Part Number
|
TDA1517ATW |
Manufacturer
|
NXP |
Description
|
8 W BTL or 2 x 4 W SE power amplifier |
Published
|
Apr 23, 2005 |
Detailed Description
|
INTEGRATED CIRCUITS
DATA SHEET
TDA1517ATW 8 W BTL or 2 × 4 W SE power amplifier
Product specification Supersedes data o...
|
Datasheet
|
TDA1517ATW
|
Overview
INTEGRATED CIRCUITS
DATA SHEET
TDA1517ATW 8 W BTL or 2 × 4 W SE power amplifier
Product specification Supersedes data of 2001 Feb 14 File under Integrated Circuits, IC01 2001 Apr 17
Philips Semiconductors
Product specification
8 W BTL or 2 × 4 W SE power amplifier
FEATURES • Requires very few external components • Flexibility in use: mono Bridge-Tied Load (BTL) and stereo Single-Ended (SE); it should be noted that in stereo applications the outputs of both amplifiers are in opposite phase • High output power • Low offset voltage at output (important for BTL) • Fixed gain • Good ripple rejection • Mode select switch (operating, mute and standby) • AC and DC short-circuit safe to ground and ...
Similar Datasheet