| Part Number | RED360 |
| Manufacturer | LSI Computer Systems |
| Title | AC LINE FREQUENCY DIVIDERS |
| Description | OF OPERATION: The counter advances by one on each negative transition of the input clock pulse as long as the Enable signal is High and the Reset ... |
| Features |
• Clock input pulse shaper accepts 50Hz/60Hz sine wave directly • Fully static counter operation • +4.5V to +15V operation (VDD - VSS) • Low power dissipation • High noise immunity • Reset • Input Enable • 50Hz/60Hz division select input • Output low power TTL compatible at +4.5V operation • Square... |
| File Size | 35.75KB |
| Datasheet |
|
RED3600 : OF OPERATION: The counter advances by one on each negative transition of the input clock pulse as long as the Enable signal is High and the Reset signal is Low. When the Enable signal is Low the input clock pulses will be inhibited and the counter will be held at the state it was in prior to bringing the Enable Low. A High Reset signal clears the counter to zero count. Depending on the device used, a Low on the Division Select input will cause a Divide by 6, 60, 120, 360, 600 or 3600. A High on the Division Select will cause a Divide by 5, 50, 100, 300, 500 or 3000. All outputs are 50% duty cycle except RED 5, where output is low for two clocks and high for three clocks. CLOCK INPUT If input.