7400

740 : This Power MOSFET is produced using advanced planar stripe DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficiency switched mode power supplies, active power factor correction based on half bridge topology. 740 VDSS RDS(ON) ID 400V 0.55Ω 10.5A Features • 10.5A, 400V, RDS(on) = 0.55Ω @VGS = 10 V • Low gate charge ( typical 30nC) • Fast switching • 100% avalanche tested • Improved dv/dt capability Ordering Information PART NUMBER PACKAGE BRAND 740 TO-220 0GFD www.goford.cn TEL：.

740-12-1A-xxxx-xx : 74 AUTOMOTIVE POWER RELAY FEATURES l High performance l 6.3mm Flat Terminals l Current rating up to 40A l Suitable Couplers available l Optional Sealing Model Areas of Application Contact Configuration Contact Material Contact Rating at 230C - 12VDC (Res.) : : NO : NC : Electrical Life Operations Min. Mechanical Life Operations Min. Contact Voltage Drop at 10 A (Min) Ma ximum Switching Current @ 12.8 VDC For 3 Sec. *Under introduction www.DataSheet4U.com Nominal Coil Power Operating Power Operate Time** Release Time** : : : : APPLICATION l Horn Control l Starter Motors l Defogger l Radiator Fan l A/C Controls l Security Systems TECHNICAL DATA FOR CONTACT SIDE : : 74 1A/1C Silver Nickel 30.

740-12-1C-xxxx-xx : 74 AUTOMOTIVE POWER RELAY FEATURES l High performance l 6.3mm Flat Terminals l Current rating up to 40A l Suitable Couplers available l Optional Sealing Model Areas of Application Contact Configuration Contact Material Contact Rating at 230C - 12VDC (Res.) : : NO : NC : Electrical Life Operations Min. Mechanical Life Operations Min. Contact Voltage Drop at 10 A (Min) Ma ximum Switching Current @ 12.8 VDC For 3 Sec. *Under introduction www.DataSheet4U.com Nominal Coil Power Operating Power Operate Time** Release Time** : : : : APPLICATION l Horn Control l Starter Motors l Defogger l Radiator Fan l A/C Controls l Security Systems TECHNICAL DATA FOR CONTACT SIDE : : 74 1A/1C Silver Nickel 30.

740-24-1A-xxxx-xx : 74 AUTOMOTIVE POWER RELAY FEATURES l High performance l 6.3mm Flat Terminals l Current rating up to 40A l Suitable Couplers available l Optional Sealing Model Areas of Application Contact Configuration Contact Material Contact Rating at 230C - 12VDC (Res.) : : NO : NC : Electrical Life Operations Min. Mechanical Life Operations Min. Contact Voltage Drop at 10 A (Min) Ma ximum Switching Current @ 12.8 VDC For 3 Sec. *Under introduction www.DataSheet4U.com Nominal Coil Power Operating Power Operate Time** Release Time** : : : : APPLICATION l Horn Control l Starter Motors l Defogger l Radiator Fan l A/C Controls l Security Systems TECHNICAL DATA FOR CONTACT SIDE : : 74 1A/1C Silver Nickel 30.

740-24-1C-xxxx-xx : 74 AUTOMOTIVE POWER RELAY FEATURES l High performance l 6.3mm Flat Terminals l Current rating up to 40A l Suitable Couplers available l Optional Sealing Model Areas of Application Contact Configuration Contact Material Contact Rating at 230C - 12VDC (Res.) : : NO : NC : Electrical Life Operations Min. Mechanical Life Operations Min. Contact Voltage Drop at 10 A (Min) Ma ximum Switching Current @ 12.8 VDC For 3 Sec. *Under introduction www.DataSheet4U.com Nominal Coil Power Operating Power Operate Time** Release Time** : : : : APPLICATION l Horn Control l Starter Motors l Defogger l Radiator Fan l A/C Controls l Security Systems TECHNICAL DATA FOR CONTACT SIDE : : 74 1A/1C Silver Nickel 30.

