1 0 ~ 0.1 2.8+ 0.2 0.2 0.1 + - 1.6 .

DTC114ECA : JIANGSU CHANGJIANG ELECTRONICS TECHNOLOGY CO., LTD Digital transistors (built-in resistors) DTC114EM/DTC114EE/DTC114EUA DTC114EKA /DTC114ECA /DTC114ESA DIGITAL TRANSISTOR (NPN) FEATURES 1. Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit) 2. The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input.They also have the advantage of almost completely eliminating parasitic effects 3. Only the on/off conditions need to be set for operation, making device design easy PIN CONNENCTIONS AND MARKING DTC114EE DTC114EUA SOT-523 Addreviated symbol: 24 Addrev.

DTC114ECA : DTC114 EM/EE/EUA/ECA/ESA NPN Small Signal Transistor Small Signal Diode Features —Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistor (see equivalent circuit). —The bias resistors consist of thin -film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. —Only the on/off conditions need to be set for operation,marking device design easy. — Green compound (Halogen free) with suffix "G" on packing code and prefix "G" on date code. Ordering Information Package SOT-723 SOT-523 SOT-323 SOT-23 TO-92S Part No. DTC114 EM DTC114 EE DT.

DTC114ECA : DTC114EE/DTC114EUA/DTC114ECA DTC114EKA/DTC114ESA Digital Transistor(NPN) Features 1. Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit). 2. The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input.They also have the advantage of almost completely eliminating parasitic effects. 3. Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTC114EE DTC114EUA SOT-523 Addreviated symbol: 24 Addreviated symbol: 24 DTC114EKA SOT-23 SOT-23-3L Addreviated symbol: 24 DTC114ESA SOT-323 Addreviat.

DTC114ECA : MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) • Epoxy meets UL 94 V-0 flammability rating • Moisure Sensitivity Level 1 • Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors • The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. • Only the on/off conditions need to be s.

DTC114EE : Production specification Digital Transistor DTC(R1=R2 SERIES)E FEATURES Pb  Epitaxial planar die construction. Lead-free  Complementary NPN types available(DTC).  Built-in biasing resistors,R1=R2.  Also available in lead free version. APPLICATIONS  The NPN style digital transistor. ORDERING INFORMATION Type No. Marking DTC114EE DTC124EE DTC143EE DTC144EE 24 25 23 26 SOT-523 Package Code SOT-523 SOT-523 SOT-523 SOT-523 MAXIMUM RATING @ Ta=25℃ unless otherwise specified Symbol Parameter VCC Supply Voltage Input Voltage VIN Output Current IO DTC114EE DTC124EE DTC143EE DTC144EE DTC114EE DTC124EE DTC143EE DTC144EE IC(Max.) Output current ALL PD Power Dissipation RθJ.