7400 : SN74LS00 Quad 2-Input NAND Gate • ESD 3500 Volts VCC 14 13 12 11 10 9 8 http://onsemi.com LOW POWER SCHOTTKY 1 2 3 4 5 6 7 GND GUARANTEED OPERATING RANGES Symbol VCC TA IOH IOL Parameter Supply Voltage Operating Ambient Temperature Range Output Current – High Output Current – Low Min 4.75 0 Typ 5.0 25 Max 5.25 70 – 0.4 8.0 Unit V °C mA mA 14 1 PLASTIC N SUFFIX CASE 646 14 1 SOIC D SUFFIX CASE 751A ORDERING INFORMATION Device SN74LS00N SN74LS00D Package 14 Pin DIP 14 Pin Shipping 2000 Units/Box 2500/Tape & Reel © Semiconductor Components Industries, LLC, 1999 1 December, 1999 – Rev. 6 Publication Order Number: SN74LS00/D SN74LS00 DC CHARACTERISTICS OVER OPERATING TEMPERATURE RAN.

7400 : This device contains four independent gates each of which performs the logic NAND function. Ordering Code: Order Number DM74LS00M DM74LS00SJ DM74LS00N Package Number M14A M14D N14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y = AB Inputs A L L H H H = HIGH Logic Level L = LOW Logic Level Output B L H L H Y H H H L © 2000 Fairchild Semiconductor Corporation DS006439 .

7400 : .

7401 : .

7401-4658 : ENGINEERING DATA SHEET 7401-4658 CONTACTOR 1PST-DM, 400 AMP Non latching solenoid design power contactor Qualified to MIL-PRF-6106 MS24185-D1 AN-3380-1 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 400 Amps / 28 Vdc Weight 1180g max. Dimensions of case 139.7mm x 62mm x 44.3mm max. Special units available upon request. APPLICATION NOTES: 101 102 103G 007 CONTACT ELECTRICAL CHARACTERISTICS Minimum operating cycles Contact rating per pole and load type 50,000 cycles 50,000 cycles 50,000 cycles resistive inductive (L/R=5ms) motor 50,000 cycles minimum current (Amps) Load Current in Amps @28Vdc 400 100 400 40 Featuring LEACH© power and control solutions www.esterline.

74017 : www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com .

7402 : .

7403 : The 74HC/HCT7403 are high-speed Si-gate CMOS devices. They are specified in compliance with JEDEC standard no.7A. The “7403” is an expandable, First-In First-Out (FIFO) memory organized as 64 words by 4 bits. A guaranteed 15 MHz data-rate makes it ideal for high-speed applications. A higher data-rate can be obtained in applications where the status flags are not used (burst-mode). With separate controls for shift-in (SI) and shift-out (SO), reading and writing operations are completely independent, allowing synchronous and asynchronous data transfers. Additional controls include a master-reset input (MR), an output enable input (OE) and flags. The data-in-ready (DIR) and data-out-ready (DOR).

7403 : The TDA7403 is a high performance signal processor specifically designed for car radio applications focused on the low-end market. The device includes a complete audioprocessor and a stereo decoder with noiseblanker. Switched-capacitors design technique allows to obtain all these features without external components or adjustments. Using TDA7403 results is in a very performant low-cost signal processing BLOCK DIAGRAM SM ORDERING NUMBER: TDA7403D application The device is fully programmable by I2C bus interface allowing to customize key device parameters and especially filter characteristics. The BICMOS process combined with the optimized signal processing assure low noise and low distortio.

7403 : This device contains four independent gates each of which performs the logic NAND function. The open-collector outputs require external pull-up resistors for proper logical operation. Pull-Up Resistor Equations Where: N1 (IOH) = total maximum output high current for all outputs tied to pull-up resistor N2 (IIH) = total maximum input high current for all inputs tied to pull-up resistor N3 (IIL) = total maximum input low current for all inputs tied to pull-up resistor Ordering Code: Order Number DM7403N Package Number N14A Package Description 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Connection Diagram Function Table Y = AB Inputs A L L H H H = HIGH Logic Leve.

7404 : The M54/74HC04 is a high speed CMOS HEX INVERTER fabricated in silicon gate C2MOS technology. It has the same high speed performance of LSTTL combined with true CMOS low power consumption. The internal circuit is composed of 3 stages including buffer output, which enables high noise immunity and stable output. All inputs are equipped with circuits against static discharge and transient excess voltage. INPUT AND OUTPUT EQUIVALENT CIRCUIT NC = No Internal Connection December 1992 1/9 Free Datasheet http://www.datasheet4u.com/ M54/M74HC04 TRUTH TABLE A L H Y H L IEC LOGIC SYMBOL PIN DESCRIPTION PIN No 1, 3, 5, 9, 11, 13 2, 4, 6, 8, 10, 12 7 14 SYMBOL 1A to 6A 1Y to 6Y GND VCC NAME AND FUN.